The parenthesized number on an index entry indicates the location of the entry within the book. Entries before the first numbered section in a chapter are identified as Sec. n.0.
|
Click letter for quick access: [Special Characters] A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
Special Characters
/ (cluster root file system) (Sec. 1.2)
|
Click letter for quick access: [Special Characters] A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
A
ac command (Sec. 5.15)
accounting services
commands that are not cluster aware (Sec. 1.2)
managing (Sec. 5.15)
acct command (Sec. 5.15)
adapter
network (Sec. D.3)
addvol command (Sec. 1.2)
CFS warning message (Sec. 11.1.9.1)
cluster alias in /.rhosts (Sec. 9.5.5)
clusters and (Sec. 9.5.5)
LSM and (Sec. 1.2)
repeating on CFS server failover (Sec. 9.5.5)
administering a cluster (Sec. 1.1)
advanced file system
See AdvFS
AdvFS
CFS warning message (Sec. 11.1.9.1)
expanding cluster root (Sec. 1.2)
limit on adding filesets in member root domain (Sec. 9.5.4)
limit on filesets in cluster root domain (Sec. 9.5.2)
limit on filesets in member boot domain (Sec. 9.5.3)
management commands (Sec. 9.5.5)
managing in a cluster (Sec. 9.5)
storage connectivity requirements (Sec. 9.5.7)
AdvFS domain panic (Sec. 11.1.9.2)
avoiding (Sec. 11.1.9.4)
forcible unmounting as result of (Sec. 11.1.9.3)
alias
See also cluster alias
aliasd daemon (Sec. 3.1)
aliasd daemon (Sec. 3.2)
modification of gated configuration files (Sec. 3.2)
RIP support (Sec. 3.1)
application
deleting (Sec. 5.14)
deleting from a cluster (Sec. 5.14)
installing (Sec. 5.14)
application licenses (Sec. 5.13)
application resource name (Sec. 8.0)
archiving (Sec. 9.8)
ARP broadcast errors
when booting cluster member (Sec. D.8.1)
attribute
printer characteristic for clusters (Sec. 7.3)
auditing (Sec. 1.2)
AutoFS
forcibly unmounting file systems (Sec. 7.6.3.1)
forcibly unmounting file systems (Sec. 7.6.3.1.2)
using in a cluster (Sec. 7.6.3.1.1)
autofs command (Sec. 7.6.3)
autofsd daemon (Sec. 7.6.3)
autofsmount (Sec. 7.6.3.1)
autofsmount (Sec. 7.6.3.1.2)
autofsmount command (Sec. 7.6.3)
automount (Sec. 7.6.3.1)
automount (Sec. 7.6.3.1.2)
automount command (Sec. 7.6.3)
|
Click letter for quick access: [Special Characters] A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
B
backing up file systems (Sec. 9.8)
protecting /var directory (Sec. 9.8.1)
balancing application resources (Sec. 8.5)
bcheckrc command (Sec. 5.6)
Berkeley Internet Name Domain
See BIND client
BIND
configuring cluster as client or server (Sec. 7.4)
block devices
cache coherency (Sec. 9.3.6.1)
cache coherency (Sec. 9.3.9)
boot disk
repairing a member's boot disk (Sec. 11.1.5)
boot partition
mirroring (Sec. 10.1)
mounting (Sec. 11.1.10)
panic if already mounted (Sec. 11.1.11)
repairing (Sec. 11.1.10)
bootable tape (Sec. 1.2)
booting
CFS error message during member boot (Sec. 11.1.4)
specifying the cluster_root device at boot time (Sec. 11.1.6)
without a license (Sec. 11.1.1)
bootptab file
default cluster alias and (Sec. 7.9)
broadcast messages
starting wall (Sec. 1.2)
bttape command (Sec. 1.2)
building a kernel
CDSL considerations (Sec. 9.1.3)
|
Click letter for quick access: [Special Characters] A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
C
CAA (Sec. 8.0)
caad daemon (Sec. 8.10)
checking status (Sec. 8.1)
cluster alias and (Sec. 3.15)
monitoring the CAA daemon (Sec. 8.10.3)
registering resources (Sec. 8.6)
relocating application resources (Sec. 8.3.1)
resource name (Sec. 8.0)
restarting the CAA daemon (Sec. 8.10.2)
starting application resources (Sec. 8.4.1)
stopping application resources (Sec. 8.4.2)
troubleshooting (Sec. 11.1.1)
using EVM with (Sec. 8.11)
caad daemon (Sec. 8.10)
monitoring (Sec. 8.10.3)
restarting (Sec. 8.10.2)
caa_register command (Sec. 8.6)
caa_relocate command (Sec. 8.3.1)
caa_stat command (Sec. 8.1)
cache coherency and block devices (Sec. 9.3.9)
cache synchronization
df and showfsets commands (Sec. 1.2)
df and showfsets commands (Sec. 1.2)
caution
clu_delete_member (Sec. 5.8)
deleting a cluster member (Sec. 5.8)
sysconfigdb -u command (Sec. 5.11.1)
CDFS
limitations on CDFS in clusters (Sec. 9.7)
managing in a cluster (Sec. 9.7)
read-only access supported (Sec. 9.3.9)
CD-ROM drive (Sec. 9.2.7)
CD-ROM file system
See CDFS
CDSL
backing up (Sec. 9.8)
checking (Sec. 9.1.2)
copying (Sec. 9.1.1)
exporting (Sec. 9.1.4)
Korn shell and (Sec. 11.2.3)
maintaining (Sec. 9.1.2)
mkcdsl command (Sec. 9.1.1)
working with (Sec. 9.1)
CFS
adjusting memory usage (Sec. 9.3.6.3)
cfsmgr command (Sec. 9.3)
direct I/O (Sec. 9.3.6.2)
EMFILE errors (Sec. 9.3.6.3)
errors at boot time (Sec. 11.1.4)
failover (Sec. 9.3)
gathering statistics (Sec. 9.3)
limitations on failover (Sec. 9.3.1)
managing (Sec. 9.3)
optimizing (Sec. 9.3.6)
partitioning file systems (Sec. 9.3.8)
performance (Sec. 9.3)
raw I/O (Sec. 9.3.6.2)
relocating CFS server (Sec. 9.3.3.7)
relocating member root domain (Sec. 9.3.3.4)
restrictions on (Sec. 9.3.9)
servers and (Sec. 9.3)
statistics (Sec. 9.3)
CFS cache synchronization
df and showfsets command (Sec. 1.2)
df and showfsets command (Sec. 1.2)
cfsd daemon
effect of SIGHUP signal (Sec. 9.3.3.1)
EVM events generated by (Sec. 9.3.3.2)
load balancing with (Sec. 9.3.3)
modifying configuration file (Sec. 9.3.3.3)
starting and stopping (Sec. 9.3.3.1)
use in a cluster (Sec. 9.3)
use in a cluster (Sec. 9.3.3)
cfsd.conf configuration file
modifying (Sec. 9.3.3.3)
cfsmgr command (Sec. 9.3)
cfsstat command (Sec. 9.3)
direct I/O statistics (Sec. 9.3.6.2.3)
cfs_async_biod_threads attribute (Sec. 9.3.6.1)
changing cluster name or IP address (Sec. 5.11)
changing default cluster alias (Sec. 5.11)
changing member name, IP address, or interconnect address (Sec. 5.12)
changing the cluster name or IP address (Sec. 5.11.2)
characteristic
printer characteristic for clusters (Sec. 7.3)
chargefee command (Sec. 5.15)
ckpacct command (Sec. 5.15)
client
NFS (Sec. 7.6.2.2)
NFS clients and CDSL use (Sec. 7.6.2.3)
cloned filesets
considerations when used in cluster root domain (Sec. 9.5.2)
limit on filesets in cluster root domain (Sec. 9.5.2)
cloning
lack of support in clusters (Sec. 1.2)
CLSM
See LSM
cluamgr command (Sec. 3.0)
description (Sec. 3.4)
leaving an alias (Sec. 3.6)
nogated option (Sec. 3.3)
restarting routing for cluster aliases (Sec. 3.5)
clua_services file (Sec. 3.2)
modifying entries in (Sec. 3.6)
cluster
administering (Sec. 1.1)
CAA (Sec. 8.0)
CDSL (Sec. 9.1.1)
CFS (Sec. 9.3)
cluster alias
aliasd daemon (Sec. 3.1)
aliasd daemon (Sec. 3.2)
CAA and (Sec. 3.15)
changing default (Sec. 5.11)
default (Sec. 3.1)
deleting (Sec. 3.8)
extending port space (Sec. 3.11)
handling NFS requests (Sec. 3.14)
leaving (Sec. 3.6)
modifying attributes of (Sec. 3.5)
monitoring (Sec. 3.6)
planning for (Sec. 3.2)
properties (Sec. 3.1)
restarting routing for (Sec. 3.5)
RIS and (Sec. 7.9)
routing options (Sec. 3.13)
vMAC support (Sec. 3.12)
cluster alias attribute
router priority (Sec. 3.1)
cluster alias attributes
selection priority (Sec. 3.1)
selection weight (Sec. 3.1)
cluster application availability
See CAA
cluster configuration
cluster alias (Sec. 3.2)
DHCP (Sec. 7.1)
inetd daemon (Sec. 7.7)
mail (Sec. 7.8)
NFS (Sec. 7.6.1)
NIS (Sec. 7.2)
NTP (Sec. 7.5)
printing (Sec. 7.3)
tools (Sec. 2.2)
cluster event (Sec. A.0)
cluster file system
See CFS
cluster Logical Storage Manager
See LSM
cluster member (Sec. 4.2.1)
defined (Sec. 4.2.1)
deleting (Sec. 5.8)
managing (Sec. 5.0)
rebooting (Sec. 5.7)
shutdown, halt, reboot (Sec. 5.4)
cluster partition (Sec. 4.2.1)
cluster quorum
calculating (Sec. 4.2)
cluster root (Sec. 1.2)
expanding (Sec. 1.2)
mirroring (Sec. 10.1)
specifying the cluster_root device at boot time (Sec. 11.1.6)
verify command and (Sec. 9.11.1)
cluster root domain
cloned filesets used in (Sec. 9.5.2)
defined in cluster (Sec. 1.2)
limits on filesets in (Sec. 9.5.2)
clusterwide file system
backing up (Sec. 9.8)
cluster_adjust_expected_votes kernel attribute (Sec. 4.10.1)
cluster_alias
joining (Sec. 3.4)
specifying (Sec. 3.4)
cluster_event event attribute (Sec. 1.2)
cluster_expected_votes attribute (Sec. 4.2.2)
cluster_node_votes attribute (Sec. 4.2.4)
cluster_qdisk_votes attribute (Sec. 4.2.5)
clu_alias script (Sec. 3.2)
clu_alias.config
modifying with SysMan Menu (Sec. 3.0)
clu_alias.config file (Sec. 3.2)
clu_delete_member command (Sec. 5.8)
sample log file (Sec. C.0)
clu_quorum command
defining a quorum disk (Sec. 4.5)
displaying quorum configuration information using (Sec. 4.6)
clu_wall daemon (Sec. 1.2)
CNX
CFS warning message (Sec. 11.1.4)
CNX MGR
panics (Sec. 4.9)
cnx_pinger broadcast errors
when booting cluster member (Sec. D.8.1)
commands
cluster (Sec. 1.1)
cluster commands and utilities (Sec. 1.1)
differences with Tru64 UNIX (Sec. 1.2)
that are not cluster-aware (Sec. 1.2)
common configuration file
/etc/rc.config.common file (Sec. 1.2)
common subnet
when to use (Sec. 3.3)
concurrent direct I/O (Sec. 9.3.6.2)
gathering statistics (Sec. 9.3.6.2.3)
configuration cloning
lack of support in clusters (Sec. 1.2)
configuration file
rc.config file (Sec. 5.1)
setting run-time configuration variables (Sec. 1.2)
configuration report
generating with HP Insight Manager (Sec. 2.10)
connection manager (Sec. 4.1)
See also CNX
monitoring panics from (Sec. 4.8)
troubleshooting (Sec. 4.10)
connectivity
AdvFS and storage connectivity (Sec. 9.5.7)
console commands
restrictions on MC_CABLE command (Sec. 11.2.2)
context-dependent symbolic link
See CDSL
copying a CDSL (Sec. 9.1.1)
crash dump (Sec. 11.1.12)
crash dumps
generating (Sec. 11.1.12)
generating when member hung (Sec. 11.1.12.1)
creating file systems (Sec. 9.6)
critical voting member
quorum loss and shutdown (Sec. 5.5)
crontab files (Sec. 5.15)
current vote (Sec. 4.2.3)
current vote (Sec. 4.3)
Cw mail macros (Sec. 7.8.1.2)
|
Click letter for quick access: [Special Characters] A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
D
daemon
aliasd (Sec. 3.2)
autofsd (Sec. 7.6.3)
caad (Sec. 8.10)
gated (Sec. 3.1)
inetd (Sec. 7.7)
lockd (Sec. 7.6.1)
printer (Sec. 7.3)
routed (Sec. 3.1)
statdd (Sec. 7.6.1)
database applications
raw I/O (Sec. 9.3.6.2)
Dataless Management Services
See DMS
DECnet protocol (Sec. 7.8)
default cluster alias (Sec. 3.1)
default cluster alias (Sec. 3.1)
changing (Sec. 5.11)
NFS clients using (Sec. 7.6.2.2)
relationship to out_alias service attribute (Sec. 7.10)
DEFAULTALIAS keyword (Sec. 3.1)
device
determining device location (Sec. 9.2.2)
direct-access I/O (Sec. 9.4.1)
managing third-party storage (Sec. 9.2.3)
single-server (Sec. 9.4.1)
device request dispatcher
drdmgr command (Sec. 9.4)
device special file management utility (Sec. 9.2.1)
df command (Sec. 1.2)
stale information (Sec. 1.2)
DHCP
configuring (Sec. 7.1)
direct I/O (Sec. 9.3.6.2)
gathering statistics on (Sec. 9.3.6.2.3)
direct-access I/O device (Sec. 9.4.1)
disk
determining location (Sec. 9.2.2)
diskusg command (Sec. 5.15)
DMS
lack of support in cluster (Sec. 1.2)
dodisk command (Sec. 5.15)
domain
expanding cluster root (Sec. 1.2)
drdmgr command (Sec. 9.3.3.7)
drdmgr command (Sec. 9.4)
drd_target_reset_wait attribute (Sec. 9.2.3)
dsfmgr command (Sec. 9.2.1)
dumps (Sec. 11.1.12)
DVD-ROM drive (Sec. 9.2.7)
Dynamic Host Configuration Protocol
See DHCP
|
Click letter for quick access: [Special Characters] A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
E
EMFILE errors
adjusting CFS memory usage (Sec. 9.3.6.3)
enhanced security (Sec. 1.2)
NIS configuration (Sec. 7.2.1)
error message
during member boot (Sec. 11.1.4)
/etc/bootptab file
default cluster alias and (Sec. 7.9)
/etc/clua_services file
modifying entries in (Sec. 3.6)
/etc/clua_services file (Sec. 3.2)
/etc/clu_alias.config
modifying with SysMan Menu (Sec. 3.0)
/etc/clu_alias.config file (Sec. 3.2)
/etc/exports.aliases file (Sec. 3.2)
/etc/fstab file
swap entries (Sec. 9.9)
/etc/gated.conf file (Sec. 3.2)
/etc/gated.conf.member file (Sec. 3.2)
/etc/hosts file (Sec. 5.3)
/etc/printcap file (Sec. 1.2)
/etc/rc.config file (Sec. 1.2)
/etc/rc.config file (Sec. 5.1)
/etc/rc.config.common file (Sec. 1.2)
/etc/rc.config.site file (Sec. 1.2)
/etc/sysconfigtab file
ics_tcp_ports attribute (Sec. D.8.3)
ics_tcp_rendezvous_port attribute (Sec. D.8.3)
event
cluster (Sec. A.0)
event attributes
cluster_event (Sec. 1.2)
Event Management
See EVM
EVM (Sec. 1.2)
CAA and (Sec. 8.11)
expected vote
calculating (Sec. 4.3)
cluster (Sec. 4.2.2)
cluster (Sec. 4.3)
member-specific (Sec. 4.2.2)
member-specific (Sec. 4.3)
exporting a CDSL (Sec. 9.1.4)
exporting file systems (Sec. 1.2)
exports.aliases file (Sec. 3.2)
|
Click letter for quick access: [Special Characters] A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
F
failover (Sec. D.8.2)
AdvFS requirements (Sec. 9.5.7)
boot partition (Sec. 11.1.10)
CFS (Sec. 9.3)
limitations on CFS failover (Sec. 9.3.1)
network (Sec. 6.2)
file system
avoiding full (Sec. 9.3.6.5)
backing up (Sec. 9.8)
creating in a cluster (Sec. 9.6)
freezing in a cluster (Sec. 9.3.5)
managing AdvFS in a cluster (Sec. 9.5)
managing CDFS (Sec. 9.7)
managing in a cluster (Sec. 9.3)
partitioning (Sec. 9.3.8)
restoring (Sec. 9.8)
UFS read/write limited support (Sec. 1.2)
floppy disk
UFS read-only file system and (Sec. 9.2.6)
focus (Sec. 2.8)
considerations in SysMan Menu (Sec. 2.4.1)
defined (Sec. 2.4.1)
specifying in SysMan Menu (Sec. 2.4.2)
forced unmounting
AdvFS (Sec. 11.1.9.3)
AutoFS (Sec. 7.6.3.1)
freezefs command
using in a cluster (Sec. 9.3.5)
freezing file systems
using freezefs in a cluster (Sec. 9.3.5)
fuser lack of cluster-awareness (Sec. 1.2)
fwtmp command (Sec. 5.15)
|
Click letter for quick access: [Special Characters] A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
G
gated command (Sec. 1.2)
gated daemon (Sec. 3.1)
gated.conf file (Sec. 3.2)
gated.conf.member file (Sec. 3.2)
|
Click letter for quick access: [Special Characters] A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
H
halt command (Sec. 5.4)
hang
due to quorum loss (Sec. 5.5)
hardware configuration (Sec. 9.2.2)
holidays file for accounting services (Sec. 5.15)
hosts file (Sec. 5.3)
HP Insight Manager
configuration report (Sec. 2.10)
display-only considerations (Sec. 2.1.4)
integration with SysMan (Sec. 2.1.2)
invoking (Sec. 2.9.1)
testing (Sec. 2.6)
using in a cluster (Sec. 2.9)
web agents initialized by (Sec. 2.6)
hwmgr command (Sec. 1.2)
hwmgr command (Sec. 9.2.2)
obtaining network adapter information (Sec. D.3)
|
Click letter for quick access: [Special Characters] A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
I
I/O barrier
drd_target_reset_wait attribute (Sec. 9.2.3)
identifying disks (Sec. 9.2.2)
ifaccess.conf
updating (Sec. 6.1)
inetd daemon
configuring (Sec. 7.7)
init -s command (Sec. 5.6)
init command (Sec. 1.2)
halt and reboot (Sec. 5.4)
PID (Sec. 1.2)
Insight Manager
See HP Insight Manager
installing a layered application (Sec. 5.14)
interconnect address
changing for a cluster member (Sec. 5.12)
Internet server daemon
See inetd daemon
I/O barrier (Sec. 9.2.3)
I/O data caching (Sec. 9.3.6.2)
iostat command (Sec. 1.2)
IP address
changing for a cluster (Sec. 5.11)
changing for a cluster (Sec. 5.11.2)
changing for a member (Sec. 5.12)
cluster alias (Sec. 3.1)
IP router (Sec. 6.3)
ipport_userreserved attribute (Sec. 3.11)
|
Click letter for quick access: [Special Characters] A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
J
Java
SysMan Menu PC application (Sec. 2.7)
jumbo frame (Sec. D.2.1)
|
Click letter for quick access: [Special Characters] A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
K
kernel attributes
managing (Sec. 5.2)
kernel build
and /vmunix CDSL (Sec. 9.1.3)
kill command (Sec. 1.2)
Korn shell
pathnames and (Sec. 11.2.3)
|
Click letter for quick access: [Special Characters] A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
L
LAN
updating ifaccess.conf (Sec. 6.1)
LAN interconnect
migrating from Fast Ethernet to Gigabit Ethernet (Sec. D.7)
migrating from Memory Channel to (Sec. D.5)
migrating from Memory Channel to (Sec. D.6)
monitoring (Sec. D.4)
tuning (Sec. D.2)
last command (Sec. 5.15)
lastcomm command (Sec. 5.15)
lastlogin command (Sec. 5.15)
layered applications
installing and deleting (Sec. 5.14)
license
booting without (Sec. 11.1.1)
licensing (Sec. 5.0)
application licenses (Sec. 5.13)
lmf reset command (Sec. 5.6)
load balancing (Sec. 9.3.3)
alias and application (Sec. 3.1)
CFS (Sec. 9.3)
cluster alias and application (Sec. 3.14)
cluster alias and application (Sec. 3.9)
lockd daemon (Sec. 7.6.1)
Logical Storage Manager
See LSM
loopback mount
lack of support in cluster (Sec. 7.6.2.4)
lpr command (Sec. 7.3)
lprsetup command (Sec. 1.2)
LSM
addvol command and (Sec. 1.2)
differences on a cluster (Sec. 1.2)
quorum disk (Sec. 10.1)
RAID 5 (Sec. 10.1)
restrictions on LSM in a cluster (Sec. 10.1)
|
Click letter for quick access: [Special Characters] A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
M
mail
configuring (Sec. 7.8)
Cw macros (Sec. 7.8.1.2)
files (Sec. 7.8.1.1)
mailconfig and mailsetup commands (Sec. 7.8.1)
statistics for mail (Sec. 7.8.1.1)
mail protocol
cluster support (Sec. 7.8)
mailconfig command (Sec. 7.8.1)
mailsetup command (Sec. 7.8.1)
management tools
available interfaces (Sec. 2.1.4)
quick start (Sec. 2.1.1)
managing AdvFS in a cluster (Sec. 9.5)
managing CDFS in a cluster (Sec. 9.7)
managing cluster file systems (Sec. 9.3)
managing device special files (Sec. 9.2.1)
MC_CABLE command
restrictions on (Sec. 11.2.2)
member (Sec. 4.2.1)
changing IP address (Sec. 5.12)
defined (Sec. 4.2.1)
managing (Sec. 5.0)
mounting boot partition (Sec. 11.1.10)
relocating root domain (Sec. 9.3.3.4)
repairing boot disk (Sec. 11.1.5)
root domain (Sec. 1.2)
shutdown, halt, reboot (Sec. 5.4)
shutting down (Sec. 5.5)
member boot domain
limits on filesets in (Sec. 9.5.3)
member root domain
limits on filesets in (Sec. 9.5.4)
membership
monitoring (Sec. 4.8)
Memory Channel
migrating from LAN interconnect to (Sec. D.6)
migrating to LAN interconnect from (Sec. D.5)
memory file system
See MFS
memory mapped file (Sec. 9.3.6.4)
Message Transport System
See MTS
MFS (Sec. 9.3.10)
cluster support (Sec. 9.3.7)
read access support (Sec. 1.2)
write access supported (Sec. 1.2)
migration
Fast Ethernet LAN to Gigabit Ethernet LAN (Sec. D.7)
LAN interconnect to Memory Channel (Sec. D.6)
Memory Channel to LAN interconnect (Sec. D.5)
mkcdsl command (Sec. 9.1.1)
monacct command (Sec. 5.15)
monitoring membership (Sec. 4.8)
mount command
loopback mounts lack of support (Sec. 7.6.2.4)
mounting NFS file systems on cluster members (Sec. 7.6.2.3)
NFS clients using cluster alias (Sec. 7.6.2.2)
partitioning file systems (Sec. 9.3.8)
server_only option (Sec. 9.3.8)
mounting a member's boot partition (Sec. 11.1.10)
moving /tmp (Sec. 11.2.1)
MTS (Sec. 7.8)
MTU (Sec. D.2.1)
|
Click letter for quick access: [Special Characters] A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
N
name
changing for a cluster (Sec. 5.11)
changing for a member (Sec. 5.12)
netconfig command (Sec. 6.4)
NetRAIN (Sec. 6.2)
configuring as LAN cluster interconnect in existing cluster (Sec. D.1)
manual failover (Sec. D.8.2)
tuning as a LAN interconnect (Sec. D.2)
network
failover (Sec. 6.2)
troubleshooting (Sec. 11.1.13)
network adapter
obtaining operational information about (Sec. D.3)
Network File System
See NFS
Network Information Service
See NIS
Network Interface Failure Finder
See NIFF
network interfaces
update ifaccess.conf when changing (Sec. 6.1)
network port
alias and (Sec. 3.1)
extending number in cluster (Sec. 3.11)
network routing
cluster alias configurations (Sec. 3.13)
Network Time Protocol
See NTP
network time synchronization (Sec. 7.5)
net_wizard command (Sec. 6.4)
NFS
configuring (Sec. 7.6.1)
exporting file systems (Sec. 1.2)
failover of client file system not supported (Sec. 9.3.10)
forcibly unmounting file systems (Sec. 7.6.3.1)
forcibly unmounting file systems (Sec. 7.6.3.1.2)
interaction with cluster aliases (Sec. 3.14)
limitations on (Sec. 7.6.2.5)
loopback mount (Sec. 7.6.2.4)
mounting file systems (Sec. 7.6.3.1)
mounting file systems (Sec. 7.6.3.1.1)
mounting file systems (Sec. 7.6.3.1.2)
using in a cluster (Sec. 7.6.3)
NFS client
using correct alias (Sec. 7.6.2.2)
NFS file system
mounting via CDSLs (Sec. 7.6.2.3)
NIFF (Sec. 1.2)
NIFF (Sec. 6.2)
NIS (Sec. 7.2)
configuring (Sec. 7.2)
enhanced security and NIS configuration (Sec. 7.2.1)
Yellow Pages (Sec. 7.2)
No such device: nr0 message
from NetRAIN (Sec. D.8.2)
node vote (Sec. 4.2.4)
NSPOF (Sec. D.1)
NTP
configuring (Sec. 7.5)
external servers (Sec. 7.5.2)
nulladm command (Sec. 5.15)
|
Click letter for quick access: [Special Characters] A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
O
ogated daemon
not supported in a cluster (Sec. 3.1)
Open Shortest Path First routing protocol
See OSPF
optimization
CFS (Sec. 9.3.6)
optimizing CFS
direct I/O (Sec. 9.3.6.2)
load balancing (Sec. 9.3.3)
read-ahead threads (Sec. 9.3.6.1)
strategies (Sec. 9.3.6.6)
write-behind threads (Sec. 9.3.6.1)
OSPF (Sec. 6.3)
|
Click letter for quick access: [Special Characters] A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
P
pac command (Sec. 5.15)
panic
accessing boot partition after (Sec. 11.1.10)
from CNX MGR (Sec. 4.9)
from connection manager (Sec. 4.9)
when boot partition is already mounted (Sec. 11.1.11)
panics
connection manager (Sec. 4.9)
partition, cluster (Sec. 4.2.1)
partitioning
drd_target_reset_wait attribute (Sec. 9.2.3)
partitioning file systems (Sec. 9.3.8)
performance
avoiding nearly full file systems (Sec. 9.3.6.5)
CFS load balancing (Sec. 9.3)
improving (Sec. D.2)
optimizing CFS (Sec. 9.3.6)
PIDs (Sec. 1.2)
ping command
troubleshooting with (Sec. 11.1.13)
port
application inability to map to (Sec. D.8.3)
broadcast (Sec. D.8.3)
cluster alias and network (Sec. 3.1)
extending number in cluster (Sec. 3.11)
nonbroadcast (Sec. D.8.3)
prctmp command (Sec. 5.15)
prdaily command (Sec. 5.15)
Prestoserve
lack of support in cluster (Sec. 1.2)
lack of support in cluster (Sec. 1.2)
printer daemon (Sec. 7.3)
printing (Sec. 1.2)
configuring (Sec. 7.3)
:on characteristic for clusters (Sec. 7.3)
spool file (Sec. 7.3)
printpw command (Sec. 5.15)
process control
kill command (Sec. 1.2)
process identifiers
See PIDs
protocols.map file (Sec. 7.8.1.1)
prtacct command (Sec. 5.15)
ps command (Sec. 1.2)
|
Click letter for quick access: [Special Characters] A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
Q
quorum
calculating (Sec. 4.3)
loss of (Sec. 4.3)
single-user mode and (Sec. 4.2.4)
single-user mode and (Sec. 5.6)
quorum algorithm (Sec. 4.3)
quorum disk
configuring (Sec. 4.5)
LSM and (Sec. 10.1)
LSM and (Sec. 4.5)
number of votes (Sec. 4.5)
replacing (Sec. 4.5.1)
trusted (Sec. 4.5)
using (Sec. 4.5)
votes (Sec. 4.2.5)
quorum information
displaying (Sec. 4.6)
quorum loss (Sec. 4.3)
preventing during member shutdown (Sec. 5.5)
quorum vote (Sec. 4.3)
calculating (Sec. 4.3)
quotas
managing hard limits in cluster (Sec. 9.5.6.1)
setting hard limits in cluster (Sec. 9.5.6.2)
supported in a cluster (Sec. 9.5.6)
|
Click letter for quick access: [Special Characters] A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
R
RAID 5
LSM (Sec. 10.1)
raw I/O (Sec. 9.3.6.2)
rc.config file (Sec. 1.2)
rc.config file (Sec. 5.1)
rc.config.common file (Sec. 1.2)
rc.config.site file (Sec. 1.2)
rcmgr command (Sec. 1.2)
rcmgr command (Sec. 5.1)
rcp command (Sec. 5.3)
read-ahead thread (Sec. 9.3.6.1)
reboot command (Sec. 5.4)
Redundant Array of Independent Disks
See RAID 5
registering CAA applications (Sec. 8.6)
relocating /tmp (Sec. 11.2.1)
relocating CAA applications (Sec. 8.3.1)
relocating CFS server (Sec. 9.3.3.7)
relocating member root domain (Sec. 9.3.3.4)
Remote Installation Services
See RIS
remove command (Sec. 5.15)
renaming cluster name or IP address (Sec. 5.11)
renaming the member name (Sec. 5.12)
rendezvous port (Sec. D.8.3)
repairing boot partition (Sec. 11.1.10)
resource
checking status of (Sec. 8.1)
resource name (Sec. 8.0)
restoring file systems (Sec. 9.8)
restoring standalone system from a cluster (Sec. 5.9)
/.rhosts file (Sec. 5.3)
RIP
aliasd support (Sec. 3.1)
RIS (Sec. 7.9)
setting default alias (Sec. 7.9)
rlogin command (Sec. 5.3)
troubleshooting (Sec. 11.1.13)
rmvol command
CFS warning message (Sec. 11.1.9.1)
clusters and (Sec. 9.5.5)
repeating on CFS server failover (Sec. 9.5.5)
requirement for cluster alias in /.rhosts (Sec. 9.5.5)
root file system (Sec. 1.2)
backing up clusterwide (Sec. 9.8)
relocating member (Sec. 9.3.3.4)
root mirroring (Sec. 10.1)
routed daemon
supported in a cluster (Sec. 3.1)
router priority attribute (Sec. 3.1)
routing
alias and virtual subnet (Sec. 3.5)
cluamgr and (Sec. 3.2)
gated (Sec. 1.2)
IP (Sec. 6.3)
Routing Information Protocol
See RIP
rsh command (Sec. 5.3)
run-time configuration variables
setting (Sec. 1.2)
runacct command (Sec. 5.15)
|
Click letter for quick access: [Special Characters] A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
S
sa command (Sec. 5.15)
/sbin/init.d/clu_alias script (Sec. 3.2)
Secure Shell
cluster alias selection weight and balancing connection requests among members (Sec. 3.10)
security (Sec. 1.2)
NIS configuration with enhanced security (Sec. 7.2.1)
selection priority attribute (Sec. 3.1)
selection weight attribute (Sec. 3.1)
applications that use two connections (Sec. 3.10)
sendmail file (Sec. 7.8.1)
server_only option to mount command (Sec. 9.3.8)
services
alias and network ports (Sec. 3.1)
shared file
memory mapping (Sec. 9.3.6.4)
showfsets command (Sec. 1.2)
stale information (Sec. 1.2)
shutacc command (Sec. 5.15)
shutdown (Sec. 5.5)
CAA applications and (Sec. 8.9)
member failure to shut down (Sec. 11.1.2)
single-user mode (Sec. 4.2.4)
stopping cluster shutdown (Sec. 5.4)
to single-user mode (Sec. 5.6)
shutdown -s command
restriction on use (Sec. 5.6)
shutdown command (Sec. 5.4)
shutting down accounting services (Sec. 5.15)
Simple Mail Transport Protocol
See SMTP
single-server device (Sec. 9.4.1)
single-user mode (Sec. 4.2.4)
single-user mode (Sec. 5.6)
shutting down to (Sec. 5.6)
site-wide configuration file
/etc/rc.config.site file (Sec. 1.2)
SMTP (Sec. 7.8)
software licenses (Sec. 5.13)
standalone system
restoring from a cluster (Sec. 5.9)
starting CAA applications (Sec. 8.4.1)
startup accounting services command (Sec. 5.15)
statd daemon (Sec. 7.6.1)
stopping CAA applications (Sec. 8.4.1)
storage
managing third-party devices (Sec. 9.2.3)
storage connectivity
AdvFS requirements (Sec. 9.5.7)
STP
problems when enabled on NetRAIN ports (Sec. D.8.1)
subnet
common (Sec. 3.3)
virtual (Sec. 3.13)
virtual (Sec. 3.3)
svrcfstok_max_percent kernel attribute (Sec. 9.3.6.3)
swap
configuring (Sec. 9.9)
member boot disk (Sec. 11.1.5)
synchronization of CFS cache data
df and showfsets command (Sec. 1.2)
df and showfsets command (Sec. 1.2)
SysMan
available interface options (Sec. 2.3)
sysman
-clone lack of support in clusters (Sec. 1.2)
SysMan command line (Sec. 2.3.3)
using in a cluster (Sec. 2.8)
SysMan Java Applet
using in a cluster (Sec. 2.6)
SysMan Java Applets
browser requirements (Sec. 2.6)
invoking (Sec. 2.6.1)
SysMan Menu (Sec. 2.3.1)
cluster alias configuration (Sec. 3.0)
focus considerations (Sec. 2.4.1)
invoking (Sec. 2.4.3)
invoking PC application (Sec. 2.7.1)
using in a cluster (Sec. 2.4)
SysMan Station (Sec. 2.3.2)
available actions based on type (Sec. 2.5)
example hardware view (Sec. 2.5)
example of Monitor window (Sec. 2.5)
invoking (Sec. 2.5.1)
using in a cluster (Sec. 2.5)
sysman_clone command
lack of support in clusters (Sec. 1.2)
system administration
cluster (Sec. 1.1)
|
Click letter for quick access: [Special Characters] A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
T
tape device (Sec. 9.2.5)
target state (Sec. 8.1)
telnet command
troubleshooting (Sec. 11.1.13)
time drift
managing NTP (Sec. 7.5.2.1)
time synchronization (Sec. 7.5)
/tmp file (Sec. 11.2.1)
tools for managing a cluster (Sec. 2.1)
See also HP Insight Manager
See also SysMan Menu
See also SysMan Station
tools for managing a cluster (Sec. 2.3.3)
available tools and interfaces (Sec. 2.1.4)
configuration report (Sec. 2.10)
configuration tools and interfaces (Sec. 2.2)
focus considerations for SysMan Menu (Sec. 2.4.1)
HP Insight Manager (Sec. 2.1.2)
HP Insight Manager (Sec. 2.9)
HP Insight Manager XE (Sec. 2.1.3)
invoking HP Insight Manager (Sec. 2.9.1)
invoking PC application (Sec. 2.7.1)
invoking SysMan Java applet (Sec. 2.6.1)
invoking SysMan Menu (Sec. 2.4.3)
invoking SysMan Station (Sec. 2.5.1)
options (Sec. 2.1)
PC application (Sec. 2.7)
quick start (Sec. 2.1.1)
SysMan application (Sec. 2.3)
SysMan command line (Sec. 2.3.3)
SysMan command-line interface (Sec. 2.8)
SysMan Java applets (Sec. 2.6)
SysMan Menu (Sec. 2.3.1)
SysMan Station (Sec. 2.3.2)
SysMan Station (Sec. 2.5)
using SysMan Menu in a cluster (Sec. 2.4)
troubleshooting
a cluster (Sec. 11.1)
tuning
port space (Sec. 3.11)
tuning CFS
direct I/O (Sec. 9.3.6.2)
gathering statistics (Sec. 9.3)
load balancing (Sec. 9.3.3)
performance considerations (Sec. 9.3.6)
read-ahead threads (Sec. 9.3.6.1)
strategies (Sec. 9.3.6.6)
write-behind threads (Sec. 9.3.6.1)
turnacct command (Sec. 5.15)
turning off accounting services (Sec. 5.15)
|
Click letter for quick access: [Special Characters] A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
U
UFS (Sec. 9.3.10)
cluster support (Sec. 9.3.7)
floppy disks and (Sec. 9.2.6)
read access support (Sec. 1.2)
UFS read/write file system support (Sec. 1.2)
write access support (Sec. 1.2)
UNIX File System
See UFS
UNIX-to-UNIX Copy Protocol
See UUCP
unsupported features (Sec. 1.2)
update
ifaccess.conf and changes to network interfaces (Sec. 6.1)
uptime lack of cluster-awareness (Sec. 1.2)
/usr file system
backing up clusterwide /usr (Sec. 9.8)
/usr/adm/sendmail/aliases file (Sec. 7.8.1)
/usr/adm/sendmail/sendmail.cf file (Sec. 7.8.1)
/usr/adm/sendmail/sendmail.st file (Sec. 7.8.1.1)
/usr/sbin/acct/holidays file (Sec. 5.15)
/usr/spool directory (Sec. 7.3)
/usr/spool/cron directory (Sec. 5.15)
/usr/spool/mail directory (Sec. 7.8.1)
UUCP (Sec. 7.8)
|
Click letter for quick access: [Special Characters] A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
V
/var
backing up (Sec. 9.8.1)
/var file system
backing up clusterwide /var (Sec. 9.8)
/var/adm/sendmail/protocols.map file (Sec. 7.8.1.1)
/var/spool/mqueue directory (Sec. 7.8.1)
verify command (Sec. 1.2)
verify command (Sec. 9.11)
virtual subnet
alias and (Sec. 3.5)
using same for more than one cluster (Sec. 3.13)
when to use (Sec. 3.3)
visible vote (Sec. 4.2.3)
vMAC (Sec. 3.12)
vmstat lack of cluster-awareness (Sec. 1.2)
/vmunix
CDSLs and (Sec. 9.1.3)
vm_page_free_min and vm_page_free_reserved attributes
restriction (Sec. 5.2)
voldisk list command
in a cluster (Sec. 10.1)
volmigrate command
cluster root and (Sec. 10.1)
volstat command
in a cluster (Sec. 10.1)
vote
current (Sec. 4.3)
expected (Sec. 4.2.2)
node (Sec. 4.2.4)
quorum (Sec. 4.3)
quorum disk (Sec. 4.2.5)
visible (Sec. 4.2.3)
|
Click letter for quick access: [Special Characters] A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
W
w command
lack of cluster-awareness (Sec. 1.2)
wall command (Sec. 1.2)
wall command (Sec. 1.2)
who command
lack of cluster-awareness (Sec. 1.2)
write-behind thread (Sec. 9.3.6.1)
wtmpfix command (Sec. 5.15)
|
Click letter for quick access: [Special Characters] A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
X
X Window application
displaying remotely (Sec. 7.10)
X.25 (Sec. 7.8)
xhost command
when to use the default cluster alias as the host name (Sec. 7.10)
|
Click letter for quick access: [Special Characters] A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
Y
Yellow Pages
See NIS