Master Index

Click letter for quick access:
[Special Characters] [Numbers] A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

L

label
implementing with Application Builder AppBuilder

Ladebug debugger
        Ada language debugging support Ladebug
        aliases Ladebug
        C++ language debugging support Ladebug
        COBOL language debugging support Ladebug
        commands Ladebug
        core file debugging Ladebug
        crash dump analysis Ladebug
        features Ladebug
        Fortran language debugging support Ladebug
        kernel debugging Ladebug
        multiprocess application debugging Ladebug
        scripts Ladebug
        shared libraries debugging Ladebug

lagconfig command
lack of support for LAN interconnect ClusHWConfig (Sec. 6.1), ClusTechOver (Sec. 7.7)

LAN emulation
See LANE

LAN interconnect
        comparision to Memory Channel ClusTechOver (Sec. 7.0)
        ensuring all active adapters are on the same switch ClusHWConfig (Sec. 6.3.3)
        fully redundant ClusHWConfig (Sec. 6.1), ClusHWConfig (Sec. 6.3.3), ClusHWConfig (Sec. B.0), ClusTechOver (Sec. 7.7)
        hardware requirements ClusHWConfig (Sec. 6.1), ClusTechOver (Sec. 7.7)
        maintaining ClusHWConfig (Sec. 6.3.3)
        migrating from Fast Ethernet to Gigabit Ethernet ClusAdmin (Sec. D.7)
        migrating from Memory Channel to ClusAdmin (Sec. D.5), ClusAdmin (Sec. D.6)
        monitoring ClusAdmin (Sec. D.4)
        rules and restrictions ClusHWConfig (Sec. 6.1), ClusTechOver (Sec. 7.7)
        tuning ClusAdmin (Sec. D.2)

LAN setup for DMS SharingSW (Sec. 10.4)

LAN setup for RIS SharingSW (Sec. 3.4)

LANE
        characteristics NetAdminConnect (Sec. 6.1.2)
        configuring with ATM NetAdminConnect (Sec. 6.3.3)
        managing the environment NetAdminConnect (Sec. 6.4.4)
        planning configuration with ATM NetAdminConnect (Sec. 6.2.3.3)

language announcement
in programs InternatProg (Sec. 1.1)

language support
installing InstallGdeAdvTop (Sec. 2.0)

lastcomm command SystemAdmin (Sec. 10.5.9)

LAT TechOver (Sec. 3.4.9)
        configuring with latsetup NetAdminConnect (Sec. 9.3.1)
        creating your own service NetAdminConnect (Sec. 9.4.5)
        dedicated tty device on a terminal NetAdminConnect (Sec. 9.4.6)
        devices NetAdminConnect (Sec. 9.2.3)
        gateway service NetAdminConnect (Sec. 9.4.4)
        host-initiated connection NetAdminConnect (Sec. 9.4.2)
        outgoing connections NetAdminConnect (Sec. 9.4.3)
        printer setup NetAdminConnect (Sec. 9.4.1)
        troubleshooting NetAdminConnect (Sec. 10.10)

latsetup command NetAdminConnect (Sec. 9.3.1)

layered applications
installing and deleting ClusAdmin (Sec. 5.14)

layered product
documentation for DocOverview (Sec. 1.6)

layered product kit ProdKitGde (Sec. 1.1)
        building subsets and control files ProdKitGde (Sec. 3.0)
        directory structure ProdKitGde (Sec. 2.0)
        producing distribution media ProdKitGde (Sec. 6.2), ProdKitGde (Sec. 7.3)

ld command ProgGde (Sec. 2.5.2)

LDAP
password SecAdminGde (Sec. 1.4.2), SecAdminGde (Sec. D.0)

learp command NetAdminConnect (Sec. 6.4.4.2)

lex program ProgSupTools (Sec. 4.0)

lexicon CLangRef

libc.so default C library ProgGde (Sec. 2.5.3)

libexc exception library ProgGde (Sec. 11.0)

library
        See also shared library
        ANSI C standard CLangRef
        linking programs with ProgGde (Sec. 2.5.3)
        run-time ProgGde (Sec. 2.5.3)
        TLI NetProgGde (Sec. 3.2.2)
        XTI NetProgGde (Sec. 3.2.2)

library call
sockets NetProgGde (Sec. 4.2.3.2)

library function
for extensions to kdbx debugger KernelDebug (Sec. 3.2)

library routine
for writing kdbx extensions KernelDebug (Sec. 3.2)

libtli.a library NetProgGde (Sec. 3.2.2)

libxti.a library NetProgGde (Sec. 3.2.2)

license
        activity LicenseManage (Sec. 1.4.2)
        availability LicenseManage (Sec. 1.4.1)
        booting without ClusAdmin (Sec. 11.1.1)
        canceling LicenseManage (Sec. 2.8)
        cluster requirements ClusInstall (Sec. 1.5)
        deleting LicenseManage (Sec. 2.9)
        disabling LicenseManage (Sec. 2.5)
        enabling LicenseManage (Sec. 2.6)
        issuing LicenseManage (Sec. 2.7)
        loading LicenseManage (Sec. 2.3)
        registering LicenseManage (Sec. 2.2)
        unlimited LicenseManage (Sec. 2.1)
        unloading LicenseManage (Sec. 2.4)
        updating LicenseManage (Sec. 2.10)

license-checking function LicenseManage (Sec. 1.1)

license database for LMF LicenseManage (Sec. 1.1)

License Management Facility
See LMF

license terms and conditions LicenseManage (Sec. 1.2)

license unit LicenseManage (Sec. 1.1)

License Unit Requirement Table
See LURT

link
in CDE help file CDEHelp

link aggregation ClusHWConfig (Sec. 6.1), ClusHWConfig (Sec. B.0), ClusHWConfig (Sec. B.1), ClusTechOver (Sec. 7.7), NetAdminConnect (Sec. 2.1.1.3)
configuring NetAdminConnect (Sec. 2.4.3)

link resiliency ClusHWConfig (Sec. 6.1), ClusHWConfig (Sec. B.2), ClusTechOver (Sec. 7.7)

linkage CLangRef

linking files CommandShellGde (Sec. 3.4)

lint
coding problem checker ProgGde (Sec. 6.0)

listing directory contents CommandShellGde (Sec. 3.1)

.lita section AsmLangGde (Sec. 6.3.2)

literal characters
        using backslash CommandShellGde (Sec. 7.4.4.1)
        using double quotes CommandShellGde (Sec. 7.4.4.3)
        using single quotes CommandShellGde (Sec. 7.4.4.2)

little-endian
byte ordering AsmLangGde (Sec. 1.2)

LMF LicenseManage (Sec. 1.0)
        activity license LicenseManage (Sec. 1.4.2)
        availability license LicenseManage (Sec. 1.4.1)
        commands LicenseManage (Sec. 2.0)
        license checking LicenseManage (Sec. 1.6)
        license database LicenseManage (Sec. 1.1)
        license terms and conditions LicenseManage (Sec. 1.2)
        license units LicenseManage (Sec. 1.1)
        license-checking function LicenseManage (Sec. 1.1), LicenseManage (Sec. 1.6)
        LURT LicenseManage (Sec. 1.1)
        OSF_USR license LicenseManage (Sec. 2.1)
        PAAM LicenseManage (Sec. 1.5.2), LicenseManage (Sec. 2.10)

lmf reference page LicenseManage (Sec. 1.1)

lmf utility LicenseManage (Sec. 1.1)

lmfsetup script LicenseManage (Sec. 1.1)

ln command CommandShellGde (Sec. 3.4), CommandShellGde (Sec. 3.4.3)

load balancing ClusAdmin (Sec. 9.3.3)
        alias and application ClusAdmin (Sec. 3.1)
        CFS ClusAdmin (Sec. 9.3)
        cluster alias and application ClusAdmin (Sec. 3.14), ClusAdmin (Sec. 3.9)

Local Area Transport
See LAT

local management service
in DLPI NetProgGde (Sec. 2.2.1)

locale CDEInternatProg, CommandShellGde (Sec. C.1), InternatProg (Sec. 1.1.1), SystemAdmin (Sec. 3.2), TechOver (Sec. 8.2)
        binding to run-time InternatProg (Sec. 2.5)
        building and testing InternatProg (Sec. 6.4)
        categories of CommandShellGde (Sec. C.4.1)
        creating InternatProg (Sec. 6.0), TechOver (Sec. 8.3)
        determining which locale is set CommandShellGde (Sec. C.3)
        effect on date and time format CommandShellGde (Sec. C.2.2)
        effect on messages CommandShellGde (Sec. C.2.4)
        effect on software CommandShellGde (Sec. C.2)
        managing CDEInternatProg
        multibyte and single byte CDEProgOverview
        numeric and monetary format in CommandShellGde (Sec. C.2.3)
        setting InternatGde (Sec. 1.3)
        yes/no response strings CommandShellGde (Sec. C.2.5)

localization
See also internationalization
and software development InternatProg (Sec. 1.1.1)

localized catalog and resource files CDEInternatProg

localized desktop session
configuring CDEAdvUsr
running CDEUser

localized resource CDEInternatProg

localized text CDEInternatProg

location and area
setting during full installation InstallGde (Sec. 6.10)

lock
accessing CDECompanion (Sec. 3.1)
complex KernelModules (Sec. 8.0)

lockinfo utlity
gathering locking statistics SystemTune (Sec. 2.4.1)

locking methods
        choosing KernelModules (Sec. 6.4)
        comparing simple and complex locks KernelModules (Sec. 6.3)
        complex lock KernelModules (Sec. 6.0)
        simple lock KernelModules (Sec. 6.0)

logging in CommandShellGde (Sec. 1.1)
        specifying a language CDECompanion (Sec. 2.3.1)
        specifying a session CDECompanion (Sec. 2.3.2)
        to a CDE session CDEUser

logging out
of a CDE session CDEUser
of a session CommandShellGde (Sec. 1.2)

logical partition
configuring HWMgmt (Sec. 6.3)

Logical Storage Manager
See LSM

login account CommandShellGde (Sec. 5.1.1)

.login login script
modifying for System V Habitat CommandShellGde (Sec. 9.1)

Login Manager CDECompanion (Sec. 2.3)
configuring CDEAdvUsr

login program CommandShellGde (Sec. 7.5.1)

login screen CDEAdvUsr
selecting options CDECompanion (Sec. 1.1)

login script
        .cshrc script CommandShellGde (Sec. 7.6)
        .kshrc script CommandShellGde (Sec. 7.6)
        .login script CommandShellGde (Sec. 7.6)
        .profile script CommandShellGde (Sec. 7.6)

login server CDEAdvUsr

logout script CommandShellGde (Sec. 7.9)

loopback mount
lack of support in cluster ClusAdmin (Sec. 7.6.2.4)

lpd daemon SystemAdmin (Sec. 8.5.3)

lpq command CommandShellGde (Sec. 3.3), CommandShellGde (Sec. 3.3)

lpr command ClusAdmin (Sec. 7.3), CommandShellGde (Sec. 3.3)
printing files CommandShellGde (Sec. 3.3)

lprm command CommandShellGde (Sec. 3.3)

lprsetup command ClusAdmin (Sec. 1.2)

lptest command SystemAdmin (Sec. 8.7)

ls command CommandShellGde (Sec. 3.1)

LSM TechOver (Sec. 2.4)
        addvol command and ClusAdmin (Sec. 1.2)
        bootable tape utility and StorageManager (Sec. 3.4.1)
        cluster support for ClusTechOver (Sec. 2.8)
        configuring during full installation InstallGde (Sec. 4.1.3)
        devices on private buses StorageManager (Sec. 2.2.2)
        DRL StorageManager (Sec. 2.1)
        encapsulating swap device StorageManager (Sec. 3.4.2.1.3)
        EVM and StorageManager (Sec. 6.0)
        improving performance SystemTune (Sec. 9.3)
        initializing StorageManager (Sec. 3.0), StorageManager (Sec. 3.2)
        installing StorageManager (Sec. 3.0)
        interlocking support restriction in a cluster ClusAvailApp (Sec. 7.3)
        log size StorageManager (Sec. 2.1.1)
        log subdisk sizes StorageManager (Sec. 2.1)
        managing objects StorageManager (Sec. 5.0)
        managing plexes StorageManager (Sec. 5.4.11)
        managing subdisks StorageManager (Sec. 5.5.8.2)
        moving disk groups between systems StorageManager (Sec. 7.2)
        quorum disk ClusAdmin (Sec. 10.1)
        RAID 5 ClusAdmin (Sec. 10.1)
        restrictions on LSM in a cluster ClusAdmin (Sec. 10.1)
        special processing during full installation InstallGde (Sec. 6.14.4.2)
        Storage Administrator StorageManager (Sec. A.0)
        storage connectivity StorageManager (Sec. 2.2.1)
        troubleshooting StorageManager (Sec. 5.6.5)
        uninstalling StorageManager (Sec. 7.6)
        upgrading StorageManager (Sec. 3.0)
        verifying initialization StorageManager (Sec. 3.3)

LSM daemon StorageManager (Sec. 3.5.2)
monitoring StorageManager (Sec. 6.2)

LSM device driver StorageManager (Sec. 3.5.2)

LSM directory StorageManager (Sec. 3.5.2)

LSM disk StorageManager (Sec. 1.1)

LSM file StorageManager (Sec. 3.5.2)

LSM interface StorageManager (Sec. 1.1.6.5)

LSM license StorageManager (Sec. 3.1)

LSM object StorageManager (Sec. 1.0)

LSM software subset StorageManager (Sec. 3.0)

LSM volume
        configuring for a file system StorageManager (Sec. 4.4.3)
        managing StorageManager (Sec. 5.3.3.2)
        migrating legacy StorageManager (Sec. 7.1.6)

LURT LicenseManage (Sec. 1.1)

lvalue CLangRef