The parenthesized number on an index entry indicates the location of the entry within the book. Entries before the first numbered section in a chapter are identified as Sec. n.0.
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
A
AdvFS domain
backing up multiple volumes (Sec. 5.4.2.6)
encapsulating (Sec. 4.6.2)
migrating to LSM volume (Sec. 4.6.2.1)
moving from LSM volume to physical storage (Sec. 7.4)
placing under LSM control (Sec. 4.6.1)
removing from LSM control (Sec. 5.4.6)
unencapsulating (Sec. 5.4.6)
unmigrating (Sec. 7.4)
using LSM volume for storage (Sec. 4.5)
AdvFS file system
growing a volume (Sec. 5.4.8)
shrinking a volume (Sec. 5.4.9.2)
allvol.DF file
contents (Sec. 5.3.1)
automatic data relocation
See hot-sparing feature
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
B
BCL to DRL conversion (Sec. 7.1)
block device interface (LSM) (Sec. 3.6.2)
boot disk
encapsulating (Sec. 3.4)
failed (Sec. 6.4.5)
replacing failed (Sec. 6.4.5)
unencapsulating (Sec. 7.3.3)
bootable tape utility (Sec. 3.4.1)
bootdef_dev variable
resetting (Sec. 7.4)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
C
character device interface (LSM) (Sec. 3.6.2)
cluster
adding member with LSM volumes (Sec. 7.1.6)
encapsulating members' swap devices (Sec. 3.4.2.1.3)
planning for LSM (Sec. 2.1.5)
shared storage (Sec. 2.2)
unencapsulating members' swap devices (Sec. 7.5)
using volumes for clusterwide root (Sec. 3.4.1.4)
command line interpreter (Sec. 1.2)
commands (LSM) (Sec. 1.2.1)
troubleshooting (Sec. 6.2)
concatenated plex (Sec. 1.1.4)
creating (Sec. 4.3.1)
creating (Sec. 4.3.2)
concatenated volume
worksheet (Sec. 2.1.2)
configuration database
backing up (Sec. 5.3)
backing up before upgrading LSM (Sec. 7.1.1)
changing attributes (Sec. 5.3.2)
contents of backup (Sec. 5.3.1)
disk requirements for (Sec. 1.1.1.2)
displaying backups (Sec. 5.3.1)
managing (Sec. 5.2.7)
number of records stored (Sec. 1.1.2)
optimizing after upgrade (Sec. 7.1.5)
overview (Sec. 4.1)
restoring from backup (Sec. 5.3.1)
saving (Sec. 5.3)
connectivity guidelines (LSM) (Sec. 2.2.1)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
D
daemons (LSM) (Sec. 3.6.3)
data encapsulation (Sec. 4.5.2)
device drivers (LSM) (Sec. 3.6.2)
device interface (LSM) (Sec. 1.1.6.4)
device special files (LSM) (Sec. 3.6)
directories (LSM) (Sec. 3.6.1)
dirty region log
See DRL (dirty region log)
disk (Sec. 1.1)
See also nopriv disk
See also simple disk
See also sliced disk
See also hot-spare disk
adding to disk group (Sec. 5.2.1)
checking status (Sec. 6.4)
displaying information (Sec. 5.1)
displaying list of (Sec. 5.2)
encapsulating (Sec. 4.6)
evacuating (Sec. 5.1.4)
failed (Sec. 6.4.4)
failing (Sec. 6.4.3)
finding unused (Sec. 2.2.3)
initializing (Sec. 4.0)
initializing (Sec. 4.1.2)
initializing (Sec. 4.1.3)
managing (Sec. 5.0)
moving data off (Sec. 5.1.4)
moving volume off (Sec. 6.4.3)
placing off line (Sec. 5.1.2)
placing on line (Sec. 5.1.3)
removing from disk group (Sec. 5.2.2)
removing from LSM (Sec. 5.1.6)
renaming (Sec. 5.1.1)
replacing failed (Sec. 6.4.4)
temporary failure (Sec. 6.4.2)
troubleshooting (Sec. 6.3.3)
disk access name (Sec. 1.1.1)
disk configuration GUI (Sec. 2.3)
disk group
See also rootdg disk group
adding a disk (Sec. 4.2)
adding a disk (Sec. 5.2.1)
cloning (Sec. 5.2.6)
cluster considerations (Sec. 2.1.5)
converting from Version 4.0 (Sec. 7.1.4)
creating (Sec. 4.1.5)
creating (Sec. 4.2.1)
definition (Sec. 1.1.1.2)
deporting (Sec. 5.2.3)
deporting before upgrading LSM (Sec. 7.1.2)
displaying information (Sec. 5.2)
forced importing (Sec. 6.6.1)
free space (Sec. 5.2)
importing (Sec. 5.2.4)
managing (Sec. 5.1.7)
moving between systems (Sec. 7.2)
planning (Sec. 2.1.5)
removing a disk (Sec. 5.2.2)
renaming (Sec. 5.2.5)
setting number of configuration copies (Sec. 4.2.1)
troubleshooting (Sec. 6.5.6)
worksheet (Sec. 2.2.2)
worksheet examples (Sec. 2.2.2)
disk label
backing up (Sec. 4.1.4)
reusing (Sec. 6.4.5)
disk media name (Sec. 1.1.1.1)
associating to access name (Sec. 7.3.1)
disk partition
encapsulating (Sec. 4.6)
initializing (Sec. 4.1.3)
displaying information
configuration database backups (Sec. 5.3.1)
disk (Sec. 5.1)
disk group (Sec. 5.2)
plex (Sec. 5.5)
statistics (Sec. 6.1.1)
subdisk (Sec. 5.6)
system volumes (Sec. 3.4.1.3)
volume (Sec. 5.4)
volume status (Sec. 6.5.2.6)
domain
See AdvFS domain
DRL (dirty region log) (Sec. 1.1.5)
default size (Sec. 2.1)
minimum size (Sec. 2.1)
optimizing volume performance (Sec. 2.1.1)
planning (Sec. 2.1)
subdisk sizes (Sec. 2.1)
using nondefault size (Sec. 2.1.1)
dxlsm interface
See Visual Administrator interface
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
E
/etc/default/volassist file
See volassist file
/etc/fdmns directory
See fdmns directory
/etc/fstab file
See fstab file
/etc/sysconfigtab file
See sysconfigtab file
/etc/vol directory
See vol directory
event (LSM)
monitoring (Sec. 6.1)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
F
Fast Plex Attach feature
See FPA (Fast Plex Attach)
fdmns directory (Sec. 3.4.1.2)
fdmns directory (Sec. 7.4)
file system
See also AdvFS file system
See also UFS file system
configuring LSM volume for (Sec. 4.4.3)
encapsulating (Sec. 4.6)
growing a volume (Sec. 5.4.8)
shrinking a volume (Sec. 5.4.9.2)
FPA (Fast Plex Attach)
and rootvol (Sec. 6.5)
applicability (Sec. 5.4.2)
disabled by growing a volume (Sec. 5.4.9.1)
disabled by growing a volume (Sec. 5.4.9.2)
disabled by shrinking a volume (Sec. 5.4.10)
disabling (Sec. 5.4.6.1)
disabling (Sec. 5.5.5)
disabling (Sec. 5.5.6)
enabling (Sec. 5.4.2.1)
overview (Sec. 5.4.2)
restrictions (Sec. 5.4.2)
FPA log plex (Sec. 5.4.2.1)
adding (Sec. 5.5.3)
removing (Sec. 5.4.6.1)
FPA subdisk (Sec. 5.4.2.1)
attaching (Sec. 5.4.2.1)
fstab file (Sec. 3.4.1.2)
fstab file (Sec. 7.4)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
H
host ID
changing (Sec. 7.3)
clearing (Sec. 6.6)
in header file (Sec. 5.3.1)
in volboot file (Sec. 3.3)
mismatch (Sec. 6.6)
hot-spare disk (Sec. 3.4.3)
configuring (Sec. 3.5)
deconfiguring (Sec. 3.5)
hot-sparing feature
enabling (Sec. 3.4.3)
mail notification (Sec. 3.4.3)
mail notification examples (Sec. 3.5.1)
moving objects relocated by (Sec. 5.1.5)
overview (Sec. 3.4.3)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
I
I/O statistics (Sec. 6.1.1)
interfaces (LSM) (Sec. 1.1.6.5)
See also command line interpreter
See also Visual Administrator interface
See also voldiskadm menu interface
See also Storage Administrator
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
K
kernel states (Sec. 6.1.3.1)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
L
license (LSM) (Sec. 3.1)
log plex
See also DRL (dirty region log)
See also FPA log plex
See also RAID 5 log
adding (Sec. 5.5.2)
default size (Sec. 2.1)
default size (Sec. 2.1)
definition (Sec. 1.1.4.3)
minimum size (Sec. 2.1)
LSM
initialization restrictions (Sec. 2.3.2)
initializing (Sec. 3.0)
installing (Sec. 3.0)
overview (Sec. 1.0)
upgrading (Sec. 3.0)
upgrading from Version 4.0 (Sec. 7.0)
verifying initialization (Sec. 3.3)
lsmsa interface
See Storage Administrator
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
M
migrant plex (Sec. 5.4.2.1)
disabling FPA log, and (Sec. 5.4.6.1)
growing a volume, and (Sec. 5.4.9.1)
growing a volume, and (Sec. 5.4.9.2)
resynchronization (Sec. 5.4.2.1)
shrinking a volume, and (Sec. 5.4.10)
specifying (Sec. 5.4.2.2)
mirror
See plex
mirrored volume (Sec. 1.1.6.1)
recovering (Sec. 6.5.2)
recovering no valid plex (Sec. 6.5.2.2)
recovering one valid plex (Sec. 6.5.2.3)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
N
nonredundant volume
See also redundant volume
recovering (Sec. 6.5.2.1)
nopriv disk (Sec. 1.1.1)
configuration database and (Sec. 1.1.2)
moving between systems (Sec. 7.3.2)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
O
object hierarchy (LSM) (Sec. 1.0)
object states (LSM) (Sec. 6.1.2.2)
objects (LSM) (Sec. 1.0)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
P
phantom subdisk (Sec. 7.4)
plex
See also concatenated plex
See also striped plex
See also RAID 5 plex
See also log plex
See also DRL (dirty region log)
See also FPA (Fast Plex Attach)
See also RAID 5 log
See also migrant plex
See also log plex
See also FPA plex
adding (Sec. 5.5.1)
changing layout (Sec. 5.5.7)
definition (Sec. 1.1.3)
detaching (Sec. 5.5.4)
displaying information (Sec. 5.5)
dissociating (Sec. 5.5.5)
managing (Sec. 5.4.11)
reattaching (Sec. 5.5.6)
recovering no valid (Sec. 6.5.2.2)
recovering one valid (Sec. 6.5.2.3)
plex resynchronization
disabling for swap volumes (Sec. 4.3.7.1)
migrant plex, and (Sec. 5.4.2.1)
root volume (Sec. 3.4.1.3)
with DRL (Sec. 1.1.5)
with FPA (Sec. 1.1.5)
without DRL (Sec. 5.5.5)
without DRL (Sec. 5.5.6)
plex states (Sec. 6.1.3.2)
postinstallation tasks (Sec. 3.3)
primary swap space
encapsulating (Sec. 3.4)
primary volume (Sec. 5.4.2.1)
See also FPA (Fast Plex Attach)
private region (Sec. 1.1.1)
number of records stored (Sec. 1.1.2)
specifying offset (Sec. 4.1.1)
public region (Sec. 1.1.1)
specifying offset (Sec. 4.1.1)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
R
RAID 5 log (Sec. 1.1.5)
planning (Sec. 2.1.1)
recovering (Sec. 6.5.2.5)
size (Sec. 2.1.1)
RAID 5 plex (Sec. 1.1.4.2)
creating (Sec. 4.3.5.2)
default stripe width (Sec. 1.1.4.2)
using different buses (Sec. 4.4.2)
RAID 5 volume (Sec. 1.1.6.2)
recovering (Sec. 6.5.2)
recovering from multiple disk failures (Sec. 6.5.2.4)
worksheet (Sec. 2.1.4)
redundant volume (Sec. 1.1.6.1)
See also nonredundant volume
redundant volume (Sec. 1.1.6.2)
root file system
using LSM for (Sec. 3.4)
rootdg disk group (Sec. 1.1.2)
moving between systems (Sec. 7.3)
rootvol volume
and FPA (Sec. 6.5)
backup volume (Sec. 5.4.2.2)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
S
secondary swap space (Sec. 4.3.6)
secondary volume
See also FPA (Fast Plex Attach)
simple disk (Sec. 1.1.1)
simple disk (Sec. 4.1.3)
simple volume (Sec. 1.1.6)
sliced disk (Sec. 1.1.1)
sliced disk (Sec. 4.1.2)
software subsets (LSM) (Sec. 3.0)
stale subdisk
recovering (Sec. 6.4.1)
startup problems (Sec. 6.2)
states (LSM) (Sec. 6.1.3.1)
Storage Administrator (Sec. 1.2.1)
Storage Administrator (Sec. A.0)
access log file (Sec. B.1.1)
adding disk (Sec. A.3)
adding disk partition to a disk group (Sec. A.4.2)
adding disk to a disk group (Sec. A.4.1)
adding file system (Sec. A.6.4)
adding fileset to domain (Sec. A.7.2)
adding hot-spare disk (Sec. A.3.1)
adding log (Sec. A.6.2)
adding mirror (Sec. A.6.1)
adding volume to domain (Sec. A.7.1)
AdvFS (Sec. A.6.20)
Alert Monitor window (Sec. B.3.4.8)
analyzing activity (Sec. A.6.7)
changing fileset quotas (Sec. A.7.5)
checking file system (Sec. A.6.5)
clearing alerts (Sec. B.4.1)
cloning fileset (Sec. A.7.4)
closing (Sec. A.2.4)
command log file (Sec. B.1)
copying volume data (Sec. A.6.10)
creating disk group (Sec. A.4)
creating domain (Sec. A.7)
creating volume (Sec. A.6)
customizing (Sec. B.3.3)
defragmenting domain (Sec. A.7.3)
deporting disk group (Sec. A.4.3)
destroying disk group (Sec. A.4.8)
disabling mirror (Sec. A.6.8)
docking the Command Launcher (Sec. B.4.3)
docking the toolbar (Sec. B.4.3)
evacuating disk (Sec. A.3.2)
exiting (Sec. A.2.4)
importing disk group (Sec. A.4.4)
installing (Sec. A.1)
joining subdisks (Sec. A.5)
keyboard shortcuts (Sec. B.4.2)
main window (Sec. A.1.1)
main window (Sec. B.3)
managing disk groups (Sec. A.3.11)
managing disks (Sec. A.2.5)
managing subdisks (Sec. A.4.9)
managing volumes (Sec. A.5.4)
mapping volumes, disks, and subdisks (Sec. A.6.7)
mirroring disk (Sec. A.3.3)
mounting file system (Sec. A.6.3)
mounting fileset (Sec. A.7.8)
moving disk group (Sec. A.4.7)
moving subdisk (Sec. A.5.2)
Object Properties dialog box (Sec. B.3.2)
Object Search window (Sec. B.3.6)
Object Table Copy window (Sec. B.3.5)
overview (Sec. A.0)
placing disk off line (Sec. A.3.4)
placing disk on line (Sec. A.3.5)
pop-up menus (Sec. A.2.2)
recovering volumes (Sec. A.6.11)
recovering volumes in a disk group (Sec. A.4.5)
recovering volumes on a disk (Sec. A.3.6)
removing disk from disk group (Sec. A.3.7)
removing fileset (Sec. A.7.9)
removing log (Sec. A.6.14)
removing mirror (Sec. A.6.13)
removing subdisk (Sec. A.5.3)
removing volume (Sec. A.6.15)
renaming disk (Sec. A.3.8)
renaming disk group (Sec. A.4.6)
renaming fileset (Sec. A.7.7)
renaming volume (Sec. A.6.16)
repairing mirror (Sec. A.6.9)
replacing disk (Sec. A.3.9)
resizing volume (Sec. A.6.17)
restoring volume from backup (Sec. A.6.12)
right mouse button (Sec. A.2.2)
scanning for new disks (Sec. A.3.10)
selecting objects (Sec. A.2)
server log file (Sec. B.1.2)
shortcuts (Sec. B.3.8)
sorting objects (Sec. B.4)
specifying object sizes (Sec. B.2.1)
specifying objects (Sec. B.2)
splitting subdisk (Sec. A.5.1)
starting (Sec. A.1)
starting volume (Sec. A.6.18)
stopping volume (Sec. A.6.19)
Task Request Monitor window (Sec. B.3.7)
tracking activity (Sec. B.0)
unmounting file system (Sec. A.6.6)
unmounting fileset (Sec. A.7.6)
using Command Launcher (Sec. A.2.3)
using Console Menu (Sec. A.2.1)
using dialog boxes (Sec. B.1.3)
using Selected Menu (Sec. A.2.1)
using User Preferences dialog box (Sec. B.3.3)
viewing objects (Sec. B.2.2)
Volume Layout Details window (Sec. B.3.1)
stripe width (Sec. 2.1.1)
nondefault (Sec. 4.3.4)
nondefault (Sec. 4.3.5.2)
RAID 5 plex (Sec. 1.1.4.2)
specifying (Sec. 4.3.4)
specifying (Sec. 4.3.5.2)
striped plex (Sec. 1.1.4.1)
striped plex (Sec. 1.1.4.1)
creating (Sec. 4.3.3.2)
creating (Sec. 4.3.4)
default stripe width (Sec. 1.1.4.1)
using different buses (Sec. 4.4.1)
using different-size subdisks (Sec. 4.4)
striped volume
worksheet (Sec. 2.1.3)
subdisk
See also FPA subdisk
See also stale subdisk
See also phantom subdisk
creating (Sec. 4.4)
definition (Sec. 1.1.2)
displaying information (Sec. 5.6)
dissociating (Sec. 5.6.4)
joining (Sec. 5.6.1)
managing (Sec. 5.5.8.2)
moving to different disk (Sec. 5.6.3)
RAID 5 log size (Sec. 2.1.1)
removing (Sec. 5.6.4)
sizes for logging (Sec. 2.1)
splitting (Sec. 5.6.2)
stale (Sec. 6.4.1)
subdisk states (Sec. 6.1.3.2)
swap device
encapsulating
cluster member (Sec. 3.4.1.4)
cluster member (Sec. 3.4.2.1.3)
unencapsulating
cluster member (Sec. 7.5)
sysconfigtab file (Sec. 3.4.1.2)
sysconfigtab file (Sec. 7.4)
troubleshooting (Sec. 6.1.3.2)
system partitions
encapsulating (Sec. 3.4)
unencapsulating (Sec. 7.3.3)
system volumes
adding a mirror (Sec. 3.4.1.2)
converting to partitions (Sec. 7.3.3)
displaying (Sec. 3.4.1.3)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
U
UFS file system
See also troubleshooting
encapsulating (Sec. 4.6)
growing a volume (Sec. 5.4.8)
shrinking a volume (Sec. 5.4.9.2)
unencapsulating (Sec. 5.4.5)
using LSM volume for storage (Sec. 4.5.1)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
V
Version 4.0
upgrading (Sec. 7.0)
Visual Administrator interface (Sec. 1.2)
vol directory (Sec. 3.6.1)
volassist addfpa command (Sec. 5.5.3)
volassist addlog command (Sec. 5.5.2)
volassist command (Sec. 4.3.1)
volassist command (Sec. 4.3.2)
volassist command (Sec. 4.3.3.2)
volassist command (Sec. 4.3.4)
volassist command (Sec. 4.3.5.2)
volassist file (Sec. 4.3.1)
volassist maxsize command (Sec. 5.2)
volassist maxsize command (Sec. 6.5.4.1)
volassist mirror command (Sec. 5.5.1)
volassist move command (Sec. 5.1.4)
volassist move command (Sec. 5.1.5)
volassist move command (Sec. 6.4.3)
volassist snapback command (Sec. 5.4.2.1)
overview (Sec. 5.4.2)
volassist snapfast command (Sec. 5.4.2.1)
overview (Sec. 5.4.2)
volassist snapshot command (Sec. 5.4.2.2)
volassist snapstart command (Sec. 5.4.2.2)
volboot file (Sec. 3.3)
volclonedg command (Sec. 5.2.6)
vold command (Sec. 6.3)
vold command (Sec. 7.7)
vold daemon (Sec. 3.6.3)
checking (Sec. 6.3)
monitoring (Sec. 6.2)
restarting (Sec. 6.3.1)
voldctl command (Sec. 3.3)
voldctl command (Sec. 3.3)
voldctl command (Sec. 4.1)
voldctl command (Sec. 6.3)
voldctl command (Sec. 6.4.3)
voldctl command (Sec. 7.7)
voldg adddisk command (Sec. 5.2.1)
voldg deport command (Sec. 5.2.3)
voldg free command (Sec. 5.2)
voldg free command (Sec. 6.5.4.1)
voldg import command (Sec. 5.2.4)
voldg init command (Sec. 4.2.1)
voldg list command (Sec. 5.3.2)
voldg rmdisk command (Sec. 5.1.2)
voldg rmdisk command (Sec. 5.2.2)
voldisk check command (Sec. 6.4)
voldisk command (Sec. 2.3.2)
voldisk command (Sec. 5.1)
voldisk command (Sec. 5.1.6)
voldisk init command (Sec. 6.4.5)
voldisk list command (Sec. 5.2)
voldisk list command (Sec. 6.4)
voldisk moddb command (Sec. 7.1.5)
voldisk offline command (Sec. 5.1.2)
voldisk online command (Sec. 5.1.3)
voldisk rm command (Sec. 5.1.6)
voldiskadd script (Sec. 4.2)
voldiskadm menu interface (Sec. 1.2)
voldisksetup command (Sec. 4.0)
voldisksetup command (Sec. 6.4.5)
voledit command (Sec. 3.5)
voledit command (Sec. 5.1.1)
voledit command (Sec. 5.3.2)
voledit command (Sec. 5.4.10.2)
voledit command (Sec. 5.4.5)
voledit command (Sec. 5.4.7)
voledit command (Sec. 5.6.4)
volencap command (Sec. 3.4.1.1)
volencap command (Sec. 4.6)
volencap command (Sec. 4.6.2)
volevac command (Sec. 5.1.4)
volevac command (Sec. 5.1.5)
volinfo command (Sec. 6.5.2.1)
volinfo command (Sec. 6.5.2.6)
voliod daemon (Sec. 3.6.3)
checking (Sec. 6.3.2)
monitoring (Sec. 6.2)
setting number of (Sec. 6.3.2)
voliod utility (Sec. 3.3)
voliod utility (Sec. 3.6.4)
vollogcnvt utility (Sec. 7.1.4)
volmake command (Sec. 4.4.1)
volmake command (Sec. 4.4.2)
volmend command (Sec. 6.5.2.1)
volmend command (Sec. 6.5.2.2)
volmend command (Sec. 6.5.2.4)
volmend command (Sec. 6.5.2.4)
volmigrate command (Sec. 3.4.2)
volmigrate command (Sec. 4.6.2.1)
cluster root and (Sec. 3.4.2)
volplex command (Sec. 5.5.4)
volplex command (Sec. 5.5.5)
volplex command (Sec. 5.5.6)
volplex command (Sec. 6.5.2.5)
attach a plex (Sec. 5.4.2.4)
dissociate a plex (Sec. 5.4.2.4)
volprint command (Sec. 3.4.1.3)
volprint command (Sec. 5.4)
volprint command (Sec. 5.5)
volprint command (Sec. 5.5.3)
volprint command (Sec. 5.6)
volprint command (Sec. 6.1.2.2)
volprint command (Sec. 6.4)
volprint command (Sec. 6.5.3)
volprint command (Sec. 6.5.5)
volreconfig command (Sec. 3.4.1.1)
volreconfig command (Sec. 4.6)
volreconfig command (Sec. 4.6.2)
volrecover command (Sec. 5.5.6)
volrecover command (Sec. 6.5.2)
volrestore command (Sec. 5.3.1)
volrootmir command (Sec. 3.4.1.2)
volrootmir command (Sec. 6.4.6)
volsave command (Sec. 5.3)
volsave command (Sec. 7.1.1)
volsd command (Sec. 5.6.1)
volsd command (Sec. 5.6.2)
volsd command (Sec. 5.6.3)
volsd command (Sec. 5.6.4)
volsetup command (Sec. 3.2)
volstat command (Sec. 6.1.1)
volstat command (Sec. 6.1.2)
volstat command (Sec. 6.1.2.1)
volume
See also nonredundant volume
See also simple volume
See also mirrored volume
See also RAID 5 volume
See also redundant volume
See also volume attributes
See also root file system volume
See also system volume
See also volume attributes
adding cluster member with (Sec. 7.1.6)
backing up (Sec. 5.4.1)
block device interface (Sec. 1.1.6.4)
changing permissions (Sec. 5.4.10.2)
character device interface (Sec. 1.1.6.4)
checking resynchronization (Sec. 6.5.3)
clearing locks (Sec. 6.5.5)
cluster member swap space (Sec. 4.3.6)
creating (Sec. 4.2.2)
creating nondefault (Sec. 4.3.7.2)
definition (Sec. 1.1.5)
disabled (Sec. 6.5.2.6)
displaying information (Sec. 5.4)
displaying statistics (Sec. 6.1.1)
displaying status (Sec. 6.5.2.6)
encapsulating data to (Sec. 4.5.2)
growing (Sec. 5.4.8)
insufficient space to create (Sec. 6.5.4.1)
managing (Sec. 5.3.3.2)
maximum size (Sec. 5.2)
mirroring (Sec. 5.5.1)
moving off a disk (Sec. 5.1.4)
moving off a disk (Sec. 6.4.3)
planning (Sec. 2.0)
primary swap space (Sec. 3.4)
reattaching a plex (Sec. 5.5.6)
recovering (Sec. 6.4.6)
recovering (Sec. 6.5.1)
relationship to disk groups (Sec. 1.1.6)
removing (destroying) (Sec. 5.4.5)
renaming (Sec. 5.4.7)
restoring from backup (Sec. 5.4.2.7)
shrinking (Sec. 5.4.9.2)
specifying size (Sec. 4.3.1)
specifying the stripe width (Sec. 4.3.5.2)
starting (Sec. 5.4.3)
starting disabled (Sec. 6.5.2.6)
states (Sec. 6.1.3.2)
stopping (Sec. 5.4.4)
troubleshooting (Sec. 6.4.6)
usage types (Sec. 1.1.6.3)
volume attributes (Sec. 2.0)
volume attributes (Sec. 4.3.1)
defaults file (Sec. 4.3.1)
displaying defaults (Sec. 4.3)
order of precedence (Sec. 4.3)
volume command (Sec. 5.4.3)
volume command (Sec. 5.4.4)
volume kernel states (Sec. 6.1.3.1)
volume start command (Sec. 4.4.1)
volunroot command (Sec. 7.3.3)
volunroot command (Sec. 7.6)
volwatch command (Sec. 3.4.3)