[RAID Evaluator] TemporaryFile= [DiskTypes] UserDisk1A=UserBusA,150000,3600,60,2000.00,12.0,12.0,1000.00 UserDisk2A=UserBusA,150000,5400,60,2000.00,12.0,12.0,1000.00 UserDisk3A=UserBusA,150000,7200,60,2000.00,12.0,12.0,1000.00 UserDisk1B=UserBusB,150000,3600,60,2000.00,12.0,12.0,1000.00 UserDisk2B=UserBusB,150000,5400,60,2000.00,12.0,12.0,1000.00 UserDisk3B=UserBusB,150000,7200,60,2000.00,12.0,12.0,1000.00 [CtlrTypes] DSPAdapter=SCSI,5.0,7,500 UserControllerA=UserBusA,10.0,7,1000 UserControllerB=UserBusB,10.0,7,1000 [Comments Section] Disk parameters are as follows (in order of occurrence in the line): bus - arbitrary character string of 1-15 bytes used to match disks & controllers MTBF - in hours. Used in data reliability calculations RPM - used in performance calculations sectors - sectors per track (only user data sectors) data rate - spiral data rate in KBytes/second seek time - for reads (in msec) seek time - for writes (in msec) capacity - in MBytes (The disk name on the left side of the equals sign shows in the Disk Type window. It is an arbitrary string of up to 15 bytes.) Controller parameters are as follows (in order of occurrence in the line): bus - arbitrary character string of 1-15 bytes used to match disks & controllers bandwidth - in bytes/second drives - maximum physical connectivity requests - controller capability in requests/second (The controller name on the left side of the equals sign shows in the Subsystem Type window. It is an arbitrary string of up to 15 bytes.) [Apple LaserWriter Plus,COM1] feed1=1 feed4=1 orient=2 [windows] device=Digital LN03R ScriptPrinter,pscript.DRV,FILE: [Digital LN03R ScriptPrinter,LPT1] feed1=1 [Digital LN03R ScriptPrinter,FILE] feed1=1 orient=2 EPS=1 [Digital LN03R ScriptPrinter,LPT2] feed1=1