Thu Oct 6 01:11:08 1994 Richard Stallman * Version 19.28 released. * configure.in: Determine HAVE_X11R6. Sun Sep 11 14:56:01 1994 Richard Stallman * Version 19.27 released. Wed Sep 7 03:53:50 1994 Richard Stallman * Version 19.26 released. Sun Sep 4 03:02:15 1994 Richard Stallman * configure.in: Check for lrand48, not rand48. Sat Sep 3 18:44:55 1994 Richard Stallman * configure.in (powerpc-ibm-aix3.1*, powerpc-ibm-aix3.2.5) (powerpc-ibm-aix*): New aliases. Sun Aug 21 14:02:00 1994 Richard Stallman * make-dist (src/m, src/s): Put *.inp in distribution. Fri Aug 19 20:01:09 1994 Richard Stallman * configure.in: Accept i586 and i486 along with i386. Mon Aug 15 05:18:12 1994 Richard Stallman * configure.in: Do compute unexec, LIBX, system_malloc, etc even if CPP env var was set by the user. * configure.in (i[34]86-*-*): For SCO 3.2v4, fix NON_GNU_CPP value. Sun Aug 14 00:10:08 1994 Jonathan I. Kamens (jik@gza-client1.aktis.com) * Makefile.in: Uninstall "$(EMACS)", not "emacs". Sat Aug 13 16:34:59 1994 Richard Stallman * configure.in (i[34]86-*-*): For SCO 3.2v4, set NON_GNU_CPP. Tue Aug 9 23:20:18 1994 Richard Stallman * configure.in: Check more specifically for i*86-sun-sunos. Wed Aug 3 21:53:58 PDT 1994 Caveh Jalali (caveh@eng.sun.com) * configure.in: Handle solaris 2.4. Wed Jul 27 13:34:18 1994 Richard Stallman * configure.in (rand48): Check for it. Tue Jul 26 15:52:58 1994 Richard Stallman * make-dist: Update the info files. Mon Jul 25 16:35:16 1994 Richard Stallman * configure.in: Make "checking..." messages' style consistent. (HAVE_H_ERRNO): New test. Sun Jul 24 16:18:09 1994 Richard Stallman * configure.in (i860-*-sysv4*): Set NON_GNU_CC and NON_GNU_CPP. Tue Jul 12 00:03:39 1994 Richard Stallman (rms@mole.gnu.ai.mit.edu) * configure.in (CFLAGS): If the envvar was specified, use that. And set REAL_CFLAGS from it too. Mon Jul 11 16:28:51 1994 Richard Stallman (rms@mole.gnu.ai.mit.edu) * make-dist: Update finder-inf.el. Thu Jul 7 12:57:42 1994 Richard Stallman (rms@mole.gnu.ai.mit.edu) * make-dist (msdos): Include sed4.inp in dist. * Makefile.in (libsrc_libs): Var deleted. Wed Jul 6 22:39:26 1994 Richard Stallman (rms@mole.gnu.ai.mit.edu) * Makefile.in (mkdir, removenullpaths): Put g in sed replace commands. Sun Jun 26 12:26:40 1994 Richard Stallman (rms@mole.gnu.ai.mit.edu) * configure.in (mips-sony-newsos4*): New alias. Thu Jun 23 15:21:14 1994 Richard Stallman (rms@mole.gnu.ai.mit.edu) * configure.in (*-convex-bsd*): Set NON_GNU_CPP. (*-convex-convexos*): Accept this as alias. Sun Jun 19 11:40:01 1994 Richard Stallman (rms@mole.gnu.ai.mit.edu) * configure.in: Get CFLAGS both with and without THIS_IS_CONFIGURE, for two different uses. Wed Jun 15 22:30:18 1994 Richard Stallman (rms@mole.gnu.ai.mit.edu) * configure.in: Define THIS_IS_CONFIGURE when extracting CFLAGS etc. Tue Jun 14 10:51:06 1994 Richard Stallman (rms@mole.gnu.ai.mit.edu) * make-dist: Put ./BUGS into the distrib. Mon Jun 13 17:12:32 1994 Richard Stallman (rms@mole.gnu.ai.mit.edu) * configure.in: Handle 386 running Solaris 2. Mon Jun 6 04:46:27 1994 Richard Stallman (rms@mole.gnu.ai.mit.edu) * configure.in (mips-siemens-sysv*): Use cpp, not cc -E. Sun Jun 5 06:44:16 1994 Richard Stallman (rms@mole.gnu.ai.mit.edu) * configure.in (mips-sony-newsos*): Use news-risc.h. * configure.in: Accept bsdi as opsys, like bsd386. Wed Jun 1 20:03:31 1994 Morten Welinder (terra@diku.dk) * config.bat (src/paths.h): Use sed script msdos/sed4.inp. Mon May 30 04:33:36 1994 Richard Stallman (rms@mole.gnu.ai.mit.edu) * Version 19.25 released. * make-dist (shortversion): Don't assume another period follows. Fri May 27 01:45:34 1994 Richard Stallman (rms@mole.gnu.ai.mit.edu) * Makefile.in (install-arch-indep): Use /bin/pwd uniformly, not pwd. (uninstall): Use /bin/pwd. * Makefile.in (blessmail): Depend on src. (all): Don't depend on blessmail. * Makefile.in (src/paths.h): Don't force recomputation. (paths-force): New target; force recomputation of paths.h. (all): Depend on paths-force. (src, lib-src): Depend on src/paths.h. * configure.in (*-sun-sunos4*): Set GCC_TEST_OPTIONS, NON_GCC_TEST_OPTIONS. Thu May 26 05:04:55 1994 Richard Stallman (rms@mole.gnu.ai.mit.edu) * configure.in: Don't insist on subversions for irix. Tue May 24 00:03:58 1994 Richard Stallman (rms@mole.gnu.ai.mit.edu) * configure.in (hppa*-hp-hpux9shr): Move alternative up. * configure.in (i[34]86-next-*): New alternative. Mon May 23 03:07:50 1994 Richard Stallman (rms@mole.gnu.ai.mit.edu) * Version 19.24 released. * configure.in: New config hppa*-hp-hpux9shr*. Sun May 22 18:30:22 1994 Morten Welinder (terra@tyr.diku.dk) * config.bat: Doc fix. Sat May 21 03:17:49 1994 Richard Stallman (rms@mole.gnu.ai.mit.edu) * Makefile.in (mostlyclean, clean, distclean, realclean) (extraclean): Don't act on man subdir if it doesn't exist. Fri May 20 18:03:56 1994 Richard Stallman (rms@mole.gnu.ai.mit.edu) * configure.in (GCC_TEST_OPTIONS, NON_GCC_TEST_OPTIONS): New vars. Use them to set up CC. (*-sun-sunos4.1.3): Set them. Thu May 19 11:54:43 1994 Richard Stallman (rms@mole.gnu.ai.mit.edu) * Makefile.in (lib-src): Don't depend on src/paths.h. Wed May 18 01:35:38 1994 Richard Stallman (rms@mole.gnu.ai.mit.edu) * build-ins.in (copydests): Get rid of spurious `-'s. * configure.in: Define EMACS_CONFIGURATION instead of CONFIGURATION. Tue May 17 00:41:00 1994 Richard Stallman (rms@mole.gnu.ai.mit.edu) * Version 19.23 released. * configure.in [HAVE_X11]: Merge $C_SWITCH_X_SITE into CFLAGS for the Xlib and Xt checks; then restore old CFLAGS. Sun May 15 01:20:57 1994 Richard Stallman (rms@mole.gnu.ai.mit.edu) * configure.in (HAVE_X11XTR6): Add newline before #if. Add newline after #endif. Fri May 13 17:01:41 1994 Richard Stallman (rms@mole.gnu.ai.mit.edu) * configure.in (HAVE_X11XTR6): Arrange to define it. Thu May 12 06:51:21 1994 Richard Stallman (rms@mole.gnu.ai.mit.edu) * Makefile.in (install): Depend on blessmail. Thu May 12 03:35:55 1994 David J. MacKenzie (djm@nutrimat.gnu.ai.mit.edu) * configure.in (mips-siemens-sysv*): Put quotes around value containing blanks. Wed May 11 22:20:51 1994 Richard Stallman (rms@mole.gnu.ai.mit.edu) * Makefile.in (TAGS): Use the makefile in src subdir. Tue May 10 16:50:14 1994 Roland McGrath (roland@churchy.gnu.ai.mit.edu) * configure.in (opsys): Recognize `gnu'. Tue May 10 16:08:30 1994 Richard Stallman (rms@mole.gnu.ai.mit.edu) * configure.in (using NON_GNU_CPP): Fix test for CPP already set. Mon May 9 10:24:59 1994 David J. MacKenzie (djm@nutrimat.gnu.ai.mit.edu) * configure.in: Remove AC_LANG_C call. Not needed with Autoconf version > 1.8. Sun May 8 07:35:11 1994 Morten Welinder (terra@diku.dk) * config.bat: Forcibly remove "# " style comments from makefiles. Sun May 8 15:50:34 1994 Richard Stallman (rms@mole.gnu.ai.mit.edu) * Makefile.in (uninstall): When processing lispdir and etcdir, do nothing unless it exists and is a directory. Fri May 6 19:21:54 1994 Richard Stallman (rms@mole.gnu.ai.mit.edu) * Makefile.in (install-arch-indep): Do install info/dired-x*. Merge code in from install-doc. (install-doc): Merge code back into install-arch-indep. (install-arch-dep): Don't depend on install-doc. * configure.in (run_in_place): Don't use pwd for archlibdir and docdir. Wed May 4 15:40:03 1994 Richard Stallman (rms@mole.gnu.ai.mit.edu) * configure.in (making src/Makefile and lib-src/Makefile): Split off the autoconf substitutions and don't pass them thru cpp. (undefs): Use $canonical as well as $configuration. * make-dist: Distribute lisp/Makefile. * configure.in: Recognize m88k-dg-dgux5.4.3* and m88k-dg-dgux5.4.2*. Use lower case names for the s files. Fri May 3 12:01:09 1994 Morten Welinder (terra@diku.dk) * config.bat: Added possibility for different file name transscriptions in lib-src. Tue May 3 04:17:46 1994 Richard Stallman (rms@mole.gnu.ai.mit.edu) * Makefile.in (lib-src): Undo previous change. (blessmail): New target to run maybe-blessmail in lib-src. (all): Depend on blessmail. * Makefile.in (lib-src): Depend on src. Sat Apr 30 15:28:58 1994 Paul Reilly (pmr@churchy.gnu.ai.mit.edu) * configure.in (m88k-dg-dgux5.4R3): Use dgux5-4R3. (m88k-dg-dgux5.4R2): dgux5.4R2. Fri Apr 29 15:25:39 1994 Richard Stallman (rms@mole.gnu.ai.mit.edu) * configure.in (window_system): Restore accidentally deleted code that uses AC_FIND_X. * make-dist: Distribute config.bat. Fri Apr 29 00:38:09 1994 Morten Welinder (terra@diku.dk) * config.bat: Corrected the configuration of lib-src to keep up with configure. Add note about dos version 3 or better needed (djgpp needs that). Add note explaining that either install in c:/emacs or edit the script. Don't change to c:/emacs, but assume we're there (to minimize the number of places to change). * config.bat: Build-in the first step towards X11 support with the X11 emulator that exists. At this time it won't work, and several files are missing. Thu Apr 28 00:13:00 1994 Richard Stallman (rms@mole.gnu.ai.mit.edu) * configure.in: Use m/hp800.h in place of m/hp9000s800.h. Don't look for -lresolv. * Makefile.in (lib-src): Depend on src/paths.h. Wed Apr 27 01:12:44 1994 Richard Stallman (rms@mole.gnu.ai.mit.edu) * configure.in: Restore deleted AC_SUBST of `configuration'. Improve error message for bad --with-x-toolkit value. * configure.in: Define CONFIGURATION in src/config.h rather than substituting in src/Makefile.in. Tue Apr 26 18:05:01 1994 Karl Heuer (kwzh@hal.gnu.ai.mit.edu) * Makefile.in (install-doc): New target. (install-arch-dep): Depend on install-doc. (mkdir): Create docdir. Fri Apr 22 21:39:24 1994 Richard Stallman (rms@mole.gnu.ai.mit.edu) * configure.in: Test for libresolv.a. Substitute machfile and opsysfile. Fri Apr 22 21:03:11 1994 Karl Heuer (kwzh@hal.gnu.ai.mit.edu) * Makefile.in (.PHONY, install): Kill reference to obsolete do-install. (install-arch-dep): Install under the name $(EMACS). Thu Apr 21 02:06:52 1994 Richard Stallman (rms@mole.gnu.ai.mit.edu) * configure.in (version): Use entire value of emacs-version. (mips-siemens-sysv*): New alternative. Tue Apr 19 19:12:35 1994 Richard Stallman (rms@mole.gnu.ai.mit.edu) * Makefile.in (install-arch-indep): Don't install dired-x*. Mon Apr 18 20:39:12 1994 Karl Heuer (kwzh@hal.gnu.ai.mit.edu) * configure.in (src/Makefile, lib-src/Makefile): Delete ^L. Fix definition of $undefs. Sun Apr 17 20:02:17 1994 Richard Stallman (rms@mole.gnu.ai.mit.edu) * configure.in (window_system): Obey --with-x11=no and --with-x10=no. * configure.in (lib-src/Makefile.in): Use src, not lib-src, in -I. Sat Apr 16 15:02:02 1994 David J. MacKenzie (djm@nutrimat.gnu.ai.mit.edu) * configure.in: Call AC_LANG_C, if it's defined, after AC_PREPARE. Sat Apr 16 00:22:39 1994 Richard Stallman (rms@mole.gnu.ai.mit.edu) * configure.in (lib-src/Makefile.in): Make this from Makefile.in.in and run it thru cpp, as with src/Makefile.in. * configure.in: Use AC_SET_MAKE. Fri Apr 15 21:08:30 1994 Richard Stallman (rms@mole.gnu.ai.mit.edu) * configure.in (i[34]86-ncr-sysv*): Use usg5-4-2. Wed Apr 13 13:51:27 1994 Richard Stallman (rms@mole.gnu.ai.mit.edu) * Makefile.in (MAKE): Don't just assign it--use @SET_MAKE@. * configure.in (CFLAGS): Exclude ${CFLAGS} from singlequotes. (printing the choices): Make the toolkit message unconditional. (USE_X_TOOLKIT): Use `none', not `no', if none. (include libsrc_libs): Include config.h, and specify -I for srcdir. Get rid of temp file foofoo1. Wed Apr 13 13:12:30 1994 Karl Heuer (kwzh@hal.gnu.ai.mit.edu) * configure.in (CFLAGS): Use shell syntax, not Makefile. Tue Apr 12 11:23:19 1994 Richard Stallman (rms@mole.gnu.ai.mit.edu) * configure.in (window_system): If no X, set USE_X_TOOLKIT=no. (printing the choices): State choice of toolkit. (libsrc_libs): Recalculate after writing config.h; then update lib-src/Makefile. Mon Apr 11 21:55:23 1994 Richard Stallman (rms@mole.gnu.ai.mit.edu) * configure.in: Add sunos4shr as alternative for suns. Conditionals testing for null $CC were backwards. Sun Apr 10 05:08:40 1994 Richard Stallman (rms@mole.gnu.ai.mit.edu) * make-dist (msdos): Don't link patch1. Link sed*.inp, not sed.in*. Sat Apr 9 17:42:22 1994 Richard Stallman (rms@mole.gnu.ai.mit.edu) * configure.in: Handle -isc4.0*. Wed Mar 30 23:39:00 1994 Richard Stallman (rms@mole.gnu.ai.mit.edu) * configure.in (esix5): Set NON_GNU_CPP. Thu Mar 24 18:41:36 1994 Roland McGrath (roland@mole.gnu.ai.mit.edu) * Makefile.in (thisdir): Nonsensical variable removed. (install-arch-indep): Set shell var thisdir=`pwd` before cd and cd back to $thisdir, rather than the directory `this_dir'. Thu Mar 17 19:31:18 1994 Roland McGrath (roland@churchy.gnu.ai.mit.edu) * Makefile.in (install-arch-indep): Add missing backslash after a `then'. Mon Mar 14 17:06:48 1994 Richard Stallman (rms@mole.gnu.ai.mit.edu) * Makefile.in (thisdir): New variable. (install-arch-indep): Go back to thisdir to run INSTALL_DATA. Tue Mar 8 17:37:19 1994 Karl Heuer (kwzh@hal.gnu.ai.mit.edu) * configure.in: Add freebsd. Tue Mar 8 01:52:10 1994 Roland McGrath (roland@churchy.gnu.ai.mit.edu) * configure.in: Check for fpathconf. Wed Mar 2 00:56:50 1994 Karl Heuer (kwzh@hal.gnu.ai.mit.edu) * configure.in (with_x_toolkit): Fix typo in previous change. Tue Mar 1 22:21:55 1994 Karl Heuer (kwzh@hal.gnu.ai.mit.edu) * configure.in: New s-file for rs60000-ibm-aix3.2.5. Sat Feb 26 17:04:11 1994 Richard Stallman (rms@mole.gnu.ai.mit.edu) * configure.in (with_x_toolkit): Don't allow motif or open-look. Thu Feb 24 16:16:10 1994 Karl Heuer (kwzh@hal.gnu.ai.mit.edu) * configure.in: Fix value of docdir. * Makefile.in (install-arch-indep): Install DOC* in docdir. Thu Feb 24 15:41:16 1994 Richard Stallman (rms@mole.gnu.ai.mit.edu) * configure.in (*-sysv4.1): Set NON_GNU_CPP. Tue Feb 22 19:05:02 1994 Karl Heuer (kwzh@geech.gnu.ai.mit.edu) * configure.in: New variable docdir to control where the docstring file goes. Makefile.in: Use it to initialize PATH_DOC in paths.h. Tue Feb 22 16:52:54 1994 Karl Heuer (kwzh@mole.gnu.ai.mit.edu) * configure.in: When --run-in-place, don't inherit archlibdir. Sat Feb 19 22:23:11 1994 Richard Stallman (rms@mole.gnu.ai.mit.edu) * Makefile.in (install-arch-dep, install-arch-indep): New targets split up former do-install rule. (do-install): Target deleted. Wed Feb 16 21:16:54 1994 Richard Stallman (rms@mole.gnu.ai.mit.edu) * configure.in (mips-sony-newsos*): New configuration. Mon Feb 14 11:38:35 1994 Frederic Pierresteguy (fp@mole.gnu.ai.mit.edu) * configure.in (rs6000-bull-bosx*): Added support for BULL dpx20. Fri Feb 11 21:27:09 1994 Karl Heuer (kwzh@mole.gnu.ai.mit.edu) * configure.in: Fix misspelled symbol LD_SWITCH_X_SITE_AUX. Fri Feb 11 16:29:11 1994 Richard Stallman (rms@mole.gnu.ai.mit.edu) * configure.in: Don't initialize CC. Thu Feb 10 21:48:39 1994 Roland McGrath (roland@churchy.gnu.ai.mit.edu) * configure.in (creating src/Makefile): Also generate -U switches for symbols in the $configuration value. * configure.in: Check for sys_siglist being declared in system header. Thu Feb 10 14:32:21 1994 Richard Stallman (rms@mole.gnu.ai.mit.edu) * configure.in (creating src/Makefile): Delete blank lines along with lines of whitespace. (m68k-motorola-sysv*, m68000-motorola-sysv*): Compute proper CC value. Wed Feb 9 16:02:00 1994 Richard Stallman (rms@mole.gnu.ai.mit.edu) * configure.in: Get, use, and substitute C_SWITCH_MACHINE like C_SWITCH_SYSTEM. (m68*-motorola-sysv*): Set CC. Require cpu type to be m68k or m68000. Fri Feb 4 15:21:29 1994 Karl Heuer (kwzh@mole.gnu.ai.mit.edu) * configure.in (drem): Check for this function. Thu Feb 3 00:53:53 1994 Richard Stallman (rms@mole.gnu.ai.mit.edu) * configure.in (Using NON_GNU_CPP): Don't lose if it has spaces. If CPP was inherited from environment, don't use NON_GNU_CPP. (NON_GNU_CC): Likewise. (handling with_gcc): Use explicit if in the `no' case. (cc_specified): New variable; if set, don't use NON_GNU_CC. Wed Feb 2 17:34:19 1994 Richard Stallman (rms@mole.gnu.ai.mit.edu) * configure.in (mips-mips-riscos4*): Set NON_GNU_CPP. Tue Feb 1 18:16:09 1994 Karl Heuer (kwzh@mole.gnu.ai.mit.edu) * configure.in: Check whether fmod exists. Mon Jan 31 18:57:56 1994 Roland McGrath (roland@churchy.gnu.ai.mit.edu) * make-dist: Distribute {src,lisp}/ChangeLog.? instead of {src,lisp}/OChangeLog. Sat Jan 22 18:18:23 1994 Roland McGrath (roland@churchy.gnu.ai.mit.edu) * configure.in: Restore Jan 8 and Jan 16 changes. The -U hack is necessary for proper operation. This code works with the current released version of Autoconf. Fri Jan 21 01:36:39 1994 Richard Stallman (rms@mole.gnu.ai.mit.edu) * configure.in (with_x_toolkit): Treat values athena and lucid alike. (USE_X_TOOLKIT): Define it for all values except `no'. * configure.in: Undo first Jan 8 change and Jan 16 change. Tue Jan 18 18:47:51 1994 Richard Stallman (rms@mole.gnu.ai.mit.edu) * configure.in: Handle --with-x-toolkit. Produce lwlib/Makefile. Substitute USE_X_TOOLKIT as both C macro and Make variable. * Makefile.in (lwlib/Makefile): New target. (SUBDIR_MAKEFILES): Depend on lwlib/Makefile. (clean, mostlyclean, distclean, realclean): Handle lwlib subdir. (unlock, relock): Handle lwlib subdir. * Makefile.in: Add some .PHONY targets. * make-dist: Handle lwlib subdir like oldXMenu subdir. * lwlib: New subdirectory. Mon Jan 17 17:17:14 1994 Richard Stallman (rms@mole.gnu.ai.mit.edu) * configure.in: If CPP has a value that is a directory, discard the value. Sun Jan 16 04:58:47 1994 Roland McGrath (roland@churchy.gnu.ai.mit.edu) * configure.in (srcdir_undefs): Add g flag to sed substitution to remove -U[0-9]*. Sat Jan 15 10:14:44 1994 Richard Stallman (rms@mole.gnu.ai.mit.edu) * Makefile.in (do-install): Install the dired-x info files. * configure.in: Provide for variable LD_SWITCH_X_SITE_AUX. (See src/s/sol2.h.) Wed Jan 12 23:43:08 1994 Richard Stallman (rms@mole.gnu.ai.mit.edu) * configure.in (m68k-harris-cxux*, m88k-harris-cxux*): New configs. Sat Jan 8 16:37:36 1994 Roland McGrath (roland@churchy.gnu.ai.mit.edu) * configure.in (creating src/Makefile): Put code inside 2nd arg to AC_OUTPUT as it should be; hopefully noone will again see fit to gratuitously break this and not make a change log entry. Optimized sed processing of Makefile.in and cpp output; now preserves comments previously removed from the cpp input. Eliminated temp file for cpp output. Generate -U switches to undefine all identifiers that appear in the directory name ${srcdir}; pass these to cpp. * configure.in (version): Fix sed regexp to match two-elt version number. * configure.in: Check for strerror. Fri Jan 7 00:55:28 1994 Richard Stallman (rms@mole.gnu.ai.mit.edu) * configure.in: Test for bcmp. Thu Jan 6 07:36:28 1994 Richard Stallman (rms@mole.gnu.ai.mit.edu) * make-dist (tempdir): Put subdir msdos into the distribution. Fri Jan 7 22:20:15 1993 Morten Welinder (terra@diku.dk) * config.bat: New file. Sun Jan 2 13:54:12 1994 Richard Stallman (rms@mole.gnu.ai.mit.edu) * Makefile.in (${SUBDIR} target): Pass down LDFLAGS and CPPFLAGS. Sat Jan 1 12:11:53 1994 Richard Stallman (rms@mole.gnu.ai.mit.edu) * configure.in (m68*-next-*): Don't care about which os is specified. (i[34]86-*-*): Check for *-nextstop*. Fri Dec 24 20:43:03 1993 Richard Stallman (rms@mole.gnu.ai.mit.edu) * configure.in: Check for setsid. Fri Dec 17 13:11:44 1993 Richard Stallman (rms@srarc2) * configure.in (*-sun-solaris*): Add special case for Solaris 2.3. Wed Dec 15 14:03:05 1993 Richard Stallman (rms@srarc2) * Makefile.in (mkdir): Make only the lockdir writable. * configure.in (i860-*-sysv4): Renamed from i860-*-sysvr4. Sat Dec 11 15:56:10 1993 Richard Stallman (rms@srarc2) * Makefile.in (libdir): Use @libdir@. Wed Dec 8 22:30:27 1993 Richard Stallman (rms@srarc2) * Makefile.in (install): Add empty command. Sat Dec 4 14:15:50 1993 Richard Stallman (rms@srarc2) * make-dist: Put man/getopt.c in the dist. * configure.in (LIBS): Add test for existence of XSetWMProtocols. * Makefile.in (install): Depend on ${SUBDIR}, not `all'. Fri Dec 3 16:41:58 1993 Richard Stallman (rms@srarc2) * configure.in (solaris): Set NON_GNU_CPP instead of CPP. Set it for all solaris versions. (mips-mips-riscos4*): Set NON_GNU_CC, not CC. (after checking for GCC): If not GCC, and NON_GNU_CPP is set, set CPP. Likewise for NON_GNU_CC and CC. Wed Dec 1 22:59:18 1993 Richard Stallman (rms@srarc2) * configure.in (mips-mips-riscos4*): Assign variable CC. (checking ${with_gcc}): If "no", don't override CC if already set. (CC): Initialize it as empty. Tue Nov 30 14:54:34 1993 Richard Stallman (rms at srarc2) * configure.in (Suns): Set CPP if *-solaris2.3*. Sat Nov 27 04:14:28 1993 Richard Stallman (rms@mole.gnu.ai.mit.edu) * Version 19.22 released. * Makefile.in (do-install): Use umask 022 in copying etc and lisp dirs. Thu Nov 25 16:46:48 1993 Richard Stallman (rms@mole.gnu.ai.mit.edu) * make-dist: When breaking links, use cp -p. Copy install.sh into distribution. Move the temp dir up into the parent dir; don't leave the staging dir make-dist.tmp... in existence. * install.sh: New file. Sun Nov 21 04:01:46 1993 Richard Stallman (rms@mole.gnu.ai.mit.edu) * configure.in (i[34]86-ncr-sysv*): New specific alternative. Sat Nov 20 01:03:10 1993 Richard Stallman (rms@mole.gnu.ai.mit.edu) * configure.in (version): When --run-in-place, exclude ${datadir}/emacs/site-lisp from locallisppath. Thu Nov 18 00:56:48 1993 Richard Stallman (rms@mole.gnu.ai.mit.edu) * configure.in: Delete jumk.c before writing it. Tue Nov 16 00:56:51 1993 Richard Stallman (rms@mole.gnu.ai.mit.edu) * Version 19.21 released. * Makefile.in (mkdir): Ignore error from chmod. Mon Nov 15 05:11:55 1993 Richard Stallman (rms@mole.gnu.ai.mit.edu) * make-dist: Don't put lisp/forms.README in the distribution. Sat Nov 13 04:37:15 1993 Richard Stallman (rms@mole.gnu.ai.mit.edu) * configure.in (creating src/Makefile): Before running cpp, discard all lines that start with `# Generated' or /**/#. Thu Nov 11 09:52:37 1993 Richard Stallman (rms@mole.gnu.ai.mit.edu) * Version 19.20 released. * make-dist: Use build-ins.in, not build-install.in. Don't bother updating TAGS since it's not included. * build-ins.in: Renamed from build-install.in. Wed Nov 10 16:02:03 1993 Richard Stallman (rms@mole.gnu.ai.mit.edu) * make-dist: Don't try to link *.texinfo--there are none now. When running make in lib-src, specify YACC var value. Sun Oct 3 15:55:17 1993 Roland McGrath (roland@churchy.gnu.ai.mit.edu) * configure.in (extrasub): Add vpath patterns for %.[yls]. * configure.in: Don't do seddery on config.status after AC_OUTPUT. Instead just include the commands to make src/Makefile as the second arg to AC_OUTPUT. * configure.in: Use : instead of dnl for comment inside $makefile_command. * configure.in: No longer use vpath_sed. Instead, when we notice srcdir already configured, set extrasub to hack vpath in the makefiles. * configure.in: In cmds to make src/Makefile, chmod Makefile.new before moving it. * Makefile.in (VPATH): Define to @srcdir@. Tue Sep 28 03:25:46 1993 Brian Fox (bfox@cubit) * configure.in: Don't copy ${srcdir}/src/Makefile.in; that file doesn't exist. Just copy src/Makefile.in instead. Touch all of the Makefiles after editing config.status. * INSTALL: Update documentation to match new configuration mechanism. Mon Sep 27 08:51:38 1993 Brian Fox (bfox@ai.mit.edu) * configure.in: Allow any of the path or directory Makefile variables to be set with flags to configure. Create all Makefiles at configure time. Edit special commands into config.status after src/Makefile.in is built from src/Makefile. * Makefile.in (src/Makefile, lib-src/Makefile, oldXMenu/Makefile): If these files are out of date, simply have config.status rebuild them; don't rebuild them explicitly. Sat Sep 25 12:00:38 1993 Brian Fox (bfox@ai.mit.edu) * build-install.in: Change src/xemacs to src/emacs. We no longer create src/xemacs, so the file wouldn't be found. * make-dist: Remove `src/ymakefile', add `src/Makefile.in.in'. Fri Sep 24 03:07:35 1993 Brian Fox (bfox@albert.gnu.ai.mit.edu) * configure.in: Avoid forcing the search of /usr/include before fixed include files by resetting C_SWITCH_X_SITE if it is "-I/usr/include". Mon Sep 20 09:47:59 1993 Richard Stallman (rms@mole.gnu.ai.mit.edu) * Makefile.in (@rip_paths@locallisppath): Delete ${datadir}/emacs/site-lisp. Sun Sep 15 19:54:04 1993 Roland McGrath (roland@churchy.gnu.ai.mit.edu) * configure.in: Use AC_QUOTE_SQUOTE twice to properly quote vpath_sed value. Remove ${extra_output} from AC_OUTPUT call. Fri Sep 17 13:22:22 1993 Brian Fox (bfox@inferno) * make-dist: Quote backquotes found in strings to be echoed. * configure.in: Use "sh -c pwd" when we want to avoid having the shell fix up the value of $PWD. Mon Sep 13 21:06:16 1993 Brian Fox (bfox@inferno) * Makefile.in (do-install): Don't abort if ln or chmod at the end of the installation fail. Suggested by Karl Berry. Mon Aug 30 07:41:04 1993 Brian Fox (bfox@inferno) * Makefile.in (*clean): Use "$(MAKE) $(MAKEFLAGS)" wherever "make" was used. Set MAKEFLAGS from MFLAGS. Thu Sep 16 16:08:11 1993 Richard Stallman (rms@mole.gnu.ai.mit.edu) * configure.in: Test for res_init in libc. Mon Sep 13 11:56:01 1993 Richard Stallman (rms@mole.gnu.ai.mit.edu) * configure.in: In the file ${tempcname}, use configure___ instead of @configure@. Sun Sep 12 10:51:49 1993 Roland McGrath (roland@sugar-bombs.gnu.ai.mit.edu) * make-dist: Dist vpath.sed * Makefile.in (lib-src/Makefile, src/Makefile, oldXMenu/Makefile): Depend on vpath.sed. Replace sed comand for VPATH with @vpath_sed@. * configure.in: Substitute variable `vpath_sed'. If not in $srcdir and $srcdir is configured, issue warning that GNU make is required, and set vpath_sed to use vpath.sed script. Fri Sep 10 01:18:13 1993 Roland McGrath (roland@churchy.gnu.ai.mit.edu) * configure.in: Remove check for $srcdir being configured. This pretty much works now. Grok {m68*-hp,i[34]86-*}-netbsd* and set opsys=netbsd. Check for XFree86 (/usr/X386/include) independent of whether -lXbsd exists. * Makefile.in (info, dvi, clean, mostlyclean, distclean, realclean, unlock, relock): Use `$(MAKE)' in place of plain `make'. Sat Aug 14 01:31:37 1993 Richard Stallman (rms@mole.gnu.ai.mit.edu) * Version 19.19 released. * configure.in (i386-*-sunos4): Assume Sunos 4.0. Fri Aug 13 18:17:24 1993 Richard Stallman (rms@mole.gnu.ai.mit.edu) * configure.in: Check for XScreenNumberOfScreen. Thu Aug 12 01:01:44 1993 Richard Stallman (rms@mole.gnu.ai.mit.edu) * configure.in: Add * to end of all configuration alternatives. (m68*-sony-newsos3*): New alternative. Wed Aug 11 00:12:45 1993 Richard Stallman (rms@mole.gnu.ai.mit.edu) * make-dist: Include getdate.c in distribution. * configure.in: For --help, use $PAGER if it is set. (LIB_X11_LIB): Default to -lX11. (mips-sgi-irix5.*): New alternative. * Makefile.in (do-install): Install info/gnus* and info/sc*. * configure.in (m68*-hp-hpux*, hppa*-hp-hpux*): Recognize *.B8.* as hpux version 8. (m68*-tektronix-bsd*): Fix typo in tek4300. (AC_HAVE_FUNCS): Add ftime. Tue Aug 10 17:30:07 1993 Richard Stallman (rms@mole.gnu.ai.mit.edu) * configure.in (m88k-tektronix-sysv3*): Added the missing *. Use tekxd88, not tekXD88. Tue Aug 10 14:16:57 1993 Roland McGrath (roland@churchy.gnu.ai.mit.edu) * configure.in: Check for -lm. Then can check for frexp and logb. Sun Aug 8 13:42:49 1993 Richard Stallman (rms@mole.gnu.ai.mit.edu) * Version 19.18 released. * make-dist (src): Don't put gnu-hp300 in dist. (src, lisp): Include OChangeLog in dist. Sun Aug 8 01:52:55 1993 Jim Blandy (jimb@geech.gnu.ai.mit.edu) * configure.in: Test for presence of logb and frexp functions. Thu Aug 5 17:10:03 1993 Richard Stallman (rms@mole.gnu.ai.mit.edu) * configure.in (machine): Add i370-ibm-aix*. Tue Aug 3 02:55:17 1993 Jim Blandy (jimb@geech.gnu.ai.mit.edu) * configure.in (function checks): Test for mkdir and rmdir. * configure.in (function checks): Don't test for random and bcopy only when we're building with X; look for them all the time. Fri Jul 30 21:07:00 1993 Jim Blandy (jimb@geech.gnu.ai.mit.edu) * configure.in: Test for availability of bcopy functions, searching the X libraries if we're using X. * configure.in: Test for the presence of/usr/lpp/X11/bin/smt.exp, and #define HAVE_AIX_SMT_EXP if we do. This is present in some versions of AIX, and needs to be passed to the loader. * configure.in: Test for the availablility of the XScreenResourceString function. Fri Jul 30 20:54:58 1993 David J. MacKenzie (djm@frob.eng.umd.edu) * configure.in: If we found X on our own, set C_SWITCH_X_SITE and LD_SWITCH_X_SITE and assume --with-x11. Only look for X11 files if we weren't told about a window system or if we were told to use X11 but not told where. Search the libraries from the s and/or m files when checking for functions. * configure.in: Remove any trailing slashes in prefix and exec_prefix. Tue Jul 27 19:43:41 1993 Jim Blandy (jimb@geech.gnu.ai.mit.edu) * make-dist: Include lisp/dired.todo in the distribution. Fri Jul 23 15:51:24 1993 Richard Stallman (rms@mole.gnu.ai.mit.edu) * configure.in: Add code to set HAVE_INET_SOCKETS. Wed Jul 21 18:05:58 1993 Richard Stallman (rms@mole.gnu.ai.mit.edu) * configure.in: If we do find x_includes and x_libraries via AC_FIND_X, set C_SWITCH_X_SITE and LD_SWITCH_X_SITE. Mon Jul 19 15:19:23 1993 Richard Stallman (rms@mole.gnu.ai.mit.edu) * make-dist: Include src/gnu-hp300 in the dist. * configure.in (canonical): New variable holds the canonicalized configuration. Don't alter `configuration'. Use `configuration' for Makefile.in for file naming. (testing x_includes and x_libraries): Use =, not ==. Sat Jul 17 19:53:06 1993 Jim Blandy (jimb@totoro.cs.oberlin.edu) * Version 19.17 released. * Makefile.in (src/Makefile): Propagate C_SWITCH_SYSTEM to the src directory's makefile. This allows the invocation of CPP which builds xmakefile to receive these switches. The SunSoft C preprocessor inserts spaces between tokens if it doesn't get the -Xs flag requested in src/s/sol2.h. Mon Jul 12 14:43:38 1993 Frederic Pierresteguy (F.Pierresteguy@frcl.bull.fr) * configure.in (m68k-bull-sysv3): new config. Sat Jul 10 01:17:31 1993 Jim Blandy (jimb@geech.gnu.ai.mit.edu) * configure.in: Use the autoconf AC_FIND_X macro to try to find the X Windows libraries. Wed Jul 7 05:57:15 1993 Jim Blandy (jimb@geech.gnu.ai.mit.edu) * make-dist (tempdir): Don't create lisp/forms-mode directory in the distribution. Those files aren't kept in their own subdirectory any more. Tue Jul 6 11:05:14 1993 Jim Blandy (jimb@geech.gnu.ai.mit.edu) * Version 19.16 released. Wed Jun 23 21:52:34 1993 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu) * configure.in: Add --verbose flag. Sat Jun 19 17:14:27 1993 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu) * version 19.15 released. Fri Jun 18 11:59:35 1993 Jim Blandy (jimb@geech.gnu.ai.mit.edu) * Makefile.in (top_distclean): Use -f switch when cleaning out lock dir; it might be empty. * configure.in: Only check for -lXbsd once. Thu Jun 17 19:29:56 1993 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu) * Version 19.14 released. Thu Jun 17 00:53:41 1993 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu) * make-dist: If using gzip, create distribution with '.gz' extension. * make-dist (lisp/term): This doesn't have a ChangeLog anymore. (lisp/forms-mode): This doesn't exist anymore. * configure.in: Look for the closedir function. Wed Jun 16 16:48:35 1993 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu) * configure.in (CPP): Autoconf sets this to a shell variable reference, which doesn't work when it's edited into a makefile. Expand that variable reference. * Makefile.in (CPP): New variable. (src/Makefile): Edit CPP into src/Makefile. * Makefile.in (src/Makefile): Don't bother exiting single quotes and entering double quotes to get the values of LD_SWITCH_X_SITE and the other make variables; make substitutes them in anyway. * Makefile.in (uninstall): Don't remove the lisp and etc directories if they're in the source tree. Bring mumbleclean targets into conformance with GNU coding standards. * Makefile.in (mostlyclean, clean): Separate these two; just have them pass the request to the subdirectory makefiles. (distclean): Pass the request down, and then get rid of the files configure built, and get rid of the Makefiles. (realclean): Pass the request down, and then do the same things distclean does. (uninstall, info, dvi): New targets. * configure.in: Move clause for PC-compatible i386 box to the end of the case statement, to avoid masking configurations below. * configure.in: Add case for m88k-motorola-sysv4. * configure.in: Add support for HP/UX versions 7, 8, and 9 on the HP 68000 machines. * configure.in: Put the arguments to LD_SWITCH_X_SITE's and C_SWITCH_X_SITE's -L and -I switches in quotes, so the preprocessor won't fiddle with them. Sun Jun 13 04:23:31 1993 Richard Stallman (rms@mole.gnu.ai.mit.edu) * Makefile.in (TAGS): cd to src to run etags. Sat Jun 12 05:54:23 1993 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu) * configure.in (version): Check the X libraries for XrmSetDatabase and random, and see if we have -lXbsd. Fri Jun 11 02:35:54 1993 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu) * configure.in: Pass "-Isrc" to the CPP we run to examine the s/*.h and m/*.h files. Martin Tomes says ISC Unix 3.0.1 needs it. Thu Jun 10 19:03:24 1993 Richard Stallman (rms@mole.gnu.ai.mit.edu) * configure.in: Move i386-prime-sysv* and i386-sequent-bsd* above the general i386 alternative. Thu Jun 10 01:45:45 1993 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu) * configure.in: Recognize configuration name for Data General AViiON machines. * configure.in: Use AC_LONG_FILE_NAMES. Wed Jun 9 00:05:06 1993 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu) * configure.in: Test for bison. * Makefile.in (YACC): New variable. (lib-src/Makefile.in): Edit YACC into the makefile. Tue Jun 8 02:42:18 1993 Jim Blandy (jimb@totoro.cs.oberlin.edu) * Version 19.13 released. * configure.in (CFLAGS): Don't set this according to the value of the GCC shell variable. Instead, consult the machine and system files for the values of C_OPTIMIZE_SWITCH and C_DEBUG_SWITCH, and test __GNUC__ while we're at it. * configure.in: Remove extra ;; from hpux cases. Mon Jun 7 23:55:41 1993 Jim Blandy (jimb@totoro.cs.oberlin.edu) * configure.in: Check to see if the system has -ldnet. Tue Jun 8 00:22:46 1993 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu) * make-dist: Add clauses to distribute lisp/forms-mode. Mon Jun 7 13:53:54 1993 Richard Stallman (rms@mole.gnu.ai.mit.edu) * configure.in (machine): Fix the versions in hpux version number test. Do not guess based on cpu type. Do check for explicit system version. Thu Jun 3 16:42:57 1993 Richard Stallman (rms@mole.gnu.ai.mit.edu) * configure.in: Do NOT look for `unknown' as company name. Wed Jun 2 12:10:09 1993 Richard Stallman (rms@mole.gnu.ai.mit.edu) * configure.in: Fix typo in message. Tue Jun 1 00:08:05 1993 Richard Stallman (rms@mole.gnu.ai.mit.edu) * Version 19.12 released. * Makefile.in (do-install): Correct previous etc-copying change. Partially rewrite using `if'. (src/Makefile): Insert --x-libraries option into LD_SWITCH_X_SITE. * Version 19.11 released. * configure.in: Handle 386bsd. Mon May 31 00:23:47 1993 Richard Stallman (rms@mole.gnu.ai.mit.edu) * make-dist: Update getdate.c. * configure.in: Handle bsd386. * Makefile.in (do-install): Use `-' in tar options. * configure.in: Change ! "${...}" to x"${...}" = x. * Makefile.in (do-install): Copy the DOC-* files from the build etc directory, as well as lots of things from ${srcdir}/etc. * make-dist: Copy config.guess. * configure.in: Handle AIX versions 1.2, 1.3. Sun May 30 15:37:57 1993 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu) * configure.in: Use s/bsd4-3.h for mips-mips-riscos4, and add the configuration name mips-mips-usg* to represent USG systems. * configure.in: Fix logic to detect if srcdir is already configured. * Makefile.in: Pass in LD_SWITCH_X_SITE. * Makefile.in (mkdir, clean, mostlyclean, do-install): Use `(cd foo && pwd)` instead of `(cd foo ; pwd)` to get the canonical name of a directory; cd might fail, and have pwd print out the current directory. Sun May 30 14:55:24 1993 Richard Stallman (rms@mole.gnu.ai.mit.edu) * configure.in: When looking for sources, use '.', not `.`. Also '..'. Sun May 30 14:23:50 1993 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu) * configure.in: Complain if srcdir points at an already-configured tree. Sun May 30 00:15:27 1993 Richard Stallman (rms@mole.gnu.ai.mit.edu) * Version 19.10 released. Sat May 29 16:52:24 1993 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu) * Makefile.in: Use Makefile comments, not C comments. * configure.in: Add case for the Tektronix XD88. Sat May 29 16:30:13 1993 Richard Stallman (rms@mole.gnu.ai.mit.edu) * configure.in: Handle sysv4.2 and sysvr4.2. Sat May 29 15:30:00 1993 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu) * configure.in: Traverse the argument list without destroying it; don't use shift. It turns out that "set - ${saved_arguments}" doesn't work portably. * configure.in: Add missing "fi". * make-dist: Rebuild configure if configure.in is newer. * Makefile.in (src:, lib-src:, FRC:): force the src and lib-src targets to be executed even if make remembers that it has already stisfied FRC. Sat May 29 02:09:15 1993 Richard Stallman (rms@mole.gnu.ai.mit.edu) * Makefile.in (do-install): Delete redundant code to copy etc twice. * configure.in (romp): Handle various version numbers with aos and bsd. Fri May 28 17:02:59 1993 Richard Stallman (rms@mole.gnu.ai.mit.edu) * configure.in: Fix message text. Fri May 28 00:31:48 1993 Jim Blandy (jimb@geech.gnu.ai.mit.edu) * make-dist: Make a `site-lisp' directory in the distribution, instead of a `local-lisp' directory, which hasn't been the appropriate name for a long time. * Makefile.in (@rip_paths@locallisppath): Use site-lisp directory from the distribution first, then /usr/local/lib/emacs/site-lisp. * Makefile.in (do-install): Correctly detect if ./etc and ${srcdir}/etc are the same. * configure.in: Extract UNEXEC from the system configuration files, compute the name of the source file corresponding to the object file, and #define it as UNEXEC_SRC in config.h. * configure.in: If srcdir is '.', then try using PWD to make it absolute. * configure.in: Include ${srcdir} in the printed report, to help people notice if it's an automounter path. Thu May 27 23:23:58 1993 Jim Blandy (jimb@geech.gnu.ai.mit.edu) * configure.in (prefix): Don't run pwd on srcdir unnecessarily. Thu May 27 18:01:54 1993 Richard Stallman (rms@mole.gnu.ai.mit.edu) * Makefile.in (do-install): Delete the dest dir, not the source dir, when they are different. Add `shift' command. (COPYDESTS, COPYDIR): Delete external-lisp dir. (externallispdir): Var deleted. * configure.in: Delete spurious paren outputting short_usage. Thu May 27 02:35:32 1993 Jim Blandy (jimb@geech.gnu.ai.mit.edu) * Version 19.9 released. Wed May 26 14:23:27 1993 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu) * Makefile.in (${SUBDIR}): Pass the value of the make variable to subdirectory makes. * make-dist: Check for .elc files with no corresponding .el file. * Makefile.in (mkdir): Make all the directories in locallisppath. * config.guess: New file. * configure.in: Use it, tentatively. * INSTNALL: Mention its usage. * configure.in (hppa-hp-hpux): Use uname -r instead of uname -m; the former gives you the operating system rev directly. Use s/hpux.h if we don't recognize what we got. * Makefile.in (do-install): Don't remove a destination directory if it's the same as the source. If ${srcdir}/info == ${infodir}, don't try to copy the info files. * Makefile.in (COPYDIR, COPYDESTS): Don't mention etc twice; this doesn't work if you're not using a separate source directory. (do-install): Copy the build tree's etc directory only after making sure it's not also the source tree's etc directory. Wed May 26 13:43:01 1993 Richard Stallman (rms@mole.gnu.ai.mit.edu) * configure.in: Handle sunos4.1.3 specially. Tue May 25 12:47:10 1993 Richard Stallman (rms@mole.gnu.ai.mit.edu) * Makefile.in (INSTALL): Add definition. * configure.in: Fix some messages. Support -with-gnu-cc. At the end, use `set --', not `set -'. Delete spurious `.h' in hpux alternatives. Tue May 25 05:15:14 1993 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu) * Version 19.8 released. Tue May 25 00:55:45 1993 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu) * configure.in: When looking for source in the same directory as the configure script, make the path thus discovered absolute. If the user specifies the `--srcdir' switch, make that directory absolute too. * Makefile.in (srcdir): Remove comment saying this doesn't work. * Makefile.in (src/paths.h): Edit the `infodir' variable into this too, as the value of the PATH_INFO macro. * configure.in: Check to see if the source lives in the same directory as the configure script. Mon May 24 12:14:41 1993 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu) * Makefile.in (install): Split this into `install' and `do-install', to give people more control over exactly what gets done. (do-install): New target, containing the guts of `install'. Don't remove and recreate the directories inside the copying loop - do it all before the copying loop. Pass more flags to the lib-src make. (mkdir): Create ${infodir}, ${mandir}, and ${sitelispdir} here, to avoid errors and warnings. * configure.in: For generic IBM PC boxes, insist on "unknown" for the manufacturer - the more general case was blocking other i386 configuration names below, and that's how the names are written in MACHINES anyway. * make-dist: When breaking links, remove the link before moving the copy onto it, to avoid interactive behavior. * Makefile.in: Doc fix. * configure.in: Doc fix. * INSTALL: Mention --exec-prefix option. * configure.in: Add support for the `--exec-prefix' option. * Makefile.in: Accept that support. * configure.in: Use the AC_PROG_INSTALL macro. * Makefile.in (INSTALL): Variable removed. (INSTALL_PROGRAM, INSTALL_DATA): Accept these values from configure. * configure.in: Distinguish between hp800's and hp700's by calling "uname -m". Mon May 24 00:12:26 1993 Richard Stallman (rms@mole.gnu.ai.mit.edu) * configure.in: Recognize configuration names for i860 boxes running SYSV. Sun May 23 00:37:44 1993 Jim Blandy (jimb@geech.gnu.ai.mit.edu) * configure.in: Distinguish between hp800's and hp700's by the version of HP/UX they run, since that's something people are more likely to know - hp700's run 8.0. Add HP 700 configuration. * configure.in: Test for the presence of the `rename' function. * Makefile.in (C_SWITCH_X_SITE): New variable - get this from configure.in. (oldXMenu/Makefile): Edit C_SWITCH_X_SITE into this. * make-dist: Break intra-tree links. * configure.in: Explain that this is an autoconf script, and give instructions for rebuilding configure from it. Arrange to put comments in configure explaining this too. * configure.in: Make the first line of the configure script be "#!/bin/sh". Leaving the first line blank didn't work. * configure.in (long_usage): Removed; made short_usage describe the options briefly. * configure.in: Implement the --prefix option. * Makefile.in (prefix): Add support for it here. * INSTALL: Document it here. * Makefile.in (install): Don't assume that the files in the `info' subdirectory match *.info. They don't have that prefix. Sat May 22 22:53:24 1993 Jim Blandy (jimb@geech.gnu.ai.mit.edu) * configure.in: Add case for version 5 of Esix. Sat May 22 17:24:06 1993 Jim Blandy (jimb@geech.gnu.ai.mit.edu) * Version 19.7 released. * make-dist: There aren't any *.com files in lib-src anymore. * make-dist: Copy texinfo.tex and texindex.c, rather than linking them; they're symlinks to other filesystems on the GNU machines. * make-dist: Check that the manual reflects the same version of Emacs as stated in lisp/version.el. Edit that version number into the README file. Fri May 21 17:32:41 1993 Jim Blandy (jimb@geech.gnu.ai.mit.edu) * configure.in: Remove the hack of AC_DEFINE; use AC_DEFINE_UNQUOTED. Thu May 20 01:24:24 1993 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu) * make-dist: Don't distribute precomp.com, compile.com, or link.com from ./src; they're in ./vms now. Some time-handling patches from Paul Eggert: * configure.in: Add AC_TIMEZONE. Wed May 19 20:56:26 1993 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu) * configure.in: Recognize Linux as a valid operating system for the i386. Tue May 18 16:31:50 1993 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu) * make-dist: Distribute some VMS files we got from Richard Levitte. * Makefile.in (oldXMenu/Makefile): Take oldXMenu/Makefile.in as the source for the sed command, not oldXMenu/Makefile. Mon May 17 19:33:55 1993 Jim Blandy (jimb@totoro.cs.oberlin.edu) * INSTALL: Don't claim the srcdir option doesn't work. Sun May 16 18:41:27 1993 Jim Blandy (jimb@totoro.cs.oberlin.edu) * configure.in: Include remarks saying what order the autoconf tests should go in, and remind people to change config.h.in whenever they add autoconf tests which make #definitions. * make-dist: Distribute oldXMenu/Makefile.in, not oldXMenu/Makefile. Sat May 15 16:47:50 1993 Jim Blandy (jimb@geech.gnu.ai.mit.edu) * Makefile.in (oldXMenu/Makefile): Make this depend on ${srcdir}/oldXMenu/Makefile.in, not itself. * PROBLEMS: Some updates from David J. Mackenzie. More changes from David J. Mackenzie. * Makefile.in (install.sysv, install.xenix, install.aix): Targets removed; autoconf and config.h should specify all these differences. (buildlisppath): Make this path depend on ${srcdir}. (INSTALLFLAGS): Removed. (INSTALL): Include the -c flag. (install): Change the way we invoke install accordingly. Install ${srcdir} changes from DJM. * Makefile.in (SUBDIR_MAKEFILES): Add oldXMenu/Makefile to this list. (COPYDIR, COPYDESTS): Install files from both the etc directory in the source tree and the etc directory in the object tree. (${SUBDIR}): Pass the prefix variable down to submakes. (everywhere): Use `sed', not `/bin/sed'. Not all systems have sed in /bin. (lib-src/Makefile, src/Makefile, oldXMenu/Makefile): Edit in values for srcdir and VPATH. (install): Add `v' flag to tar command. Make sure that `dir' exists in ${srcdir}/info before copying it. Remember that the man pages come from the source tree, not the object tree. * configure.in: Remove remarks saying that the --srcdir option doesn't work. Create the etc directory in the object tree. Recognize configuration names of the form *-sun-solaris*. Recognize sunos5 and solaris as operating system names. * configure.in: Use the AC_TIME_WITH_SYS_TIME macro, for lib-src/getdate.y and src/systime.h. Sat May 15 00:12:26 1993 Richard Stallman (rms@mole.gnu.ai.mit.edu) * make-dist: Make links in info subdir. Thu May 13 15:28:19 1993 Jim Blandy (jimb@totoro.cs.oberlin.edu) * configure.in: Call AC_STDC_HEADERS. Mon May 10 15:19:03 1993 Jim Blandy (jimb@geech.gnu.ai.mit.edu) * configure.in: Sidestep autoconf's quoting of the second argument of AC_DEFINE, so we can specify the value to put there. It would be nice if autoconf provided some way to specify computed values for macros. Sun May 9 17:30:48 1993 Jim Blandy (jimb@totoro.cs.oberlin.edu) * Makefile.in (DEFS): Deleted; since we're using AC_CONFIG_HEADER, this is always just -DHAVE_CONFIG_H. The GNU coding standards specify that CFLAGS should be left for users to set. * Makefile.in (CFLAGS): Let configure determine the default value for this. Don't have it default to DEFS. (${SUBDIR}): Pass CFLAGS down to submakes, not DEFS. (lib-src/Makefile, src/Makefile): Edit the default value for CFLAGS into these files, not DEFS. * configure.in (CFLAGS): Choose a default value for this - "-g" normally, or "-g -O" if we're using GCC. Edit it into the top-level Makefile. * configure.in: When scanning the machine and system description #include files, write their names to conftest.c properly. Fri May 7 00:57:13 1993 Jim Blandy (jimb@totoro.cs.oberlin.edu) * configure.in: In configuration name case for Apallos running Domainios, set opsys, not opsysfile. * configure.in: Use the autoconf AC_CONFIG_HEADER macro to produce src/config.h, instead of AC_OUTPUT; the latter overwrites src/config.h even when it hasn't changed, puts a makefile-style comment at the top even though it's C code, and produces a config.status script which doesn't do the job right. * configure.in: Add AC_LN_S test, so we can tell whether or not we can use a symbolic link to get the X Menu library into src. * Makefile.in (LN_S): New variable. (src/Makefile): Edit the value of LN_S into this makefile. Thu May 6 14:03:16 1993 Richard Stallman (rms@mole.gnu.ai.mit.edu) * configure.in: Support *-sco3.2v4* as opsystem. * make-dist: Don't include calc directory. Exclude many files in the man directory; copy a few. Tue May 4 10:15:32 1993 Jim Blandy (jimb@geech.gnu.ai.mit.edu) * configure.in: Use AC_HAVE_HEADERS to test for sys/time.h, and call AC_STRUCT_TM to see what's in time.h. * configure.in: Employ quoting stupidity to get the value of CPP to expand properly. Tue Apr 27 13:00:28 1993 Jim Blandy (jimb@totoro.cs.oberlin.edu) * configure.in: Use the AC_PROG_CPP macro, and then use the CPP variable to scan the machine and system description files. * configure.in: Use the AC_HAVE_HEADERS to check for sys/timeb.h, so that getdate.y builds correctly. Mon Apr 26 19:11:45 1993 Jim Blandy (jimb@totoro.cs.oberlin.edu) * configure.in (tempcname): Change this to "conftest.c", so it will work properly on systems with short filenames; this is the name autoconf uses. * configure.in: Also detect the availability of dup2 and gethostname. * configure.in: Use the AC_ALLOCA test. * Makefile.in (ALLOCA): New variable, to be set by ./configure. (lib-src/Makefile): Edit the value of ALLOCA into lib-src/Makefile. Sat Apr 24 23:41:48 1993 Jim Blandy (jimb@totoro.cs.oberlin.edu) * make-dist: Distribute configure, as well as configure.in. Oversight. Fri Apr 23 17:32:12 1993 Jim Blandy (jimb@totoro.cs.oberlin.edu) * Makefile.in (install): Print out the name of the directory we're copying, so people can have some idea of whether we're making progress. * Makefile.in (install.aix, install.xenix, install.sysv, install): Don't forget to re-create the COPYDESTS directories after we clear them out. Tue Apr 13 00:58:01 1993 Jim Blandy (jimb@totoro.cs.oberlin.edu) * Makefile.in: Add autoconf cookies so that the configure script can comment out sections of path variable definitions to choose between the installable configuration and the run-in-place configuration. * configure.in: Add new option `--run-in-place', to select the run-in-place path definitions. * configure.in: Add a clause to the big configuration name case for the NeXT machine. Mon Apr 12 22:20:30 1993 Jim Blandy (jimb@totoro.cs.oberlin.edu) * Makefile.in (install, install.sysv, install.xenix, install.aix): Make sure that each source directory exists, and is different from the destination directory; then, delete the destination before copying over the source. * make-dist: Distribute configure.in, instead of configure. Sat Apr 10 04:29:06 1993 Jim Blandy (jimb@geech.gnu.ai.mit.edu) * configure.in: Don't set CC to "gcc -O" if the user specifies `--with-gcc'. Add -O to DEFS if GCC is set. Fri Apr 9 07:20:40 1993 Jim Blandy (jimb@totoro.cs.oberlin.edu) * Makefile.in (clean mostlyclean): Missing right paren. * configure.in: When checking for X windows, search for an X11 subdirectory of ${x_includes}. * configure.in: Check for gettimeofday function, for getdate.y. Change `configure' to a mixture of custom code and autoconf stuff. autoconf can't derive all the information we need, but we'd really like to be able to take advantage of some of its tests, and its file-editing facilities. * configure.in: Renamed from configure. Quote the sections of shell script we want copied literally to the configure script. (compile): Initialize this to make the autoconf macros' code happy. Use AC_PROG_CC, AC_CONST, and AC_RETSIGTYPE instead of writing out code to do their jobs. Use autoconf to produce Makefile and src/config.h. Remove the Makefile-style comment that autoconf places at the top of src/config.h. (config_h_opts): Removed - no longer necessary. * Makefile.in (configname): Renamed to configuration. (CONFIG_CFLAGS): Renamed to DEFS. (CC, DEFS, C_SWITCH_SYSTEM, version, configuration): Adjusted to get values via autoload @cookies@. (libsrc_libs): Get this from autoconf. We used to do nothing about this. (${SUBDIR}): Pass DEFS to submakes instead of CONFIG_CFLAGS. * Makefile.in (src/paths.h, lib-src/Makefile, src/Makefile): Don't echo the move-if-change command. Thu Apr 8 05:29:14 1993 Jim Blandy (jimb@churchy.gnu.ai.mit.edu) * make-dist: Distribute lib-src/rcs-checkin. * make-dist: It's oldXMenu/compile.com, not oldXMenu/compile.mms. Don't try to make links to the RCS or Old subdirectories. Use the appropriate extension for the compression type in use. Create the tar file in the shell's initial default directory, not in ${tempparent}. Erase the whole ${tempparent} tree, not just ${tempdir}. Tue Mar 30 15:32:59 1993 Jim Blandy (jimb@geech.gnu.ai.mit.edu) * Makefile.in (src/paths.h): Don't echo the huge sed command we use to build paths.h. (lib-src/Makefile, src/Makefile): Similarly. * configure: Extend test for working `const' keyword to handle AIX 3.2 cc. Wed Mar 24 20:12:05 1993 Jim Blandy (jimb@geech.gnu.ai.mit.edu) * make-dist: Distribute lisp/term/ChangeLog. Arrange for C compilation throughout the tree to get C_SWITCH_SYSTEM from the configuration files. * configure: Extract C_SWITCH_SYSTEM from the machine and system-dependent files, and save it in the top-level Makefile. * Makefile.in (C_SWITCH_SYSTEM): New flag for configure to edit. (lib-src/Makefile): Edit C_SWITCH_SYSTEM into lib-src/Makefile. * make-dist: Include the VMS support files in oldXMenu in the distribution. * configure: Doc fix. * configure: Fix corrupted config_h_opts. * configure: Properly report option names in error messages. * configure: Properly recognize --x-includes and --x-libraries options. * configure: Fix syntax errors in code handling XFree386. Tue Mar 23 00:29:52 1993 Jim Blandy (jimb@geech.gnu.ai.mit.edu) * configure: Add special code to detect XFree386, and tell config.h about it. * configure: Properly handle extracting values of LIBS_MACHINE and LIBS_SYSTEM that contain spaces. * configure: Add `--x-includes' and `--x-libraries' options. I think these are dopey, but no less than three alpha testers, at large sites, have said they have their X files installed in odd places. Implement them by setting C_SWITCH_X_SITE and LD_SWITCH_X_SITE in src/config.h. Mon Mar 22 14:57:04 1993 Eric S. Raymond (eric@geech.gnu.ai.mit.edu) * make-dist: Don't distribute etc/Old files. * GETTING.GNU.SOFTWARE, PROBLEMS: Registered into RCS with their backups. Sat Mar 20 13:11:55 1993 Jim Blandy (jimb@geech.gnu.ai.mit.edu) * make-dist: Fix typo. Fri Mar 19 08:08:04 1993 Eric S. Raymond (eric@geech.gnu.ai.mit.edu) * make-dist: Corrected typo, fixed it to discard = and TAGS files in some cases where it should but didn't seen to. * Makefile.in: Added unlock and relock productions. Thu Mar 18 23:12:47 1993 Jim Blandy (jimb@geech.gnu.ai.mit.edu) * make-dist: Add a --compress option to force make-dist to use compress. * make-dist: Use gzip, if we can find it. * configure: Recognize rs6000-ibm-aix32 and rs6000-ibm-aix, and make rs6000-ibm-aix default to -aix32. Wed Mar 17 13:23:14 1993 Eric S. Raymond (eric@geech.gnu.ai.mit.edu) * Makefile.in: Added `Developer's configuration' section. Wed Mar 17 08:30:52 1993 Eric S. Raymond (eric@mole.gnu.ai.mit.edu) * Makefile.in: Add commented-out variable settings for developer's configuration. Sun Mar 14 20:16:21 1993 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu) * make-dist: Distribute `src/bitmaps' too. Sun Mar 14 17:16:53 1993 Charles Hannum (mycroft@hal.gnu.ai.mit.edu) * configure: Recognize rs6000-ibm-aix32 and rs6000-ibm-aix, and make rs6000-ibm-aix default to -aix32. Tue Mar 9 11:05:00 1993 Jim Blandy (jimb@totoro.cs.oberlin.edu) * configure: Recognize strings like "sysvr0" or "sysvr1" as System V. * Makefile.in (install.sysv): Add a second `$' in front of `${dest}', so that the shell will expand it, instead of Make. * configure: When processing the name of the configure script, collapse `././' to `./', but leave a single `./' prefix alone. * configure: Doc fix. Thu Mar 4 09:42:29 1993 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu) * configure: Handle isc3.0 correctly. Thu Feb 25 00:31:33 1993 Jim Blandy (jimb@totoro.cs.oberlin.edu) * make-dist: Don't try to copy the COPYING notice into external-lisp; we're not distributing that directory any more. Wed Feb 24 17:25:27 1993 Jim Blandy (jimb@totoro.cs.oberlin.edu) * Makefile.in (install, install.aix, install.xenix, install.sysv): Remove CVS subdirectories from the installed directory trees, as well as RCS directories. Tue Feb 23 06:54:11 1993 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu) * make-dist: Only copy gmalloc.c if we couldn't link it. Don't try to copy man/{README,Makefile} unless they actually exist. * Makefile.in (lisppath): Don't include externallispdir in this. We're not sure whether we're even going to distribute the directory yet. Wed Feb 17 20:19:06 1993 Jim Blandy (jimb@totoro.cs.oberlin.edu) * make-dist: Don't distribute the external-lisp directory anymore. * INSTALL: Remove all references to external-lisp. * configure: Detect whether the compiler supports `const' properly, and edit src/config.h accordingly. * configure: Tweak layout of final report. * Makefile.in (${SUBDIR}): Pass CONFIG_CFLAGS to the submakes, not CFLAGS. * Makefile.in (locallisppath): Make this default to ${datadir}/emacs/site-lisp, instead of ${datadir}/emacs/local-lisp. ${datadir} and ${statedir} are often the same thing, and local-lisp causes completion conflicts with lock. (lisppath): Add ${externallispdir} to this. * INSTALL: Adjust installation directions. * Makefile.in (externallispdir): New variable, to say where to install the externally-maintained lisp files. (COPYDIR, COPYDESTS): Copy the external lisp directory just like the others. * INSTALL: Describe external-lisp and the new externallispdir variable. Sun Feb 14 08:47:04 1993 Jim Blandy (jimb@totoro.cs.oberlin.edu) * configure (progname): New option `--with-gcc'. Make it clearer how we are trying to guess whether or not we have GCC. * INSTALL: Document the `--with-gcc' option, and improve description of `--with-x' options. Sat Feb 6 19:55:48 1993 Jim Blandy (jimb@totoro.cs.oberlin.edu) * Makefile.in (COPYDIR, COPYDESTS): Remove ${srcdir}/info and ${infodir} from these variables; we have written out explicit code to install the info files. Mon Jan 25 23:27:53 1993 Jim Blandy (jimb@geech.gnu.ai.mit.edu) * make-dist: Don't distributed the RCS files in the etc directory. Sun Jan 24 20:48:02 1993 Jim Blandy (jimb@totoro.cs.oberlin.edu) * Makefile.in: Some makes can't handle comments in the middle of commands; move them to before the whole rule. Sat Jan 16 00:37:46 1993 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu) * README: Mention what Emacs is. Thu Jan 14 12:27:38 1993 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu) * make-dist: Include `./lisp/calc-2.02' in the distribution. Add `./cpp' and `./man' back into the distribution. Wed Jan 13 17:20:01 1993 Richard Stallman (rms@mole.gnu.ai.mit.edu) * Makefile.in: Define MAKE, and use where appropriate. Thu Jan 7 04:37:46 1993 Jim Blandy (jimb@totoro.cs.oberlin.edu) * make-dist: Remember that the authoritative COPYING notice is `etc/COPYING', not `../etc/COPYING'. Sun Dec 20 23:59:43 1992 Jim Blandy (jimb@totoro.cs.oberlin.edu) * make-dist: Make sure that the COPYING notices in each directory are copies, not symlinks. Sat Dec 19 06:46:05 1992 Jim Blandy (jimb@totoro.cs.oberlin.edu) * INSTALL: The build process produces an executable called `emacs' now. Change references. * Makefile.in: Adjust `install.mumble' targets to install `src/emacs', not `src/xemacs'. * configure: Start with a blank line; this keeps some old CSH's from thinking it's a CSH script. Most systems will just use /bin/sh to run it, which is what we're expecting; the only other shells which might try to interpret it themselves are probably Bourne-compatible. Mon Dec 14 07:09:36 1992 Jim Blandy (jimb@totoro.cs.oberlin.edu) * INSTALL: Improvements suggested by David Mackenzie. Sat Dec 12 00:31:46 1992 Jim Blandy (jimb@totoro.cs.oberlin.edu) * Makefile.in (install, install.sysv, install.xenix, install.aix): Don't try to copy the info files if there aren't any; the unexpanded globbing pattern disappoints `install'. Ignore the return status of that command. * INSTALL: Updated for new configuration arrangement. * configure: Don't make the top-level Makefile read-only - people may want to edit the values of the path variables. * Makefile.in (install, install.sysv, install.xenix, install.aix): Install the info files in ${infodir}. Install the executable under both `emacs' and `emacs-VERSION'. * Makefile.in: Doc fix. * Makefile.in (exec_prefix): New variable, as per latest version of coding standards. (bindir, libdir): Use it, instead of `prefix'. (lib-src/Makefile): Edit value of exec_prefix into lib-src/Makefile. * Makefile.in (mandir): Make the default value for this depend on $(prefix). * Makefile.in (datadir, statedir, libdir): Make these all default to ${prefix}/lib. (lispdir, locallisppath, etcdir, lockdir, archlibdir): Adjusted to compensate. * Makefile.in (install, install.sysv, install.xenix, install.aix): Install the etags and ctags man pages too. * Makefile.in (distclean): Don't delete backup files; that's the job of extraclean. (extraclean): Like distclean, but deletes backup and autosave files. Thu Dec 10 21:10:40 1992 Jim Blandy (jimb@totoro.cs.oberlin.edu) Make path specification conform to GNU coding standards. * configure (long_usage): Remove all traces of old arguments from usage messages, and document the options we do accept in more detail: -with-x... and --srcdir. (options, boolean_opts): Deleted; we don't have enough options to make this worthwhile. (prefix, bindir, lisppath, datadir, libdir, lockdir): Deleted, along with the code which supported them; these should be set as arguments to the top-level make. (config_h_opts): Since this no longer doubles as a list of option names, make them upper case; this simplifies the code which uses them to build the sed command to edit src/config.h. Change the code which sets them. (cc, g, O): Don't allow the user to set these using options; they should be specified using `CC=' and `CFLAGS=' arguments to the top-level make. Just choose reasonable default values for them, and edit them into Makefile.in's default CC and CONFIG_CFLAGS values. (gnu_malloc, rel_alloc): Don't allow the user to set these using options; use them whenever the configuration files say they're possible. Simplify the argument processing loop. Don't accept abbreviations for option names; these might conflict with other configuration options in the future. Add some support for the `--srcdir' option. Check for the sources in . and .. if `--srcdir' is omitted. If the directories we will compile in don't exist yet, create them under the current directory. Note that the rest of the build process doesn't really support this. Edit only the top Makefile. That should edit the others. Edit into the makefile: `version', from lisp/version.el, `configname' and `srcdir' from the configuration arguments, `CC' and `CONFIG_CFLAGS' as guessed from the presence or absence of GCC in the user's path, and LOADLIBES as gleaned from the system description files. Simplify the report generated; it doesn't need to include any description of paths now. Make `config.status' exec configure instead of just calling it, so there's no harm in overwriting `config.status'. * Makefile.in (version, configname): New variables, used to choose the default values for datadir and libdir. Path variables rearranged into two clearer groups: - In the first group are the variables specified by the GNU coding standards (prefix, bindir, datadir, statedir, libdir, mandir, manext, infodir, and srcdir). - In the second are the variables actually used for Emacs's paths (lispdir, locallisppath, lisppath, buildlisppath, etcdir, lockdir, archlibdir), which depend on the first category. datadir and libdir default to directories under ${prefix}/lib/emacs instead of ${prefix}/emacs, by popular demand. etcdir and lispdir default to subdirectories of datadir. archlibdir defaults to libdir. The new installation tree is a bit deeper than it used to be, so use the new make-path program in lib-src to build them all. Always build a new src/paths.h.tmp and then move-if-change it to src/paths.h, to avoid unnecessary rebuilds while responding to the right changes. Remove all mention of arch-lib. Run utility commands from lib-src, and let the executables be copied into archlibdir when Emacs is installed. Add targets for src/Makefile, lib-src/Makefile, and oldXMenu/Makefile, editing the values of the path variables into them. Let lib-src do its own installation. (datadir): Default to putting data files under ${prefix}/lib/emacs/${version}, not /usr/local/emacs. (emacsdir): Variable deleted; it would only be confusing to use. (lispdir, etcdir): Default to ${datadir}/lisp. (mkdir): Use make-path for this. (lockdir): Do this in mkdir. (Makefile): New target. * configure (usage_message): Rename to long_usage. * make-dist: Don't bother creating an arch-lib directory; that's only for installation now. Fri Nov 20 06:15:14 1992 Jim Blandy (jimb@totoro.cs.oberlin.edu) * configure: Use GCC-style configuration names, using config.sub. Change the usage and help messages. * configure: Initialize window_system, not indow_system. * configure: Report which window system, compiler, and signal handler return type we decide to use. * make-dist: Explain what's going on if config.sub and gmalloc.c can't be linked. Place the code which copies them near the code which links the rest of the files around them. Sun Nov 15 20:59:55 1992 Jim Blandy (jimb@apple-gunkies.gnu.ai.mit.edu) * make-dist: Don't bother to distribute src/*.com, or src/vmsbuild; those have all been moved to `../vms'. Sat Nov 7 15:11:39 1992 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu) * make-dist: Don't forget that the way to avoid filenames starting with `=' is to use the pattern `[a-zA-Z0-9]*.h', not `[a-zA-Z0-9].h'. Add a new section for dealing with files that we couldn't make hard links to, since we have two already, and perhaps more to come. Wed Nov 4 15:09:07 1992 Jim Blandy (jimb@totoro.cs.oberlin.edu) * configure: When editing parameters into lib-src/Makefile, change the definition of CONFIG_CFLAGS instead of CFLAGS itself; CFLAGS needs some other flags too. Tue Nov 3 05:42:55 1992 Jim Blandy (jimb@totoro.cs.oberlin.edu) * configure: Remove spurious echo of the configuration name. * make-dist: Don't distribute files in src/m and src/s whose names begin with `='. Tue Oct 27 04:06:30 1992 Richard Stallman (rms@mole.gnu.ai.mit.edu) * configure: Update GNU_MALLOC and REL_ALLOC in config.h. Also LISP_FLOAT_TYPE. Mon Oct 26 19:55:01 1992 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu) * make-dist: Copy config.sub, since it's a symbolic link to a file on another file system. Sat Oct 17 17:04:24 1992 Jim Blandy (jimb@totoro.cs.oberlin.edu) * make-dist: Include lib-src/makedoc.com and emacs.csh in the distribution. * config.sub: New file, to help us recognize configuration names. * make-dist: Include it in the distribution. Mon Sep 14 17:43:50 1992 Richard Stallman (rms@mole.gnu.ai.mit.edu) * configure: Convert `-' to `_' in specified option names. Accept options with --. Delete --highpri and --have-x-menu options. New options --with-x and --with-x10 replace -window-system. Don't mention options --gnu-malloc, --rel-alloc or --lisp-float-type in help message. Sun Sep 13 06:30:52 1992 Jim Blandy (jimb@pogo.cs.oberlin.edu) * make-dist: Include the `vms' subdirectory in the distribution. Thu Sep 10 16:14:21 1992 Jim Blandy (jimb@pogo.cs.oberlin.edu) * configure: Remove lines starting with "# DIST: " when building lib-src/Makefile and src/Makefile. This allows us to mark the "Makefile.in" files with explanatory comments which won't also get stuck in the Makefiles. Sat Sep 5 07:10:43 1992 Jim Blandy (jimb@pogo.cs.oberlin.edu) * make-dist: Don't use the '+' operator in the sed regular expression that extracts the version number from lisp/version.el; Ultrix sed doesn't seem support the operator. Just double the operand and use *. Tue Sep 1 15:56:14 1992 Jim Blandy (jimb@pogo.cs.oberlin.edu) * Makefile.in: Doc fix. Mon Aug 31 00:25:44 1992 Jim Blandy (jimb@totoro.cs.oberlin.edu) * configure: Rewrite sed command to remove at most one ./ prefix; Ultrix's sed doesn't allow us to apply the * operator to a \( \) group. Tue Aug 25 18:57:41 1992 Richard Stallman (rms@mole.gnu.ai.mit.edu) * Makefile.in (src/paths.h): Use sed, not /bin/sed. Tue Aug 18 16:02:22 1992 Jim Blandy (jimb@pogo.cs.oberlin.edu) * make-dist: Go ahead and build a new TAGS file, unless the --newer option was specified. Don't try to delete a TAGS file from etc; it's not kept there, and shouldn't be deleted anyway. Fri Aug 14 12:54:25 1992 Jim Blandy (jimb@pogo.cs.oberlin.edu) * make-dist: If the lisp directory contains a default.el, don't distribute it. * configure: When searching signal.h for the type of a signal return handler, make a copy of it, not a symbolic link to it; that way, it will work on systems that don't have symbolic links. Fri Aug 14 12:31:45 1992 Eric S. Raymond (eric@mole.gnu.ai.mit.edu) * make-dist: taught it about vcdiff and rcs2log, added --newer option for generating incremental distributions. Stopped it from generating a TAGS file into the distribution; that sucker is *big*, and easily enough generated with the toplevel makefile. Thu Aug 13 13:02:31 1992 Jim Blandy (jimb@pogo.cs.oberlin.edu) * configure: When writing config.status, don't prefix progname with a '.'; it might be absolute. Wed Aug 5 13:54:39 1992 Jim Blandy (jimb@pogo.cs.oberlin.edu) * configure: Choose to use X11 if either /usr/lib/libX11.a or /usr/include/X11 exist, not only if both exist. Mon Jul 27 17:41:50 1992 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu) * make-dist: Make the new external-lisp directory a duplicate of the external-lisp directory, not the lisp directory. Tue Jul 7 14:47:31 1992 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu) * Makefile.in (clean, mostlyclean): Don't bother trying to `make clean' in arch-lib; it doesn't even have a Makefile. * Makefile.in (clean, mostlyclean): In the test which tries to distinguish between the build directory, which should be cleaned, and the installed directory, which shouldn't, cd to `${emacsdir}', not `${DESTDIR}${LIBDIR}'. Tue Jun 30 05:05:29 1992 Jim Blandy (jimb@pogo.cs.oberlin.edu) * make-dist: Be sure to delete the .c and .h files that YACC and BISON create from getdate.y. * external-lisp: New directory; see `external-lisp/README'. * make-dist: Added support for the external-lisp subdirectory. * make-dist: Changed message which complains that make-dist wasn't invoked in the right directory to indicate which files it was looking for. Mon Jun 29 16:24:41 1992 Jim Blandy (jimb@pogo.cs.oberlin.edu) * configure: Add comments explaining why we can't translate character ranges or control characters in `tr'. Wed Jun 24 00:18:54 1992 Jim Blandy (jimb@pogo.cs.oberlin.edu) * configure: When generating the configuration message, we used to build the message from the start so that each line began with "# " so that it would be a comment in `config.status'. However, this causes trouble if any of the variables we use in the message expand to more than one line of text - as gnu_malloc_reason sometimes does. So instead, we build the message as it should be printed to the user (i.e. without the "# " prefixes), and stick on the "# "s when we write it to `config.status'. * Makefile.in (clean, mostlyclean): Don't neglect to clean out `lib-src' and `arch-lib'. * configure: When generating report and `config.status' file, note that bindir only determines where `make install' and `build-install' will place the executables; this should make it clear that the ordinary build process will not try to install things. Wed Jun 10 19:20:27 1992 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu) * make-dist: Change messages to say that we are 'making links to X', rather than 'copying X'. And put `' quotes around file names. * make-dist: Include '.tmp' in the name of the staging directory. * make-dist: Pass the `-f' option to rm when you're not sure that the files you're removing actually exist. * make-dist: When setting up etc/COPYING, always nuke whatever is there, and then copy it in, to make sure we get a real file. * make-dist: Don't try to distribute *.defns files any more. The only such file was for simula.el, which has been superceded by a version which doesn't have a separate .defns file. Thu May 28 09:51:46 1992 Ken Raeburn (Raeburn@Cygnus.COM) * make-dist: Don't distribute configured versions of config.h.in, paths.h.in, Makefile.in in src. * configure: Delete .tmp files before creating them; don't bother trying to make final targets writeable first, since it won't matter to move-if-change. Tue May 19 18:33:04 1992 Jim Blandy (jimb@pogo.cs.oberlin.edu) * Makefile.in (mkdir, lockdir): Don't put dashes in front of the mkdir and chmod in the center of all the conditionals. GNU Make will strip these out, but other makes won't. Mon May 18 03:14:40 1992 Jim Blandy (jimb@pogo.cs.oberlin.edu) * make-dist: Include move-if-change in list of files to distribute. Mon May 4 20:46:16 1992 Jim Blandy (jimb@pogo.cs.oberlin.edu) * configure: Remove any "." elements from the program name. * configure: Don't record the values of all the possible arguments in config.status; only record the options that the user specified. * configure: Use move-if-change to move in the new src/config.h. Wed Apr 29 23:13:25 1992 Ken Raeburn (Raeburn@Cygnus.COM) * move-if-change: New file, copied from gcc release. * Makefile.in (src/paths.h): Use it, and put the "sed" output into a temp file, so we don't update paths.h if an error occurs or if it doesn't need changing. Tue Apr 28 17:00:07 1992 Jim Blandy (jimb@pogo.cs.oberlin.edu) * Makefile.in (src/paths.h): Do not install a value for the PATH_SUPERLOCK value; that macro doesn't exist anymore. * build-install.in: Same thing. Fri Apr 24 02:10:56 1992 Jim Blandy (jimb@pogo.cs.oberlin.edu) * make-dist: Check the flag called "make_tar", not "make_dir"; the latter, being a typo, is always false, resulting in a program whose default behaviour is to painstakingly build a copy of the source tree, and then delete it. Rah. * Makefile.in: Add dist target, and comment for it. * configure: When scanning for a declaration for signal, create a symbolic link with a name ending in .c, so the compiler won't complain that it's only been given .h files. * configure: Check whether there are any arguments available before shifting to get the value of a non-boolean parameter. * make-dist: Doc fix. Mon Apr 20 09:54:48 1992 Jim Blandy (jimb@pogo.cs.oberlin.edu) * configure: Instead of grepping /usr/include/signal.h for a signal declaration, run /usr/include/signal.h or /usr/include/sys/signal.h through cpp and grep for the declaration. * configure: Redirect the output of grep to /dev/null instead of using grep -s - that flag means different things on other systems. * Makefile.in: Use 'buildlisppath' instead of 'dumplisppath', since the former is recognizable even if you don't know what 'dumping' is. * configure: Accomodate that change. * configure: Accept options for all of the directories you can change in the Makefile. * configure: Accept "-OPTION VALUE" as well as "-OPTION=VALUE". * INSTALL: Mention that you have to copy all the 'FOO.in' files to FOO before you can use them. * build-install.in: Made the "Where To Install Things" section conform with the similar section from Makefile.in. Copied section which builds src/paths.h from src/paths.h.in from the Makefile. Sun Apr 19 05:29:03 1992 Jim Blandy (jimb@pogo.cs.oberlin.edu) * configure: Write config.status to pass its command-line arguments on to configure, so that people can use it to recreate an old configuration, with minor changes. Thu Apr 16 22:49:13 1992 Jim Blandy (jimb@pogo.cs.oberlin.edu) * configure: Don't rely on option variables being unset if their values are the empty string. In particular, when producing the English report, don't assume that highpri will be unset when no increased priority has been requested; -highpri='' should be the same as omitting -highpri altogether. * configure: Fix dumb bug: when running the system and machine description files through cpp, mark those lines that we want to evaluate with the string '@configure@', and then only evaluate them. This way if the files include anything that actually generates text (type definitions or external declarations, say), we won't try to eval it. Sat Apr 11 16:00:52 1992 Jim Blandy (jimb@pogo.cs.oberlin.edu) * make-dist: New shell script. * configure: When creating foo from foo.in, make foo read-only to remind people to edit the .in file instead. * INSTALL: Changed references to config.h-dist to config.h.in. The "BUILDING GNU EMACS BY HAND" section neglected to mention how to build src/paths.h from src/paths.h.in; added a paragraph to do this. * configure, Makefile, build-install: Changed filenames like FOO-dist to FOO.in. Wed Apr 8 00:58:46 1992 Jim Blandy (jimb@pogo.cs.oberlin.edu) * Makefile, build-install: Renamed to Makefile.in and build-install.in; the configure script will edit these to produce the usable Makefile and build-install. * configure: Changed to produce ./Makefile, ./build-install, lib-src/Makefile, and src/Makefile from their *.in counterparts, instead of editing them in place. Tue Apr 7 16:44:54 1992 Jim Blandy (jimb@pogo.cs.oberlin.edu) * Makefile: Re-arranged so that the undumped Emacs will search ../lisp *after* the site's local elisp files. (locallisppath, dumplisppath): New variables. (lisppath): This variable's default value is now chosen based on $(locallisppath) and $(lispdir); while it used to be the customization point for adding site-local elisp directories to load-path, that job is now handled mostly by locallisppath. (src/paths.h): Edit the value of a new macro, PATH_DUMPLOADSEARCH. Check the values being assigned to the *LOADSEARCH macros for null path elements (like '::' in 'foo::bar'). * configure: When checking if the machine- and system-dependent files define a particular macro or not, actually run them through CPP and test the macros with #ifs, instead of just grepping for the macros' names. In particular, check for SYSTEM_MALLOC in this way. Fri Apr 3 22:25:50 1992 Richard Stallman (rms@mole.gnu.ai.mit.edu) * Makefile (install): Don't use -s in install. (Keep the symbols.) Thu Apr 2 01:54:22 1992 Jim Blandy (jimb@pogo.cs.oberlin.edu) * configure: Make the config.status file an executable shell script which will recreate the same configuration. Include the verbal description of the current configuration as a comment in the script. * INSTALL: Doc fix. * Makefile: brought the Makefile up to the GNU coding standards, as described in standards.text: (TAGS): New name for the target which rebuilds the tags table. (check): New target; doesn't do anything yet. (mostlyclean): New target, synonymous with clean. (realclean): New target. Currently, this just calls the subdirectories's makefiles and then deletes config.status. (INSTALL, INSTALLFLAGS, INSTALL_PROGRAM, INSTALL_DATA): New variables. Installation directory variables changed to conform. (install, install.sysv, install.xenix, install.aix): Changed the code which copies the directories into their installed location to allow the installed locations to be in several different directories; the old version assumed that they would all be in $(emacsdir). (mkdir, lockdir): Allow the installed locations to be in several different directories. * INSTALL: Doc fix. * build-install: Use the same variable names as the Makefile. Allow the installed locations to be in several different directories. Tue Mar 31 10:25:57 1992 Jim Blandy (jimb@pogo.cs.oberlin.edu) * Makefile (src/paths.h): Instead of using a single sed command to edit both the PATH_LOCK and PATH_SUPERLOCK macros, edit the two separately, and don't forget to append "/!!!SuperLock!!!" to the value of the PATH_SUPERLOCK macro. * config.emacs: Renamed to configure, for consistency with other GNU products. Internal references changed. INSTALL, Makefile: References changed. * lock: New directory, which should always be empty. If this directory doesn't exist, Emacs won't complain; it just won't lock. Having this here means that people can just unpack Emacs, build it, and have locking work. * share-lib: Re-renamed to etc, for the sake of tradition. * config.emacs: Changed default value for datadir to ../etc. * INSTALL, README: Adjusted. Wed Mar 18 15:54:58 1992 Jim Blandy (jimb@pogo.cs.oberlin.edu) * config.emacs: Guess the value for LOADLIBES in lib-src/Makefile by running CPP on the appropriate s/*.h and m/*.h files. Mon Mar 16 17:38:50 1992 Jim Blandy (jimb@pogo.cs.oberlin.edu) * config.emacs: Make sure to set the "exit on error" flag once we've removed config.status; errors should abort the configuration. Sat Feb 15 17:23:07 1992 Jim Blandy (jimb at pogo.cs.oberlin.edu) * config.emacs: Added -distribute option, so that the Makefile paths are in their proper form. I don't know why this matters. Fri Feb 14 13:58:57 1992 Jim Blandy (jimb at pogo.cs.oberlin.edu) * local-lisp: New directory, empty in the distribution, for people to put local elisp code in. * config.emacs: Include it in the default load path. * README: Document it. Thu Jan 30 10:26:45 1992 Jim Blandy (jimb at pogo.cs.oberlin.edu) * config.emacs: Guess the type of signal handling functions based on the contents of /usr/include/signal.h. * config.emacs: Print out progress report messages. * Makefile (src/paths.h): Don't generically replace /usr/local/lib/emacs with LIBROOT. This can hide bugs in the editing of the other entries, and each entry should be dealt with explicitly anyway. * build-install: Converted from C-shell to Bourne shell. * config.emacs: Edit build-install properly. * config.emacs: Doc fix. Mon Jan 27 16:29:53 1992 Richard Stallman (rms@mole.gnu.ai.mit.edu) * Makefile (install): Remove `B' from tar xf command. Mon Jan 13 12:00:14 1992 Jim Blandy (jimb at pogo.cs.oberlin.edu) * config.emacs: Removed support for the `maintain-environment' option; the only important difference between this and its absence has been removed. * INSTALL: Removed mention of `maintain-environment'. * config.emacs: Fix arguments to sed when processing boolean arguments. Thu Dec 5 14:39:44 1991 Jim Blandy (jimb at pogo.gnu.ai.mit.edu) * config.emacs: New file, to help automate the installation process. * Makefile: Lots of changes to support the separation of etc into architecture-dependent and -independent files: (EMACSROOT): New variable, giving the directory under which all of Emacs's libraries should be installed. Changed rest of file to use it. (LIBDIR): Now denotes only architecture-dependent dir - relevant cha (DATADIR): New variable, denoting architecture-independent dir. (LOCKDIR): New variable, for completeness. (SUBDIR): No more etc, new lib-src. (COPYDIR): No more etc, new arch-lib and share-lib. (src/paths.h): Set PATH_DATA and the LOCK macros too. (src): Now depends on lib-src, not etc. * build-install: Changes parallel to the above. * README: Describe the new arrangement. * vms: New subdirectory for all the VMS stuff. Tue Dec 3 22:06:59 1991 Jim Blandy (jimb at pogo.gnu.ai.mit.edu) * Makefile (LISPPATH): New variable. (src/paths.h): Define PATH_LOADSEARCH according to LISPPATH. Fri Sep 28 22:36:32 1990 Richard Stallman (rms at mole.ai.mit.edu) * Makefile (install, install.sysv, install.xenix): Install wakeup instead of loadst. No need for setuid or setgid. Tue Aug 7 13:19:35 1990 Richard Stallman (rms at sugar-bombs.ai.mit.edu) * Makefile (clean): Clean etc if that's not the installation dir. Thu Apr 26 13:36:18 1990 Richard Stallman (rms at sugar-bombs.ai.mit.edu) * Makefile (paths.h): Make sed alter each name in the path. Tue Aug 30 13:43:43 1988 Richard Stallman (rms at sugar-bombs.ai.mit.edu) * Makefile (install.sysv): Use cpio, not tar. Wed Aug 3 19:20:13 1988 Richard Stallman (rms at sugar-bombs.ai.mit.edu) * Makefile (lockdir): Rename `lock' target. Depend on it from install*, not from `all'. Mon May 16 02:08:08 1988 Richard Stallman (rms at frosted-flakes.ai.mit.edu) * Makefile: Changed LIBDIR and BINDIR back to /usr/local/{emacs,bin} to match build-install and paths.h.