The parenthesized number on an index entry indicates the location of the entry within the book. Entries before the first numbered section in a chapter are identified as Sec. n.0.
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
A
adding a volume (Sec. 2.3.4)
adding volumes (Sec. E.4.4.2)
addvol command (Sec. 2.3.4.1)
used accidentally (Sec. 6.3.8)
AdvFS GUI agent (Sec. E.2.1)
AdvFS Utilities
commands (Sec. B.2)
restoring license (Sec. 6.3.7)
AdvFS Utilities license
restoring AdvFS Utilities license (Sec. 6.3.7)
AdvfsAccessMaxPercent attribute (Sec. 5.7)
advfsd command (Sec. E.2.1)
AdvfsDomainPanicLevel attribute (Sec. 5.15)
AdvfsReadyQLim attribute (Sec. 5.7)
advfsstat command (Sec. 5.1)
AdvfsSyncMmapPages attribute (Sec. 5.7)
advscan command (Sec. 6.3.3.2)
allocation of storage (Sec. 1.5)
API
data management (Sec. D.0)
API for AdvFS (Sec. F.0)
asynchronous I/O (Sec. 5.5.1.1)
atomic-write data logging (Sec. 6.4.10)
and memory mapping, direct I/O (Sec. 6.4.10)
asynchronous (Sec. 5.5.2.1)
description (Sec. 5.5.2)
persistent (Sec. 5.5.2.3)
synchronous (Sec. 5.5.2.2)
temporary (Sec. 5.5.2.4)
turning on and off (Sec. 5.5.2.5)
attributes
changing (Sec. 5.7)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
B
backup
compressing (Sec. 4.3.8)
creating source (Sec. 4.2)
data integrity (Sec. 4.1)
error protection (Sec. 4.3.9)
fileset (Sec. 4.0)
from mounted fileset (Sec. 4.2.1)
incremental (Sec. 4.3.3)
level (Sec. 4.3.3)
methods of (Sec. 4.3)
remote (Sec. 4.3.12)
subdirectories (Sec. 4.3.6)
to files (Sec. 4.3.7)
to standard output (Sec. 4.3.5)
to tape (Sec. 4.3.4)
using controller-based clone (Sec. 4.2.4)
using controller-based snapshot (Sec. 4.2.5)
using fileset clone (Sec. 4.2.2)
using LSM split mirror (Sec. 4.2.3)
with trashcan (Sec. 2.6)
balance command (Sec. 5.11)
balancing domains (Sec. 5.11)
balancing domains (Sec. E.4.5.1)
bitfile metadata table
See BMT
bitmap
storage (Sec. 1.4.2)
BMT (Sec. 1.4.2)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
C
cache tuning (Sec. 5.4)
chfile command (Sec. 4.1.1.3)
chfile command (Sec. 5.5.1.3)
chfile command (Sec. 5.5.2)
chfsets command (Sec. 2.4.9)
chfsets command (Sec. 3.3.2)
chfsets command (Sec. 3.3.4)
chfsets command (Sec. 3.3.5)
chfsets command (Sec. 6.4.11)
chvol command (Sec. 2.2.1)
chvol command (Sec. 5.7)
chvol command (Sec. 6.4.14)
clone, fileset
backing up (Sec. 4.2.2)
creating (Sec. 2.4.10.1)
creating (Sec. E.4.3.1)
deleting (Sec. 2.4.10.3)
deleting (Sec. E.4.3.4)
mounting (Sec. 2.4.10.2)
mounting (Sec. E.4.3.2)
removing (Sec. 2.4.10.3)
removing (Sec. E.4.3.4)
renaming (Sec. 2.4.10.4)
unmounting (Sec. 2.4.10.2)
unmounting (Sec. E.4.3.3)
clonefset command (Sec. 2.4.10.1)
Collect (Sec. 5.1)
commands
AdvFS base (Sec. B.1)
AdvFS Utilities (Sec. B.2)
UFS comparison (Sec. B.3)
compressing savesets (Sec. 4.3.8)
configuring
AdvFS root (Sec. 2.5)
file system (Sec. 1.4)
converting
AdvFS to UFS
fileset (Sec. C.4.2)
root (Sec. C.4.1)
UFS to AdvFS
data (Sec. C.3)
root file system (Sec. C.2)
/usr file system (Sec. C.1)
copy-on-write (Sec. 2.4.10)
corruption
due to old utilities (Sec. 6.4.7)
fixing metadata (Sec. 6.2.5)
fixing root domain (Sec. 6.3.4)
hardware (Sec. 6.3.5)
crash recovery (Sec. 6.2)
creating
domain (Sec. 2.3.3)
domain (Sec. E.4.1)
fileset (Sec. 2.4.3)
fileset (Sec. E.4.2.1)
fileset clone (Sec. 2.4.10.1)
fileset clone (Sec. E.4.3.1)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
D
data
logging (Sec. 5.5)
logging (Sec. 6.4.10)
management API (Sec. D.0)
restoring remotely (Sec. 4.3.12)
restoring with vrestore (Sec. 4.3.13)
reusing (Sec. 6.4.11)
security (Sec. 6.4.11)
data cache tuning (Sec. 5.4)
Data Management API (Sec. D.0)
defragment command (Sec. 5.9)
defragmenting (Sec. 5.9)
defragmenting (Sec. E.4.5.2)
file (Sec. 5.10)
with vfast (Sec. 5.8)
deleting
domain (Sec. 2.3.6)
domain (Sec. E.4.1.4)
fileset (Sec. 2.4.7)
fileset (Sec. E.4.2.6)
fileset clone (Sec. 2.4.10.3)
fileset clone (Sec. E.4.3.4)
fileset quotas (Sec. 3.3.5)
user and group quotas (Sec. 3.2.6)
device
See volume
devices and volumes window (Sec. E.3.3)
df command (Sec. 3.4.2.1)
df command (Sec. 6.4.1)
direct I/O (Sec. 5.6)
direct I/O (Sec. 6.4.10)
disk
See also volume
bad usage information (Sec. 6.4.1)
damaged (Sec. 6.3.6)
dumping to a partition (Sec. 4.3.7)
failure recovery (Sec. 6.3.5)
moving (Sec. 6.3.6)
removing (Sec. 6.4.3)
space used (Sec. 3.4.1)
space used (Sec. 6.4.1)
space used (Sec. 6.4.4)
version incompatibility (Sec. 6.4.6)
disks.ignore file (Sec. E.2.2.2)
displaying
domain information (Sec. 2.3.2)
file information (Sec. 5.12)
space used (Sec. 3.4.1)
space used (Sec. 6.4.1)
DMAPI (Sec. D.0)
domain
adding a volume (Sec. 2.3.4)
adding volumes (Sec. E.4.1.3)
balancing (Sec. 5.11)
balancing (Sec. E.4.5.1)
corrupted root (Sec. 6.3.4)
creating (Sec. 2.3.3)
creating (Sec. E.4.1)
creating DVN3 (Sec. 2.3.3.3)
creating DVN4 (Sec. 2.3.3.2)
damaged (Sec. 6.2.5)
defragmenting (Sec. 5.9)
defragmenting (Sec. E.4.5.2)
deleting (Sec. 2.3.6)
deleting (Sec. E.4.1.4)
description (Sec. 1.3.1)
disks of (Sec. 6.3.3.2)
enlarging (Sec. 2.3.4)
enlarging (Sec. E.4.1.3)
incompatibility (Sec. 6.4.6)
naming (Sec. 2.3)
panic (Sec. 6.3.1)
quiescing (Sec. 4.1.2.1)
recovering (Sec. 6.2)
recovering file data (Sec. 6.2.6)
recovering multivolume (Sec. 6.3.7)
reducing size (Sec. 2.3.5)
removing (Sec. 2.3.6)
removing (Sec. E.4.1.4)
removing volumes (Sec. 2.3.5)
renaming (Sec. 2.3.7)
renaming (Sec. E.4.1.5)
renaming root (Sec. 2.5.2)
repairing (Sec. 6.3.3.2)
root (Sec. 2.5)
security (Sec. 2.3.6)
security (Sec. E.4.1.4)
setting free space alert (Sec. E.4.1.2)
space usage (Sec. 6.4.1)
striping (Sec. 5.13)
upgrading to DVN4 (Sec. 2.3.3.4)
Version 5 (Sec. 2.3.3.1)
domain panic (Sec. 6.3.1)
domain version number (Sec. 2.3.3.1)
dtadvfs command (Sec. E.2.2)
du command (Sec. 6.4.1)
dumping
error protection (Sec. 4.3.9)
incremental (Sec. 4.3.3)
remote (Sec. 4.3.12)
subdirectories (Sec. 4.3.6)
to a disk partition (Sec. 4.3.7)
to a file (Sec. 4.3.7)
to standard output (Sec. 4.3.5)
to tape (Sec. 4.3.4)
DVN
See domain version number
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
E
edquota command (Sec. 3.2.2)
edquota command (Sec. 3.2.3)
enlarging
domain (Sec. 2.3.4)
domain (Sec. E.4.1.3)
root (Sec. 6.4.9)
/etc/fdmns directory
description (Sec. 2.3.1)
restoring (Sec. 6.3.3)
/etc/fstab file
designating filesets (Sec. 2.4.1)
quotas (Sec. 3.2.1)
quotas (Sec. 3.2.4)
extent (Sec. 1.3.3)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
F
fdmns directory (Sec. 2.3.1)
file
defragmenting (Sec. 5.10)
defragmenting with vfast (Sec. 5.8)
deleting with trashcan (Sec. 2.6)
disks.ignore (Sec. E.2.2.2)
extent (Sec. 1.3.3)
frag (Sec. 1.3.3)
frag (Sec. 5.2)
GUI log (Sec. E.2.2.3)
gui.passwd (Sec. E.2.2.1)
hosts.allow (Sec. E.2.2.1)
moving (Sec. 5.14)
preallocation (Sec. 1.3.3)
quota (Sec. 3.2.1)
quota (Sec. 3.3.1)
recovering (Sec. 6.1)
restoring remotely (Sec. 4.3.12)
restoring with vrestore (Sec. 4.3.14)
sparse (Sec. 1.3.3)
storage allocation (Sec. 1.3.3)
striping (Sec. 5.13)
file quotas
See quotas
file system
AdvFS root (Sec. 2.5)
configuring (Sec. 1.4)
converting AdvFS to UFS (Sec. C.4)
converting UFS to AdvFS
file system (Sec. C.3)
root (Sec. C.2)
/usr (Sec. C.1)
design (Sec. 1.3)
monitoring remotely with GUI (Sec. E.2.2.5)
recovering (Sec. 6.2)
verifying (Sec. 6.2.4)
viewing with GUI (Sec. E.3)
fileset
backing up (Sec. 4.0)
backup using fileset clone (Sec. 4.2.2)
changing characteristics (Sec. 2.4.9)
cloning
See clone, fileset
converting AdvFS to UFS (Sec. C.4.2)
creating (Sec. 2.4.3)
creating (Sec. E.4.2.1)
deactivating quotas (Sec. 3.3.5)
deleting (Sec. 2.4.7)
deleting (Sec. E.4.2.6)
description (Sec. 1.3.1)
disk usage (Sec. 6.4.1)
displaying information (Sec. 2.4.2)
grace period (Sec. 3.3.2)
mounted read-only (Sec. 6.3.2)
mounting (Sec. 2.4.5)
mounting (Sec. E.4.2.2)
moving (Sec. 5.14)
naming conventions (Sec. 2.4)
object safety (Sec. 6.4.11)
quotas (Sec. 3.3)
quotas (Sec. E.4.2.5)
read-only recovery (Sec. 6.3.2)
removing (Sec. 2.4.7)
removing (Sec. E.4.2.6)
renaming (Sec. 2.4.8)
renaming (Sec. E.4.2.7)
renaming root (Sec. 2.5.3)
security (Sec. 2.4.7)
security (Sec. 6.4.11)
security (Sec. E.4.2.6)
setting free space alert (Sec. E.4.2.4)
space usage (Sec. 6.4.1)
unmounting (Sec. 2.4.6)
unmounting (Sec. E.4.2.3)
upgrading (Sec. 2.4.4)
fixfdmn command (Sec. 6.2.5)
frag file (Sec. 5.2)
fragments (Sec. 1.3.3)
fragments (Sec. 5.2)
free space alert (Sec. E.3.1)
domain (Sec. E.4.1.2)
fileset (Sec. E.4.2.4)
volume (Sec. E.4.4.1)
freezefs command (Sec. 4.1.2.1)
fstab file (Sec. 2.4.1)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
G
grace period
definition (Sec. 3.1.2)
setting
fileset (Sec. 3.3.2.2)
user and group (Sec. 3.2.2)
turning off (Sec. 3.1.2)
graphical user interface
See GUI
group quotas (Sec. 3.2)
growing a domain (Sec. E.4.1.3)
GUI
agent (Sec. E.2.1)
allowed hosts (Sec. E.2.2.1)
and LSM volumes (Sec. E.2.2.6)
devices and volumes window (Sec. E.3.3)
display units (Sec. E.3.1)
domain
adding volumes (Sec. E.4.1.3)
balancing (Sec. E.4.5.1)
creating (Sec. E.4.1)
defragmenting (Sec. E.4.5.2)
deleting (Sec. E.4.1.4)
enlarging (Sec. E.4.1.3)
free space alert (Sec. E.4.1.2)
removing (Sec. E.4.1.4)
renaming (Sec. E.4.1.5)
fileset
creating (Sec. E.4.2.1)
deleting (Sec. E.4.2.6)
free space alert (Sec. E.4.2.4)
mounting (Sec. E.4.2.2)
removing (Sec. E.4.2.6)
renaming (Sec. E.4.2.7)
setting quotas (Sec. E.4.2.5)
unmounting (Sec. E.4.2.3)
fileset clone
creating (Sec. E.4.3.1)
deleting (Sec. E.4.3.4)
mounting (Sec. E.4.3.2)
removing (Sec. E.4.3.4)
unmounting (Sec. E.4.3.3)
ignoring disks (Sec. E.2.2.2)
installation (Sec. E.1)
log files (Sec. E.2.2.3)
main window (Sec. E.3.2)
monitoring remote file systems (Sec. E.2.2.5)
password file (Sec. E.2.2.1)
security (Sec. E.2.2.1)
software subsets (Sec. E.1)
troubleshooting (Sec. E.5)
volume
adding (Sec. E.4.4.2)
removing (Sec. E.4.4.3)
setting free space alert (Sec. E.4.4.1)
gui.passwd file (Sec. E.2.2.1)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
H
hard limit (Sec. 3.1.1)
hosts.allow file (Sec. E.2.2.1)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
I
I/O
asynchronous (Sec. 5.5.1.1)
atomic-write (Sec. 5.5.2)
atomic-write (Sec. 6.4.10)
direct (Sec. 5.6)
direct (Sec. 6.4.10)
synchronous (Sec. 5.5.1.2)
installation
AdvFS GUI (Sec. E.1)
upgrade (Sec. 6.4.6)
iostat command (Sec. 5.1)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
L
license
restoring (Sec. 6.3.7)
limits
exceeding quota (Sec. 6.4.5)
quota (Sec. 3.1.1)
log
transaction
See transaction log file
logging (Sec. 5.5.2)
ls command (Sec. 3.2.1)
ls command (Sec. 6.4.1)
LSM Storage Administrator (Sec. E.0)
LSMSA (Sec. E.0)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
M
memory mapping (Sec. 6.4.10)
metadata
backing up (Sec. 4.1)
consistency (Sec. 4.1.2)
description (Sec. 1.4.2)
fixing corruption (Sec. 6.2.5)
saving (Sec. 6.2.2)
migrate command (Sec. 5.12)
migrating files (Sec. 5.12)
mkfdmn command (Sec. 2.3.3)
used accidentally (Sec. 6.3.8)
mkfset command (Sec. 2.4.3)
mktrashcan command (Sec. 2.6)
mount command (Sec. 2.4.5)
mounting
fileset (Sec. 2.4.5)
fileset (Sec. E.4.2.2)
fileset clone (Sec. 2.4.10.2)
fileset clone (Sec. E.4.3.2)
mountlist command (Sec. B.1)
moving
between AdvFS and UFS (Sec. C.0)
disk (Sec. 6.3.6)
files (Sec. 5.14)
filesets (Sec. 5.14)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
N
naming
domains (Sec. 2.3)
filesets (Sec. 2.4)
ncheck command (Sec. 3.4.1.1)
nvbmtpg command (Sec. B.1)
nvfragpg command (Sec. B.1)
nvlogpg command (Sec. B.1)
nvtagpg command (Sec. B.1)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
P
page
zero-fill (Sec. 2.4.9)
panic
domain (Sec. 6.3.1)
partition
finding AdvFS (Sec. 6.3.3.2)
reusing (Sec. 6.4.2)
performance
improving (Sec. 6.4.13)
improving by changing attributes (Sec. 5.7)
improving by disabling frag file (Sec. 5.2)
improving transaction log file (Sec. 5.3)
monitoring (Sec. 5.1)
with vfast (Sec. 5.8)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
Q
quiescing a domain (Sec. 4.1.2.1)
quot command (Sec. 3.4.1.2)
quota command (Sec. 3.4.1.3)
quotacheck command (Sec. 3.4.1.4)
quotaoff command (Sec. 3.2.5)
quotaoff command (Sec. 3.2.6)
quotaon command (Sec. 3.2.1)
quotaon command (Sec. 3.2.2)
quotaon command (Sec. 3.2.5)
quotas (Sec. 3.0)
activating fileset (Sec. 3.3.4)
activating user and group
at start-up (Sec. 3.2.4)
manually (Sec. 3.2.5)
changing GUI view (Sec. E.3.2)
checking disk usage (Sec. 3.4.1)
checking fileset ownership (Sec. 3.4.1.2)
comparing types (Sec. 3.1.3)
deactivating fileset (Sec. 3.3.5)
deactivating user and group (Sec. 3.2.6)
deleting fileset (Sec. 3.3.5)
deleting user and group (Sec. 3.2.6)
disabling fileset (Sec. 3.3.5)
disabling user and group (Sec. 3.2.6)
displaying disk usage (Sec. 3.4.1.3)
enabling fileset (Sec. 3.3.4)
enabling user and group
at start-up (Sec. 3.2.4)
manually (Sec. 3.2.5)
/etc/fstab file (Sec. 2.4.1)
/etc/fstab file (Sec. 3.2.1)
/etc/fstab file (Sec. 3.2.4)
exceeding limits (Sec. 6.4.5)
file (Sec. 3.3.1)
file size (Sec. 3.2.1)
fileset (Sec. 3.3)
fileset (Sec. E.3.2)
fileset (Sec. E.4.2.5)
grace period (Sec. 3.1.2)
group (Sec. 3.2)
hard limit (Sec. 3.1.1)
limits (Sec. 3.1.1)
multiple filesets (Sec. 3.3.3)
multiple users and groups (Sec. 3.2.3)
relocating files (Sec. 2.4.1)
removing fileset (Sec. 3.3.5)
removing user and group (Sec. 3.2.6)
restoring (Sec. 4.3.15)
setting
fileset (Sec. 3.3.2)
fileset (Sec. E.4.2.5)
multiple filesets (Sec. 3.3.3)
multiple users and groups (Sec. 3.2.3)
user and group (Sec. 3.2.2)
soft limit (Sec. 3.1.1)
starting fileset (Sec. 3.3.4)
starting user and group
at start-up (Sec. 3.2.4)
manually (Sec. 3.2.5)
summarizing by fileset (Sec. 3.4.1.5)
turning off fileset (Sec. 3.3.5)
turning off user and group (Sec. 3.2.6)
user and group (Sec. 3.2.2)
users (Sec. 3.2)
viewing with GUI (Sec. E.3.2)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
R
read-only fileset (Sec. 6.3.2)
recovering
domain (Sec. 6.2)
file data (Sec. 6.2.6)
files from trashcan (Sec. 2.6)
fileset mounted read-only (Sec. 6.3.2)
from mkfdmn or addvol (Sec. 6.3.8)
multivolume domain (Sec. 6.3.7)
root domain (Sec. 6.3.4)
system crash (Sec. 6.2)
refresh interval (Sec. E.2.2)
removing
bad disk (Sec. 6.4.3)
domain (Sec. 2.3.6)
domain (Sec. E.4.1.4)
fileset (Sec. 2.4.7)
fileset (Sec. E.4.2.6)
fileset clone (Sec. 2.4.10.3)
fileset clone (Sec. E.4.3.4)
fileset quotas (Sec. 3.3.5)
user and group quotas (Sec. 3.2.6)
volume (Sec. 2.3.5)
volume (Sec. E.4.4.3)
renamefset command (Sec. 2.4.8)
renaming
domain (Sec. 2.3.7)
domain (Sec. E.4.1.5)
fileset (Sec. 2.4.8)
fileset (Sec. E.4.2.7)
fileset clone (Sec. 2.4.10.4)
repairing
domain (Sec. 6.3.3.2)
repquota command (Sec. 3.4.1.5)
restoring
AdvFS Utilities license (Sec. 6.3.7)
data (Sec. 4.3.13)
/etc/fdmns directory (Sec. 6.3.3)
files with vrestore (Sec. 4.3.14)
quotas (Sec. 4.3.15)
remote (Sec. 4.3.12)
saveset (Sec. 4.3.16)
rmfdmn command (Sec. 2.3.6)
rmfset command (Sec. 2.4.7)
rmtrashcan command (Sec. 2.6)
rmvol command (Sec. 2.3.5)
root
converting AdvFS to UFS (Sec. C.4.1)
domain (Sec. 2.5)
file system (Sec. 2.5)
fixing corruption (Sec. 6.3.4)
increasing size (Sec. 6.4.9)
mounting in single-user mode (Sec. 2.5.1)
recovering (Sec. 6.3.4)
renaming (Sec. 2.5.2)
renaming (Sec. 2.5.3)
salvaging data from (Sec. 6.2.6.2)
rvdump command (Sec. 4.3.12)
rvrestore command (Sec. 4.3.13)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
S
salvage command (Sec. 6.2.6)
savemeta command (Sec. 6.2.2)
saveset
bad (Sec. 6.4.12)
compressing (Sec. 4.3.8)
restoring (Sec. 4.3.16)
security
data (Sec. 6.4.11)
domain (Sec. 2.3.6)
domain (Sec. 6.4.11)
domain (Sec. E.4.1.4)
fileset (Sec. 2.4.7)
fileset (Sec. E.4.2.6)
shblk command (Sec. B.1)
shfragbf command (Sec. B.1)
showfdmn command (Sec. 3.4.2.3)
showfdmn command (Sec. 6.4.1)
showfdmn command (Sec. 6.4.1)
showfile command (Sec. 1.4.1)
showfile command (Sec. 5.12)
showfile command (Sec. 6.4.1)
showfsets command (Sec. 2.4.2)
showfsets command (Sec. 3.4.2.2)
showfsets command (Sec. 6.4.1)
shtrashcan command (Sec. 2.6)
size
increase root (Sec. 6.4.9)
quota files (Sec. 3.2.1)
space usage (Sec. 6.4.1)
smoothsync_age attribute (Sec. 5.7)
soft limit (Sec. 3.1.1)
space
corrupt disk usage output (Sec. 6.4.1)
disk usage (Sec. 6.4.1)
sparse file (Sec. 1.3.3)
storage
bitmap (Sec. 1.4.2)
choosing (Sec. 1.5)
stripe command (Sec. 5.13)
striping files (Sec. 5.13)
switchlog command (Sec. 5.3)
synchronous I/O (Sec. 5.5.1.2)
SysMan Menu (Sec. A.0)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
T
tag (Sec. 3.4.1.1)
tag2name command (Sec. B.1)
thawfs command (Sec. 4.1.2.1)
transaction log file
data logging (Sec. 5.5)
description (Sec. 1.3.2)
improving performance (Sec. 5.3)
incompatibility (Sec. 6.4.8)
isolating (Sec. 5.3)
trashcan (Sec. 2.6)
tuning
attributes (Sec. 5.7)
data cache (Sec. 5.4)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
U
UBC (Sec. 5.4)
UFS
AdvFS command comparison (Sec. B.3)
converting AdvFS to (Sec. C.4)
converting fileset to (Sec. C.4.2)
umount command (Sec. 2.4.6)
unmounting
fileset (Sec. 2.4.6)
fileset (Sec. E.4.2.3)
fileset clone (Sec. 2.4.10.2)
fileset clone (Sec. E.4.3.3)
upgrading
fileset (Sec. 2.4.4)
installation (Sec. 6.4.7)
usage
domain (Sec. 3.4.1)
domain (Sec. 6.4.1)
file (Sec. 6.4.1)
fileset (Sec. 6.4.1)
user quotas (Sec. 3.2)
/usr file system
converting UFS to AdvFS (Sec. C.1)
utility incompatibility (Sec. 6.4.7)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
V
vdf command (Sec. 3.4.2.4)
vdf command (Sec. 6.4.1)
vdump command (Sec. 4.3.1)
verify command (Sec. 6.2.4)
version number, domain (Sec. 2.3.3.1)
vfast command (Sec. 5.8)
vfilepg command (Sec. B.1)
viewing
domain (Sec. 2.3.2)
file (Sec. 5.12)
volume (Sec. 2.2)
activating (Sec. 6.4.14)
adding (Sec. 2.3.4)
adding (Sec. E.4.4.2)
attributes (Sec. 2.2.1)
changing (Sec. 5.14)
deleting (Sec. 2.3.5)
deleting (Sec. E.4.4.3)
description (Sec. 1.3.1)
exchanging (Sec. 2.3.4.2)
increasing size (Sec. 2.3.4.3)
removing (Sec. 2.3.5)
removing (Sec. E.4.4.3)
reusing (Sec. 6.4.2)
setting free space alert (Sec. E.4.4.1)
vrestore command (Sec. 4.3.13)
vsbmpg command (Sec. B.1)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
Z
zero-fill pages (Sec. 6.4.11)