MULTIA, SYSTEM_MGMT, Tools for booting OpenVMS on Multia systems Unsupported files for use of OpenVMS on Multia Alpha Systems Complete instructions are included IN the kits. PLEASE READ THE INSTRUCTIONS BEFORE PROCEEDING. This directory includes various versions of files that will likely allow OpenVMS hobbyists to bootstrap OpenVMS on the Multia (Alpha) system. Limitations: o Many; please read the instructions in the kit for details. o There is absolutely no support for OpenVMS on Multia. o If the kit does not work, you are entirely on your own. Reading the instructions might help, but there is NO support. o Kits are highly version-specific, and are available only for specific OpenVMS releases. As of this writing, all available kits are included here and no other kits are planned, nor is there any expectation of any new kits for any other OpenVMS releases. o The PCMCIA support was completely removed, because the Intel chip on the Multia was not compatable with the Cirrus chip on the Alphabook. This means, of course, that you will not see and cannot use any PCMCIA cards on a Multia. o The Multia uses shared interrupts, and as a result, a special ZLXp-E series graphics device driver -- one that does not use interrupts -- is needed. This driver is provided in the kit. o The serial lines don't work. o If you have a Multia with a PCI slot, you can't use any PCI card that requires interrupts. o The SRM console on this system is very old and very fragile. (This SRM console was designed only and strictly for diagnostic use, and was not particularly tested or used with OpenVMS.) YOU MUST USE THE PROVIDED SRM CONSOLE. o If things don't work for you, don't expect to see any OpenVMS updates, nor SRM console updates, nor any support. That said, these files have been occasionally found to work, and even to permit the operation of DECwindows on Multia. Pointers to Multia information are included in the OpenVMS FAQ.