The parenthesized number on an index entry indicates the location of the entry within the book. Entries before the first numbered section in a chapter are identified as Sec. n.0.
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
A
ac command (Sec. 10.4.4)
account
adding automatically (Sec. 7.4)
adding manually (Sec. 7.5)
configuring (Sec. 1.5.2.2)
defaults (Sec. 7.3.3)
directory (Sec. 7.3.3)
dxaccounts utility (Sec. 7.4.2)
e-mail (Sec. 1.5.2.2)
enhanced security (Sec. 7.1.2)
gecos (Sec. 7.3.3)
GID (Sec. 7.3.4)
group file (Sec. 7.3.4)
LDAP (Sec. 7.1.2)
lock file (Sec. 7.1.2)
modifying user account information (Sec. 7.1.4)
NIS (Sec. 7.1.2)
NIS files (Sec. 7.3.1)
password file (Sec. 7.3.1)
password file (Sec. 7.3.3)
quotas (Sec. 7.1.4)
shell (Sec. 7.3.3)
UID (Sec. 7.3.3)
utilities and commands (Sec. 7.1.4)
Windows 2000 Single Sign-On (Sec. 7.6.2)
account administration (Sec. 7.0)
account administration (Sec. 7.3)
ASU (Sec. 7.2.5)
command line utilities (Sec. 7.2.4)
during system setup (Sec. 7.2)
GID (Sec. 7.3.4)
group file (Sec. 7.3)
passwd file (Sec. 7.3)
quick start (Sec. 7.2)
security (Sec. 7.3)
skeleton files (Sec. 7.3.1)
SysMan Menu (Sec. 7.2.3)
SysMan Menu (Sec. A.2.1)
system files (Sec. 7.3.1)
user accounts (Sec. 7.4)
Account Manager
See dxaccounts GUI
accounting (Sec. 10.1)
automatic (Sec. 10.2.4)
commands
See accounting commands
connect session (Sec. 10.4)
daily reports (Sec. 10.1.2)
disk samples (Sec. 10.9.2)
disk usage (Sec. 10.6)
error messages (Sec. 10.9.1.2)
files
See accounting files
monthly reports (Sec. 10.1.2)
printer (Sec. 10.2)
process (Sec. 10.5)
rc.config file (Sec. 10.2.1)
service charges (Sec. 10.7)
setting up (Sec. 10.2)
starting and stopping (Sec. 10.2.4)
submitting commands to cron (Sec. 10.2.4)
turning on and off (Sec. 10.4.5)
using the crontab command (Sec. 10.2.4)
utmp file structure (Sec. 10.4)
accounting commands
ac (Sec. 10.4.4)
acctcms (Sec. 10.5.6)
acctcom (Sec. 10.5.4)
acctcon1 (Sec. 10.4.5)
acctdisk (Sec. 10.6.4)
acctdusg (Sec. 10.6.3)
acctmerg (Sec. 10.9.2)
accton (Sec. 10.5.1)
acctprc1 (Sec. 10.5.7)
acctprc2 (Sec. 10.5.8)
acctwtmp (Sec. 10.4.3)
ckpacct (Sec. 10.5.3)
diskusg (Sec. 10.6.2)
dodisk (Sec. 10.6.1)
fwtmp (Sec. 10.4.2)
last (Sec. 10.4.9)
lastcomm (Sec. 10.5.9)
lastlogin (Sec. 10.4.8)
list of (Sec. 10.1.1)
prctmp (Sec. 10.4.7)
prdaily (Sec. 10.9.4)
prtacct (Sec. 10.9.3)
runacct (Sec. 10.9.1)
sa (Sec. 10.5.5)
shutacct (Sec. 10.3)
startup (Sec. 10.3)
turnacct (Sec. 10.5.2)
wtmpfix (Sec. 10.4.1)
accounting files
adm (Sec. 10.2.4)
administrative files (Sec. 10.1.2)
daily (Sec. 10.1.2)
database files (Sec. 10.1.2)
extraneous files (Sec. 10.1.2)
holidays (Sec. 10.2.3)
monthly (Sec. 10.1.2)
printer use (Sec. 10.8)
root file (Sec. 10.2.4)
acctcms command (Sec. 10.5.6)
acctcom command (Sec. 10.5.4)
acctcon1 command (Sec. 10.4.5)
acctdisk command (Sec. 10.6.4)
acctdusg command (Sec. 10.6.3)
acctmerg command (Sec. 10.9.2)
accton command (Sec. 10.5.1)
acctprc1 command (Sec. 10.5.7)
acctprc2 command (Sec. 10.5.8)
acctwtmp command (Sec. 10.4.3)
address space (Sec. 3.6.5)
adduser utility (Sec. 7.4)
adduser utility (Sec. 7.5)
administering from a PC (Sec. 1.6)
administration utilities (Sec. A.0)
AdvFS file system (Sec. 5.2.1)
AdvFS file system (Sec. 6.1)
AdvFS file system
creating with diskconfig GUI (Sec. 5.1)
dismounting domains (Sec. 6.4.2)
displaying mounted domains (Sec. 6.4.3)
domain name (Sec. 6.4.2)
graphical user interfaces (Sec. 6.4)
utilities (Sec. 6.4.1)
utilities (Sec. A.2.9)
Application Manager (Sec. 1.4)
Application Manager (Sec. 1.5)
Application Manager (Sec. 1.6)
shut down (Sec. 2.1.1)
Storage_Management folder (Sec. 6.4)
system monitoring tools (Sec. 11.1.2.4)
archiver (Sec. 9.9)
cpio, pax, and tar commands (Sec. 9.9)
graphical interface (Sec. 9.4)
archiving services (Sec. 9.0)
ASU (Sec. 7.2.5)
windows utilities (Sec. 7.1.1)
Asynchronous Transfer Mode
See ATM
at command (Sec. 3.1)
ATM
configuring (Sec. 1.5.2.2)
SysMan Menu (Sec. A.2.5)
atmconfig utility (Sec. 1.5.2.2)
attribute, configurable kernel subsystem (Sec. 4.2.2)
audit configuration (Sec. 1.5.2.2)
audit_setup utility (Sec. 1.5.2.2)
authorization file
Event Manager (Sec. 13.2.3.2)
autofs command (Sec. 6.4.3)
automount command (Sec. 6.4.6)
displaying NFS mounted file system (Sec. 6.4.3)
autosysconfig command (Sec. 4.5.5)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
B
backup
AdvFS (Sec. 9.1)
applications (Sec. 9.1)
archiver (Sec. 9.9)
avoiding backup data corruption (Sec. 9.6)
cloning (Sec. 9.1)
configuration cloning (Sec. 9.1)
cpio, pax, and tar commands (Sec. 9.8)
dxarchiver utility (Sec. 9.9)
full (Sec. 9.6.1)
incremental (Sec. 9.6.2)
LSM (Sec. 9.1)
LSM mirrors (Sec. 9.1)
media changer (Sec. 9.5.1.2)
overview (Sec. 9.1)
procedure (Sec. 9.1)
remote (Sec. 9.6.3)
scheduling (Sec. 9.3)
tools and utilities (Sec. 9.8)
UFS quota files (Sec. 7.3.2)
UFS sparse files (Sec. 7.3.2)
using cron for log files (Sec. 3.1.3)
using scripts (Sec. 9.6.3)
bcheckrc script (Sec. 3.1)
binary accounting record (Sec. 10.5.8)
BIND/DNS
See DNS/BIND
bindconfig utility (Sec. 1.5.2.2)
binlog (Sec. 13.1)
and Event Manager (Sec. 13.1)
binlog.conf file (Sec. 12.2.1.3)
binlog.conf file (Sec. 14.3.3)
binlogd daemon (Sec. 12.1.1)
binlogd daemon (Sec. 12.2.4.2)
binlogd daemon (Sec. 14.3.3)
and Event Manager (Sec. 13.1.4)
disable UDP socket (Sec. 12.2.4.2)
stopping (Sec. 12.2.4.2)
binlog_data.c file (Sec. 12.2.5)
boot (Sec. 2.2)
alternate kernel (Sec. 2.4.2)
console (Sec. 2.3.5)
flags -i (Sec. 2.4.3)
genvmunix (Sec. 2.2.2)
interactive (Sec. 2.4.3)
overriding set commands (Sec. 2.4.2)
preparation, after a system crash (Sec. 2.3.4)
preparation, from a halted system (Sec. 2.3.2)
preparation, powered-down systems (Sec. 2.3.1)
preparation, to single-user mode (Sec. 2.3.3)
standalone (Sec. 2.3.5)
troubleshooting (Sec. 2.9)
boot block (Sec. 6.1.4.1)
boot command, options (Sec. 2.4)
boot device (Sec. 2.4.1)
boot disk, duplicating (Sec. 9.7.5.4)
boot drive, alternate (Sec. 9.7.5.3)
boot log messages (Sec. 12.5)
bootable tape (Sec. 9.10)
bootable tape (Sec. 9.4)
graphical user interface (Sec. 6.4)
locking file (Sec. 9.10)
SysMan Menu (Sec. A.2.9)
tape requirements (Sec. 9.10.1)
bootdef_dev (Sec. 2.4.1)
bootdef_dev (Sec. 2.4.1)
boot_osflags variable (Sec. 2.3.5)
Bourne shell (Sec. 7.1.4)
Bourne shell (Sec. 7.3.3)
btcreate command (Sec. 9.10)
btcreate command (Sec. 9.4)
btextract command (Sec. 9.10)
bttape utility (Sec. 9.10)
bttape utility (Sec. 9.4)
bttape.pid locking file (Sec. 9.10)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
C
C shell (Sec. 7.1.4)
CDE (Sec. A.1)
administration graphical interfaces (Sec. 1.5)
Application Manager (Sec. 1.5)
configuration (Sec. 1.5.2.2)
configuration utilities (Sec. 1.5.1)
Daily Administration (Sec. A.1)
front panel (Sec. 1.5)
Monitoring/Tuning (Sec. A.1)
power management (Sec. 3.5.2.1)
CDFS (Sec. 6.1)
CDSL (Sec. 1.4)
CDSL (Sec. 12.2)
administering (Sec. 6.2.3)
and clusters (Sec. 6.2)
and shared files (Sec. 6.2.2)
as symbolic links (Sec. 6.2.2.1)
defined (Sec. 6.2.2)
fixing (Sec. 6.2.3.2)
in file system hierarchy (Sec. 6.2)
structure (Sec. 6.2.2.1)
verifying (Sec. 6.2.3.1)
cdslinvchk command (Sec. 6.2.3.1)
century, setting the (Sec. 2.7.2)
cfgmgr daemon (Sec. 4.5)
cfgmgr.auth file (Sec. 4.5.7)
checklist (Sec. 1.5.1)
chfn command (Sec. 7.1.4)
chmod command (Sec. 6.1.4.3)
chsh command (Sec. 7.1.4)
ckpacct shell script (Sec. 10.5.3)
class scheduler (Sec. A.2.4)
class_admin command (Sec. A.2.4)
cloning (Sec. 9.1)
disk (Sec. 9.7.5)
information (Sec. 1.3)
installation
cluster
CDSL (Sec. 6.2)
member (Sec. 6.2.2.1)
shared file (Sec. 6.2.2)
cmx exerciser (Sec. 11.4.6)
collect utility (Sec. 11.1.2.5)
collect utility (Sec. 11.2)
Compaq Analyze (Sec. 13.1.1)
Compaq Analyze (Sec. 13.1.4)
and binlogd (Sec. 13.1.4)
error reporting (Sec. 12.0)
configuration file
adding devices to (Sec. 4.6.1)
entries (Sec. 4.7.4)
event logging (Sec. 12.2.1.1)
extensions to (Sec. 4.7.2)
keywords (Sec. 4.7.4)
NAME.list file (Sec. 4.7.2)
param.c file (Sec. 4.7.3)
Configure System Dump GUI (Sec. 14.2)
connect session (Sec. 10.4.5)
connection methods, printer (Sec. 8.1.1)
connection types, printer (Sec. 8.5.2.5)
console
auto_action reboot (Sec. 2.1.2)
boot (Sec. 2.3.5)
boot command (Sec. 2.3.5)
boot device (Sec. 2.4.1)
boot environment variables (Sec. 2.4.1)
boot_osflags (Sec. 2.3.5)
boot_osflags options (Sec. 2.4.1)
environment variables (Sec. 2.4.1)
overriding variables (Sec. 2.4.2)
setting variables (Sec. 2.1.5)
show devices command (Sec. 2.4.1)
standalone boot (Sec. 2.3.5)
console commands
console environment variables
defined (Sec. 2.4.1)
setting (Sec. 1.11.1.3)
console messages (Sec. 1.11.2.1.1)
console port (Sec. 1.11)
console port (Sec. 1.11.2.1)
setting up (Sec. 1.11.1)
console prompt (Sec. 2.11.2)
console variables (Sec. 2.1.3.1)
consvar command
getting console variables (Sec. 2.1.3.1)
setting console variables (Sec. 2.1.5)
context-dependent symbolic link (Sec. 6.2)
continuable dump (Sec. 14.5.1)
copying a disk (Sec. 9.7.5)
cpio command (Sec. 9.4)
cpio command (Sec. 9.8)
crash command (Sec. 14.5.1)
crash directory, changing (Sec. 14.3.6)
crash dump (Sec. 12.3)
allocating space for (Sec. 14.3.5)
archiving (Sec. 14.6)
changing default location of (Sec. 14.2.2)
changing default location of (Sec. 14.3.6)
compressed (Sec. 14.2.1)
compressed (Sec. 14.4.5)
compression ratio (Sec. 14.2.2)
content and method (Sec. 14.3.6)
continuable (Sec. 14.5.1)
creation (Sec. 14.3)
disk space (Sec. 14.3.5)
enabling (Sec. 14.2.1)
estimating size (Sec. 14.3.4)
exempt memory (Sec. 14.4.6)
file (Sec. 14.1)
forcing on a hung system (Sec. 14.5.2)
full or partial (Sec. 14.3.5)
header (Sec. 14.3.4)
including user page tables in partial dumps (Sec. 14.4.2)
overview (Sec. 14.0)
selecting full or partial (Sec. 14.2.1)
selecting full or partial (Sec. 14.2.2)
selecting partial or full (Sec. 14.4.3)
to remote host (Sec. 14.4.7)
crash recovery (Sec. 12.3)
crash recovery (Sec. 2.3.4)
Create Dump Snapshot (Sec. 14.2.1)
creating a group (Sec. 7.5)
cron
cleaning log files (Sec. 3.1.3)
log file management (Sec. 3.1.3)
cron daemon
maintaining log files using (Sec. 12.4)
setting up automatic accounting (Sec. 10.2.4)
submitting commands to daemon (Sec. 3.1.3)
crontab command (Sec. 3.1.3)
crontabs directory (Sec. 3.1.3)
csh
See C shell
Custom Setup GUI (Sec. 1.3)
Custom Setup GUI (Sec. 1.5.2.2)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
D
Daily Administration tools folder (Sec. A.1)
data block (Sec. 6.1.4.4)
data limit (Sec. 3.6.5)
data recovery (Sec. 9.6.4)
date command (Sec. 2.7.2)
dd command (Sec. 5.3)
cloning on a data disk (Sec. 5.3)
DECevent (Sec. 13.1.1)
DECevent (Sec. 13.1.4)
error reporting (Sec. 12.0)
deferred mode swapping (Sec. 3.6.3)
device definition keyword (Sec. 4.6.1)
device pathname, explanation (Sec. 8.5.2.4)
device special file (Sec. 6.1.6)
displaying name (Sec. 6.4.3)
file system (Sec. 6.4.2)
printer (Sec. 8.5.2.4)
device, adding support to the kernel (Sec. 4.6.1)
df command (Sec. 6.7.2.1)
DHCP server (Sec. 1.5.2.2)
SysMan Menu (Sec. A.2.5)
directory (Sec. 6.1.5)
backing up (Sec. 9.0)
hierarchy (Sec. 6.1.1)
link (Sec. 6.1.4.3)
recovering (Sec. 9.0)
type (Sec. 6.1)
disaster recovery (Sec. 9.0)
disk
backup (Sec. 9.1)
cloning (Sec. 5.3)
copying (Sec. 5.3)
duplicating and copying (Sec. 9.7.5)
label (Sec. 6.1.2)
monitoring (Sec. 6.7.2)
partition table (Sec. 6.3.1)
Disk Configuration utility
See diskconfig GUI
disk management (Sec. 5.1)
disk partition (Sec. 6.1)
defined (Sec. 6.1.2)
overlapping partitions (Sec. 5.2.3)
sizes (Sec. 6.1.2)
view partition sizes (Sec. 5.2.2)
writing default label (Sec. 5.2.2)
disk quota (Sec. 6.5)
recovering from over-quota condition (Sec. 6.5.1)
disk recovery (Sec. 9.6.4)
disk space
checking free space (Sec. 6.7.2.1)
checking usage (Sec. 6.7.2.2)
listing blocks used (Sec. 6.7.2.2)
diskconfig GUI (Sec. 1.5.2.2)
diskconfig GUI (Sec. 5.1)
diskconfig GUI (Sec. 6.1.2)
creating file system (Sec. 6.4.4)
disklabel command (Sec. 5.2.1)
disklabel command (Sec. 6.1.2)
editing partition parameters (Sec. 5.2.2)
labeling a disk (Sec. 9.7.1)
using in recovery (Sec. 9.7.5.3)
view partition sizes (Sec. 5.2.2)
writing a default partition table (Sec. 9.7.1)
writing the default label (Sec. 5.2.2)
zeroing label (Sec. 5.3)
disktab file (Sec. 6.1.2)
diskusg command (Sec. 10.6.2)
dismounting a file system (Sec. 6.4.2)
division of privileges
See DOP
DNS/BIND (Sec. 1.5.2.2)
Quick Setup (Sec. 1.5.2.1)
SysMan Menu (Sec. A.2.5)
dn_setup utility (Sec. 9.7.5.3)
doconfig program (Sec. 4.3)
doconfig program (Sec. 4.6.1)
doconfig program (Sec. 4.6.2)
doconfig program (Sec. 4.6.3)
documentation (Sec. 1.5.1)
account administration (Sec. 7.1.2)
archiving services (Sec. 9.5)
crash dump (Sec. 14.1)
printer and print services (Sec. 8.1.3)
system configuration (Sec. 4.2.2)
system customization (Sec. 3.6)
system monitoring and testing (Sec. 11.1.2.5)
system shutdowns and reboots (Sec. 2.1.2)
UFS file systems (Sec. 6.2)
dodisk shell script (Sec. 10.6.1)
domain name service
See DNS/BIND
DOP
configuring (Sec. 1.5.2.2)
SysMan Menu (Sec. A.2.7)
dsfmgr command
listing device special files (Sec. 6.4.4)
using in recovery (Sec. 9.7.5.3)
du command (Sec. 6.7.2.2)
dump command (Sec. 9.4)
dumpfs command, checking free disk space (Sec. 6.7.2.1)
dumpsys command (Sec. 14.3.4)
dumpsys command (Sec. 14.5.1)
dump_user_pte_page system attribute (Sec. 14.4.2)
duplicate UID (Sec. 7.4.2.4)
duplicating a root disk (Sec. 9.7.5)
dxaccounts GUI (Sec. 1.5.2.2)
defaults (Sec. 7.3.3)
dxarchiver GUI (Sec. 9.9)
dxfileshare GUI (Sec. 1.5.2.2)
mounting (importing) shared file system (Sec. 6.4.6)
sharing file system (Sec. 6.4.5)
dxkerneltuner GUI (Sec. 11.1.2.4)
dxlicenses GUI (Sec. 1.5.2.2)
dxpower GUI (Sec. 3.5)
dxshutdown GUI (Sec. 2.11.1)
dxsysinfo GUI (Sec. 11.1.2.4)
dynamic subsystem
determining the state of (Sec. 4.5.2)
kernel configuration (Sec. 4.5.1)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
E
e-mail
See also Mail Configuration GUI
See also mailusradm GUI
configuring (Sec. 1.5.2.2)
Quick Setup (Sec. 1.5.2.1)
ECU (Sec. 1.11)
ed editor availability (Sec. 2.3.5)
edquota editor
activating (Sec. 6.5.2)
setting grace period (Sec. 6.5.2)
energy conservation (Sec. 3.5)
enhanced security
user account changes (Sec. 7.1.2)
envconfig utility (Sec. 11.3)
stopping and starting envmond daemon (Sec. 11.3.3)
Environment Configuration utility
See ECU
environmental monitoring
components of (Sec. 11.3)
envmod daemon (Sec. 11.3.3)
get_info function (Sec. 11.3.1.1)
HP Insight Manager (Sec. 11.3)
shutdown (Sec. 2.10)
using the envmond daemon (Sec. 11.3)
using the kernel module component (Sec. 11.3)
envmond daemon (Sec. 11.3)
envmond daemon (Sec. 11.3.2)
configuring (Sec. 11.3.3)
reading rc.config file (Sec. 11.3.3)
error
cautionary system shutdown (Sec. 2.10)
event (Sec. 13.1)
error logging (Sec. 12.0)
printer (Sec. 8.5.4)
escalation report (Sec. 11.1.2.4)
/etc/evmlogger.conf
See evmlogger.conf file
/etc/exports file
file system sharing (Sec. 6.4.5)
/etc/fstab file
See fstab file
/etc/gettydefs file
See gettydefs file
/etc/group file
See group file
/etc/inittab file
See inittab file
/etc/networks file
See networks file
/etc/passwd file
See passwd file
/etc/rc.config file
See rc.config file
/etc/routes file
See routes file
/etc/securettys file
See securettys file
/etc/sysconfigtab file
See sysconfigtab file
event
defined (Sec. 13.1)
model of (Sec. 13.1.2)
reporting (Sec. 12.0)
startup (Sec. 13.1.3)
suppression (Sec. 13.3.13.1)
event channel (Sec. 13.1)
event logging
binary configuration file (Sec. 12.2.1.3)
binary event-logging facility (Sec. 12.1.1)
configuration file (Sec. 12.2.1.1)
configuring binary event logger (Sec. 12.2.5)
crash recovery (Sec. 12.3)
creating daily files (Sec. 12.2.1.1)
creating special files (Sec. 12.2.3)
log file protections (Sec. 12.1)
maintaining files (Sec. 12.3)
setting up (Sec. 12.1.2)
starting and stopping daemons (Sec. 12.2.4)
stopping the syslogd daemon (Sec. 12.2.4.1)
syslogd daemon (Sec. 12.1)
system event-logging facility (Sec. 12.1)
event management (Sec. 13.0)
event management (Sec. A.2.4)
Event Manager (Sec. 13.0)
administration (Sec. 13.2)
administrative utilities (Sec. 13.1.3.1)
API (Sec. 13.1.3.2)
archived (zipped) logs (Sec. 13.2.4)
authorization file (Sec. 13.2.3.2)
channel configuration (Sec. 13.2.2.2)
channel manager (Sec. 13.1.3)
channel manager (Sec. 13.2.4)
command line utilities (Sec. 13.1.3.1)
components (Sec. 13.1.3)
configuration (Sec. 13.2.2)
event channel (Sec. 13.1)
event logging (Sec. 13.3.13.1)
event suppression (Sec. 13.3.13.1)
event template (Sec. 13.2.5)
evmchmgr command (Sec. 13.2.4)
evmd configuration (Sec. 13.2.2.1)
evmd daemon (Sec. 13.1.3)
evmget (Sec. 13.1.3)
evmlogger (Sec. 13.1.3)
evmreload (Sec. 13.2.2)
evmtemplate file (Sec. 13.2.5)
evmviewer (Sec. 13.3.11)
evmwatch (Sec. 13.1.2)
features (Sec. 13.1.1)
get server (Sec. 13.1.3)
installing clients (Sec. 13.2.6)
log file management (Sec. 13.2.4)
logger configuration (Sec. 13.2.2.3)
processing events automatically (Sec. 13.3.13.2)
remote access (Sec. 13.2.3.3)
responding to events (Sec. 13.3.13)
reviewing logged events (Sec. 13.3.11)
security considerations (Sec. 13.2.3)
shut down (Sec. 2.1.3.1)
SysMan Menu (Sec. A.2.4)
system files (Sec. 13.1.3.3)
troubleshooting (Sec. 13.4)
user authentication (Sec. 13.2.3.1)
using in administration (Sec. 13.3)
utilities (Sec. 13.1.2)
evm.auth file (Sec. 13.2.3.2)
evmchmgr command (Sec. 13.1.3)
evmchmgr command (Sec. 13.1.3.1)
evmchmgr command (Sec. 13.2.4)
evmd daemon (Sec. 13.1.3)
evmd daemon (Sec. 13.1.3.1)
evmget command (Sec. 13.1.3.1)
evmget_srv process (Sec. 13.1.3)
evmlogger command (Sec. 13.1.3.1)
evmlogger command (Sec. 13.3.13)
evmlogger.conf file (Sec. 13.3.13)
evmpost command (Sec. 13.1.3.1)
evmreload command (Sec. 13.1.3.1)
evmreload command (Sec. 13.2.2)
evmshow command (Sec. 13.1.3.1)
evmsort command (Sec. 13.1.3.1)
evmstart command (Sec. 13.1.3.1)
evmstop command (Sec. 13.1.3.1)
evmtemplate file (Sec. 13.2.5)
evmviewer utility (Sec. 13.3.11)
evmwatch command (Sec. 13.1.2)
evmwatch command (Sec. 13.1.3.1)
exempt memory (Sec. 14.2.1)
exempt memory (Sec. 14.4.6)
expected_dump_compression variable (Sec. 14.4.4)
exporting file system (Sec. 6.4.5)
extendfs command (Sec. 6.3.6)
extending UFS file systems (Sec. 6.3.6)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
F
fan failure (Sec. 11.3)
fastboot command (Sec. 2.12.3)
fasthalt command (Sec. 2.12.2)
FFM (Sec. 6.1)
file (Sec. 6.1)
backing up (Sec. 9.0)
protection (mode) (Sec. 6.1.4.3)
recovering (Sec. 9.0)
file sharing, configuration (Sec. 1.5.2.2)
file system (Sec. 6.0)
administering with SysMan (Sec. 6.4)
automount (Sec. 6.4.6)
boot block (Sec. 6.1.4.1)
checking (Sec. 6.7.1)
checking disk using hwmgr (Sec. 6.4.4)
corruption shutdown (Sec. 2.10)
creating using SysMan (Sec. 6.4.6.2)
creating with diskconfig GUI (Sec. 6.4.4)
creating with the newfs command (Sec. 6.3.1)
current mount points, displaying (Sec. 6.4.3)
data block (Sec. 6.1.4.4)
device special file name (Sec. 6.4.2)
directory hierarchy (Sec. 6.1.1)
dirty file system (Sec. 6.1.3)
dirty file system (Sec. 6.3.2)
dismounting (Sec. 6.4.2)
dismounting (Sec. 6.4.3)
displaying AdvFS domains (Sec. 6.4.3)
displaying mounted using SysMan (Sec. 6.4.3)
displaying NFS mounted file system (Sec. 6.4.3)
exercising (Sec. 11.4.3)
exporting (sharing) (Sec. 6.4.5)
file system full message (Sec. 6.3.6)
file-on-file, displaying (Sec. 6.4.3)
fstab file (Sec. 6.3.3)
increasing capacity of (Sec. 6.3.6)
inode blocks (Sec. 6.1.4.2)
inode blocks (Sec. 6.1.4.3)
interactive repair (Sec. 6.7.1)
limiting usage (Sec. 6.5)
link count (Sec. 6.1.4.3)
managing directories (Sec. 6.1.5)
managing files (Sec. 6.1.5)
monitoring (Sec. 6.7.2)
mount NFS using SysMan (Sec. 6.4.6)
mounting (Sec. 6.3.2)
mounting (Sec. 6.3.3)
mounting (Sec. 6.4.4)
mounting standalone (Sec. 2.3.5)
mounting using dxfileshare GUI (Sec. 6.4.6)
protection (mode) (Sec. 6.1.4.3)
quotas for groups (Sec. 6.5)
quotas for user accounts (Sec. 6.5)
refresh listing of currently mounted (Sec. 6.4.3)
sharing using dxfileshare GUI (Sec. 6.4.5)
structure (Sec. 6.1)
superblock (Sec. 6.1.4.2)
supported (Sec. 6.1)
supported block size (Sec. 6.3.2)
SysMan Menu utilities (Sec. 6.4.1)
troubleshooting (Sec. 6.8)
tuning (Sec. 6.7.3)
unmounting (Sec. 6.3.5)
unsharing (Sec. 6.4.5.2)
verifying disk partition (Sec. 6.4.4)
verifying mount point (Sec. 6.4.4)
file system quota (Sec. 6.5)
activating (Sec. 6.5.2)
activating edquota editor (Sec. 6.5.2)
setting automatic (Sec. 6.5.4)
setting grace period (Sec. 6.5.2)
turning off (Sec. 6.5.2)
verifying (Sec. 6.5.4)
file system utilities
CDE Storage_Management (Sec. 6.3.6.2)
SysMan Menu (Sec. A.2.9)
file types (Sec. 6.1.5)
device (Sec. 6.1.5)
domain socket (Sec. 6.1.5)
named pipes (Sec. 6.1.5)
symbolic link files (Sec. 6.1.5)
file-on-file file system
displaying mounted (Sec. 6.4.3)
finger command (Sec. 7.1.4)
firmware
setting variables (Sec. 2.1.5)
sources (Sec. 9.7.5.1)
fsck command (Sec. 6.7.1)
checking file system (Sec. 6.7.1)
correcting file system (Sec. 6.7.1)
overlapping partitions (Sec. 6.7.1)
shut down (Sec. 2.1.5)
syntax (Sec. 6.7.1)
fstab file (Sec. 6.3.2)
fstab file (Sec. 6.3.3)
displaying current mounted file system (Sec. 6.4.3)
editing (Sec. 6.3.3)
fsx command (Sec. 11.4.3)
fwtmp command (Sec. 10.4.2)
correcting wtmp file (Sec. 10.4.2)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
G
gated daemon (Sec. 1.5.2.2)
SysMan Menu (Sec. A.2.5)
gecos data (Sec. 7.3.3)
generic kernel (Sec. 4.3)
genvmunix (Sec. 2.1.4)
genvmunix (Sec. 2.2.2)
genvmunix (Sec. 2.4.2)
getty command (Sec. 2.6)
getty command (Sec. 2.6.2.3)
getty command (Sec. 3.1.1.3)
settings (Sec. 1.11.1.3)
gettydefs file (Sec. 3.1)
get_info function (Sec. 11.3.1.1)
GID (Sec. 7.3.2)
GID (Sec. 7.3.4)
in passwd file (Sec. 7.3.3)
limits (Sec. 7.3.4)
maximum number (Sec. 7.3.2)
Graphical User Interfaces
See GUI
group (Sec. 7.3)
group (Sec. A.2.1)
adding (Sec. 7.5)
administering (Sec. 7.5)
checking file (Sec. 7.1.4)
commands (Sec. 7.2.4)
defaults (Sec. 7.5)
deleting (Sec. 7.5)
group membership (Sec. 7.5)
modifying (Sec. 7.5)
password (Sec. 7.5)
PC (Sec. 7.5)
group file (Sec. 7.3)
group file (Sec. 7.3.1)
group file (Sec. 7.3.4)
group file (Sec. A.2.1)
adding a group (Sec. 7.3.3)
line length limits (Sec. 7.3.4)
group identifier
See GID
group membership (Sec. 7.5)
group name (Sec. 7.3.4)
groupadd command (Sec. 7.2.4)
groupdel command (Sec. 7.2.4)
groupmod command (Sec. 7.2.4)
grpck command (Sec. 7.1.4)
GUI (Sec. A.1)
Advanced File System (Sec. 6.4)
bootable tape creation (Sec. 6.4)
Configure System Dump (Sec. 14.2)
Create Dump Snapshot (Sec. 14.2.1)
Custom Setup (Sec. 1.3)
diskconfig (Sec. 5.1)
diskconfig (Sec. 6.4.4)
dxaccounts (Sec. 1.5.2.2)
dxaccounts (Sec. 7.2.2)
dxarchiver (Sec. 9.9)
dxfileshare (Sec. 6.4.5)
dxfileshare (Sec. 6.4.6)
dxkerneltuner (Sec. 11.1.2.4)
dxlicenses (Sec. 1.5.2.2)
dxpower utility (Sec. 3.5)
dxshutdown (Sec. 2.11.1)
dxsysinfo (Sec. 11.1.2.4)
LSM (Sec. 6.4)
Mail Configuration (Sec. 1.5.2.2)
Mail Configuration (Sec. A.2.3)
mailusradm (Sec. A.2.3)
Quick Setup (Sec. 1.3)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
H
halt command (Sec. 2.11.2)
halt command (Sec. 2.12)
halting the system (Sec. 2.11)
halting the system (Sec. 2.11.2)
halting the system (Sec. 2.12.2)
hardware management (Sec. A.2.2)
hardware, adding support to the kerne (Sec. 4.6.1)
host equivalence
SysMan Menu (Sec. A.2.5)
host file
SysMan Menu (Sec. A.2.5)
HP Insight Manager (Sec. 11.1.2.4)
configuring (Sec. 1.5.2.2)
port (Sec. 1.9)
hwmgr command
checking disk availability (Sec. 6.4.4)
SysMan Menu (Sec. A.2.2)
viewing devices (Sec. 6.4.7)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
I
immediate mode swapping (Sec. 3.6.3)
importing file system (Sec. 6.4.6)
init command (Sec. 2.11)
init command (Sec. 2.2.2)
init command (Sec. 2.5)
init command (Sec. 2.6.2)
changing run level (Sec. 2.6.2)
multiuser run level (Sec. 2.6.2.1)
reexamining the inittab file (Sec. 2.6.2.3)
init.d directory (Sec. 3.1)
structure (Sec. 3.1.2.1)
initialization (Sec. 2.2.2)
inittab file (Sec. 2.1.4)
inittab file (Sec. 2.2.2)
inittab file (Sec. 2.5)
inittab file (Sec. 2.6.2)
inittab file (Sec. 3.1)
inittab file (Sec. 3.1.1)
inittab file (Sec. 3.1.1.5)
activating terminal lines (Sec. 2.6.2.3)
boot entry (Sec. 2.6.1)
changing run level (Sec. 2.6.1)
initdefault entry (Sec. 2.6)
rc scripts (Sec. 2.6.2.1)
inode (Sec. 6.1.4.2)
blocks (Sec. 6.1.4.3)
free (Sec. 6.1.4.2)
number (Sec. 6.1.4.3)
Insight Manager
See HP Insight Manager
install backup device (Sec. 9.7.5.3)
installation cloning
interactive boot (Sec. 2.4.3)
internationalization (Sec. 3.2)
internationalization (Sec. 3.3)
printing (Sec. 8.6.2)
internet protocol, router (Sec. 1.5.2.2)
iostat command (Sec. 11.1.2.1)
iostat command (Sec. A.2.4)
IP
See internet protocol
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
K
kernel
advanced configuration
advanced tuning
attributes for environmental monitoring (Sec. 11.3)
boot alternate (Sec. 2.2.2)
boot alternate (Sec. 2.4.1)
configuration file entries (Sec. 4.7.4)
configuring (Sec. 4.0)
debugging remotely (Sec. 1.11.2.1)
dynamic configuration (Sec. 4.5)
generic (Sec. 4.3)
postinstallation configuration (Sec. 4.3)
static configuration (Sec. 4.6)
target (Sec. 4.3)
kernel configuration manager (Sec. 11.3)
kernel module
loading and unloading (Sec. 11.3)
supported parameters (Sec. 11.3)
kernel subsystem (Sec. 3.1)
determining the type of (Sec. 4.5.3)
dynamically loadable (Sec. 4.4)
setting configuration variables (Sec. 3.1)
unloading dynamic (Sec. 4.5.4)
kernel subsystem attributes (Sec. 4.5.6)
determining value (Sec. 4.5.6.1)
identifying (Sec. 4.5.6.2)
listing values of (Sec. 4.5.8.1)
remote management (Sec. 4.5.7)
Kernel Tuner GUI
See dxkerneltuner utility
killall command (Sec. 2.11)
kopt command (Sec. 4.6.2)
Korn shell (Sec. 7.1.4)
ksh
See Korn shell
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
L
label, zeroing (Sec. 5.3)
last command (Sec. 10.4.9)
lastcomm command (Sec. 10.5.9)
lastlogin shell script (Sec. 10.4.8)
LAT
configuring (Sec. 1.5.2.2)
SysMan Menu (Sec. A.2.5)
latsetup utility (Sec. 1.5.2.2)
LBN (Sec. 6.1.2)
LDAP (Sec. 7.1.2)
LDAP (Sec. A.2.1)
administering user accounts (Sec. 7.4)
configuration (Sec. A.2.11)
license (Sec. 1.5.2.1)
License Manager
See dxlicenses GUI
Lightweight Directory Access Protocol
See LDAP
line printer daemon (Sec. 8.5.3)
lineuse file (Sec. 10.4.5)
link (Sec. 6.1.4.3)
CDSL (Sec. 6.2.2.1)
CDSL (Sec. 6.2.2.1)
lmfsetup command (Sec. A.2.8)
SysMan Menu (Sec. A.2.8)
local area transport
See LAT
locale (Sec. 3.2)
support files (Sec. 3.2)
lock
account administration (Sec. 7.1.2)
log files
backup by cron (Sec. 3.1.3)
maintaining (Sec. 12.3)
using cron to clean up (Sec. 3.1.3)
/var/adm/messages (Sec. 11.1.2.4)
logged events, reviewing (Sec. 13.3.11)
logging, crash dump (Sec. 14.3.2)
logical block number (Sec. 6.1.2)
Logical Storage Manager
See LSM
login
directory (Sec. 7.3.3)
disabled (Sec. 2.11.2)
shell (Sec. 7.3.3)
lpc command arguments (Sec. 8.4.4)
lpd daemon (Sec. 8.5.3)
lpd filter (Sec. 8.5.4)
lprsetup utility (Sec. 8.3)
lprsetup utility (Sec. 8.3.4)
main menu (Sec. 8.3.5)
lptest command (Sec. 8.7)
LSM (Sec. A.2.9)
creating a UFS file system (Sec. 6.4.7)
utilities (Sec. 6.4)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
M
Mail Configuration GUI (Sec. 1.5.2.2)
Mail Configuration GUI (Sec. A.2.3)
mailsetup utility (Sec. A.2.3)
mailusradm GUI (Sec. A.2.3)
max-per-proc-address-space (Sec. 3.6.5)
max-per-proc-data-size (Sec. 3.6.5)
max-per-proc-stack-size (Sec. 3.6.5)
media changer (Sec. 9.5.1.2)
{memb} path element (Sec. 6.2.2.1)
memory
dumping to (Sec. 14.4.6)
exercising (Sec. 11.4.4)
testing shared memory (Sec. 11.4.5)
memory file system (Sec. 6.1)
memx command (Sec. 11.4.4)
swap space restrictions (Sec. 11.4.4)
message catalogs, NLS (Sec. 3.2)
message, receiving from system (Sec. 11.3.3)
messages log (Sec. 11.1.2.4)
messages log (Sec. 12.5)
MFS (Sec. 6.3.1)
mirroring (Sec. 9.1)
mkdir command (Sec. 6.4.4)
mkfdmn command (Sec. 5.2.1)
mkfdmn command (Sec. 5.2.1)
modem (Sec. 1.11)
setting up (Sec. 1.11.1)
troubleshooting (Sec. 1.11.3)
monitoring (Sec. 11.0)
monitoring (Sec. A.2.4)
using sys_check (Sec. 11.2.1)
Monitoring Performance History
See MPH utility
monitoring the environment (Sec. 11.3)
monitoring the system
See monitoring
Monitoring/Tuning tools folder (Sec. A.1)
mount command (Sec. 6.3.2)
mount command (Sec. 6.3.3)
changing status (Sec. 6.3.2)
displaying mounted file system (Sec. 6.4.3)
file system (Sec. 6.4.4)
standalone boot (Sec. 2.3.5)
SysMan Menu (Sec. 6.4.4)
mount point (Sec. 6.4.2)
creating (Sec. 6.4.4)
displaying current used (Sec. 6.4.3)
temporary (Sec. 6.4.3)
verification (Sec. 6.4.4)
MPH utility (Sec. 11.2.3)
msgbuf.savecore file (Sec. 14.3.3)
multibus failover (Sec. 2.4.1)
multiuser boot (Sec. 2.2.2)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
N
name server
See DNS/BIND
netstat command (Sec. 11.1.2.1)
network configuration
Network Setup Wizard (Sec. 1.5.2.2)
Quick Setup (Sec. 1.5.2.1)
network device (Sec. 9.7.5.2)
Network File System
See NFS
Network Information Service
See NIS
network interface card, configuration (Sec. 1.5.2.2)
Network Time Protocol
See NTP
networks file (Sec. 1.5.2.2)
newfs command (Sec. 5.2.1)
creating a file system (Sec. 6.3.1)
options used in SysMan Menu (Sec. 6.4.7)
NFS
autofs utility (Sec. 6.4.3)
automount (Sec. 6.4.6)
configuring (Sec. 1.5.2.2)
displaying mounted file system (Sec. 6.4.3)
mount using SysMan (Sec. 6.4.6)
mounting (importing) file system (Sec. 6.4.6)
Quick Setup (Sec. 1.5.2.1)
SysMan Menu (Sec. A.2.5)
NIC (Sec. 1.5.2.2)
NIS (Sec. A.2.1)
configuring (Sec. 1.5.2.2)
Quick Setup (Sec. 1.5.2.1)
SysMan Menu (Sec. A.2.5)
nissetup utility (Sec. 1.5.2.2)
NLS
LOCPATH variable (Sec. 3.2.4)
message catalogs (Sec. 3.2.4)
modifying locale categories (Sec. 3.2.2)
NLSPATH variable (Sec. 3.2.4)
setting locale (Sec. 3.2.1)
NTP
configuring (Sec. 1.5.2.2)
Quick Setup (Sec. 1.5.2.1)
SysMan Menu (Sec. A.2.5)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
O
online help (Sec. 1.2.3)
osf_boot command (Sec. 2.4.3)
over-commitment mode swapping (Sec. 3.6.3)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
P
pac command (Sec. 10.8)
paging description (Sec. 3.6)
PAK
dxlicenses utility (Sec. 1.5.2.2)
Quick Setup (Sec. 1.5.2.1)
registering (Sec. A.2.8)
panic string (Sec. 14.5.2)
param.c file (Sec. 4.7.3)
partial_dump variable (Sec. 14.4.3)
passwd command (Sec. 7.1.4)
passwd file (Sec. 7.3.1)
passwd file (Sec. 7.3.3)
passwd file (Sec. A.2.1)
administration (Sec. A.2.1)
checking file (Sec. 7.1.4)
patching corrupted (Sec. 7.1.4)
password (Sec. 7.3.4)
group (Sec. 7.5)
setting (Sec. A.2.1)
pax command (Sec. 9.4)
pax command (Sec. 9.8)
PC
administering from (Sec. 1.6)
group (Sec. 7.5)
using SysMan on (Sec. 1.9)
PCF (Sec. 8.6.1)
pcfof print filter (Sec. 8.6.1)
PCL (Sec. 8.6.1)
per-proc-address-space (Sec. 3.6.5)
per-proc-data-size (Sec. 3.6.5)
per-proc-stack-size attribute (Sec. 3.6.5)
per-process memory limits (Sec. 3.6.5)
performance monitoring (Sec. 11.1.3)
current system status (Sec. 11.2.1)
performance, degradation shutdown (Sec. 2.10)
Point to Point Protocol
See PPP
POSIX shell (Sec. 7.1.4)
PostScript printing (Sec. 8.6.1)
power management (Sec. 3.5.2.1)
power off (Sec. 2.11.2)
PPP configuration (Sec. 1.5.2.2)
SysMan Menu (Sec. A.2.5)
pppd daemon (Sec. 1.5.2.2)
prctmp shell script (Sec. 10.4.7)
prdaily shell script (Sec. 10.9.4)
print filter (Sec. 8.6.2)
general purpose (Sec. 8.6.1)
print services (Sec. 8.0)
accounting (Sec. 10.8)
configuration (Sec. 1.5.2.2)
pac command (Sec. 10.8)
printcap file (Sec. 8.5.1)
printer characteristics database (Sec. 8.5.1)
printcap symbols for remote printers (Sec. 8.5.1)
printconfig utility (Sec. 8.3)
printer
accounting (Sec. 10.8)
adding a (Sec. 8.4)
ASU (Sec. 8.3.3)
controlling jobs and queues (Sec. 8.4.3)
device special file name (Sec. 8.5.2.4)
error log file (Sec. 8.5.4)
/etc/printcap file (Sec. 8.5.1)
flag bits (Sec. 8.5.6)
installing directly connected (Sec. 8.3.2)
installing remote (Sec. 8.3.2)
lpc command (Sec. 8.4.3)
lprsetup utility (Sec. 8.3.4)
printconfig utility (Sec. 8.3)
remote server (Sec. 8.5.7)
removing (Sec. 8.4.2)
reporting usage (Sec. 10.8)
routine system maintenance (Sec. 8.4)
system files (Sec. 8.1.4.3)
TCP/IP printing (Sec. 8.3.1)
troubleshooting (Sec. 8.7)
utilities (Sec. 8.1.5)
printer control file (Sec. 8.6.1)
printer services, accounting (Sec. 8.4.4)
privileges
See DOP
proc subsystem (Sec. 3.6.5)
process
initializing (Sec. 2.2.2)
virtual memory (Sec. 3.6.5)
Product Authorization Key
See PAK
protection, files (Sec. 6.1.4.3)
prtacct shell script (Sec. 10.9.3)
pwck command (Sec. 7.1.4)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
Q
Quick Setup GUI (Sec. 1.3)
Quick Setup GUI (Sec. 1.5.2.1)
quot command
listing blocks used (Sec. 6.7.2.2)
quota command (Sec. 7.1.4)
verifying block usage (Sec. 6.5.4)
quota limits (Sec. 6.5.1)
quotacheck command
verifying block usage (Sec. 6.5.4)
verifying file system quotas (Sec. 6.5.4)
quotaoff command
turning file system quotas off (Sec. 6.5.2)
quotaon command (Sec. 7.1.4)
activating file system quotas (Sec. 6.5.2)
quotas
See file system quota
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
R
rc directory structure (Sec. 3.1.2)
rc.config file (Sec. 2.3.5)
rc.config file (Sec. 3.1)
rc.config file (Sec. 6.2.2)
use by the envmond daemon (Sec. 11.3.3)
rc.config.common file (Sec. 2.3.5)
rc.config.common file (Sec. 6.2.2)
rc0 script (Sec. 2.1.4)
rc0 script (Sec. 3.1)
rc0.d directory (Sec. 3.1.2.2)
rc1 script (Sec. 2.1.4)
rc2 script (Sec. 3.1)
rc2.d directory (Sec. 3.1.2.3)
rc3 script (Sec. 2.1.4)
rc3 script (Sec. 3.1)
rc3.d directory (Sec. 3.1.2.4)
rcmgr command (Sec. 14.3.6)
rcmgr command (Sec. 2.3.5)
rcmgr command (Sec. 3.1)
rcn.d directory (Sec. 3.1)
rdump command (Sec. 9.4)
reboot command (Sec. 2.12.1)
automatic (Sec. 2.1.2)
performing abrupt reboot (Sec. 2.12.1)
reboot procedure (Sec. 2.11.4)
record
binary accounting (Sec. 10.5.8)
daily accounting (Sec. 10.5.8)
overall connect session (Sec. 10.4.5)
recovering a root disk (Sec. 9.7.5)
recovery
data (Sec. 9.6.4)
directory (Sec. 9.0)
disaster (Sec. 9.0)
disk (Sec. 9.6.4)
remote connection (Sec. 1.11)
remote event monitoring (Sec. 13.2.3.3)
remote host
denying shared files system access (Sec. 6.4.5.2)
dumping to (Sec. 14.4.7)
enabling shared file system access (Sec. 6.4.5.1)
Remote Installation Service
See RIS
remote system administration
See system administration
remote systems (Sec. 1.11)
features for administering (Sec. 1.11.2.1)
remote who utility (Sec. 1.5.2.2)
removing a group (Sec. 7.5)
removing a user account (Sec. 7.4.2.1)
restore
procedures (Sec. 9.0)
retrieving a file system (Sec. 9.7.1)
retrieving data (Sec. 9.6.4)
restore command (Sec. 9.4)
retrieving files (Sec. 9.7.1)
retrieving files interactively (Sec. 9.7.2)
retrieving remote files (Sec. 9.7.3)
using in recovery (Sec. 9.7.5.3)
restoring /usr file system (Sec. 9.7.6)
restoring /var file system (Sec. 9.7.6)
RIS (Sec. 9.7.5.2)
root disk
duplicating (Sec. 9.7.5.4)
recovering (Sec. 9.7.5)
root file system
mounting read-write from single-user mode (Sec. 2.3)
mounting read-write from single-user mode (Sec. 6.7.1)
verifying (Sec. 2.4.3)
root login, enabling on terminal (Sec. 3.1.1.6)
routed daemon (Sec. 1.5.2.2)
routes file (Sec. 1.5.2.2)
routing, configuration (Sec. 1.5.2.2)
rrestore command (Sec. 9.4)
run command script (Sec. 2.2.2)
run command script (Sec. 2.5)
run level (Sec. 2.5)
changing (Sec. 2.6)
console (Sec. 3.1.1.3)
defaults (Sec. 3.1.1)
identifying (Sec. 2.5)
initializing (Sec. 3.1.1.1)
multiuser (Sec. 2.5)
process (Sec. 3.1.1.5)
single-user (Sec. 2.5)
using init command (Sec. 2.6.2)
wait entry (Sec. 3.1.1.2)
runacct shell script (Sec. 10.9.1)
runsyscheck
See sys_check utility
rwhod daemon (Sec. 1.5.2.2)
SysMan Menu (Sec. A.2.5)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
S
sa command (Sec. 10.5.5)
SAS
See standalone system
savecore command (Sec. 14.1.2)
crash dump file creation (Sec. 14.3.2)
SAVECORE_DIR variable, setting (Sec. 14.3.6)
SAVECORE_FLAGS variable, setting (Sec. 14.3.6)
/sbin/kopt command
See kopt command
sector (Sec. 6.1.2)
securettys file (Sec. 3.1)
securettys file (Sec. 3.1.1.6)
security
configuring (Sec. 1.5.2.2)
disabling UDP socket (Sec. 12.2.4.2)
enhanced (C2) security (Sec. 7.1.2)
event management (Sec. 13.2.3)
remote host messages (Sec. 12.1.1)
syslog (Sec. 12.2.2)
SysMan Menu (Sec. A.2.7)
sendmail utility (Sec. 1.5.2.2)
Serial Line Internet Protocol
See SLIP
Server System MIB (Sec. 11.3.1.2)
setld command (Sec. A.2.8)
sh
See Bourne shell
shared directories, unsharing (Sec. 6.4.5.2)
shared memory, testing with shmx (Sec. 11.4.5)
sharing file system (Sec. 6.4.5)
modifying a share (Sec. 6.4.5)
mounting (importing) (Sec. 6.4.6)
using dxfileshare GUI (Sec. 6.4.5)
using dxfileshare GUI (Sec. 6.4.6)
shmx exerciser (Sec. 11.4.5)
show devices command (Sec. 2.4.1)
shutacct command syntax (Sec. 10.3)
shutdown command (Sec. 2.1)
shutdown command (Sec. 2.11)
shutdown command (Sec. 2.11.3)
changing to single-user mode (Sec. 2.6.2.1)
console (Sec. 2.11.3)
emergency (Sec. 2.11.5)
for backups (Sec. 9.5.4)
messages (Sec. 2.11.2)
power off (Sec. 2.11.3)
shutdown and reboot (Sec. 2.11.4)
SysMan Menu (Sec. A.2.11)
using halt flag (Sec. 2.11.3)
using halt flag (Sec. 2.11.5)
using reboot flag (Sec. 2.11.4)
warning users (Sec. 2.11.2)
single-user boot (Sec. 2.2.2)
single-user mode, accounting (Sec. 10.4.5)
sizer program (Sec. 4.3)
skel file (Sec. 7.3.1)
SLIP
configuring (Sec. 1.5.2.2)
SysMan Menu (Sec. A.2.5)
SMP (Sec. 2.7)
adding cpus (Sec. 2.7)
cpu-enable-mask attribute (Sec. 2.4.1)
enable cpu (Sec. 2.4.1)
rebooting failed processor (Sec. 2.7.1)
unattended reboots (Sec. 2.7.1)
snmp_request command (Sec. 11.3.3)
software installation
software license (Sec. 1.5.2.1)
software management
SysMan Menu (Sec. A.2.8)
sparse files (Sec. 7.3.2)
spooling
printer (Sec. 8.5.3)
queue (Sec. 8.5.3)
SRM console (Sec. 2.1.2)
SRM console (Sec. 9.7.5.1)
stack limit (Sec. 3.6.5)
standalone boot (Sec. 2.3.5)
mounting file systems (Sec. 2.3.5)
standalone system (Sec. 9.10)
starting the system (Sec. 2.12.3)
startup shell script syntax (Sec. 10.3)
static configuration (Sec. 4.6)
static routes (Sec. 1.5.2.2)
SysMan Menu (Sec. A.2.5)
storage (Sec. A.2.9)
storage management
StorageWorks command console
Storage_Management folder (Sec. A.1)
file system utilities (Sec. 6.4)
stty, setting (Sec. 1.11.2.1.2)
superblock (Sec. 6.1.4.2)
swap partitions (Sec. 6.3.3)
swap space
adding (Sec. 3.6)
allocating (Sec. 3.6.2)
correcting lack of (Sec. 3.6.5)
crash dump file (Sec. 14.3.4)
depletion (Sec. 3.6.3)
description (Sec. 3.6)
estimating requirements (Sec. 3.6.3)
selecting allocation method (Sec. 3.6.4)
SWCC
See StorageWorks command console
symbolic link (Sec. 6.2.2.1)
Symmetric Multiprocessing (Sec. 2.4.1)
sync command (Sec. 2.11)
sync command (Sec. 6.7.1)
sysconfig command (Sec. 3.5.1)
sysconfig command (Sec. 4.5.1)
determining subsystem type (Sec. 4.5.3)
syntax (Sec. 4.5)
unloading a dynamic subsystem (Sec. 4.5.4)
using for remote subsystem management (Sec. 4.5.7)
using to adjust the dump_sp_threshold attribute (Sec. 14.4)
using to set the dump_user_pte_pages attribute (Sec. 14.4.2)
sysconfigdb command
adding attributes with (Sec. 4.5.8.2)
deleting subsystem entries with (Sec. 4.5.8.6)
listing attribute values with (Sec. 4.5.8.1)
merging attribute definitions with (Sec. 4.5.8.3)
removing attribute definitions with (Sec. 4.5.8.5)
updating attribute definitions with (Sec. 4.5.8.4)
sysconfigtab file (Sec. 1.11.1.2)
sysconfigtab file (Sec. 4.5.8)
DCD timeout value (Sec. 1.11.1.2)
multiple versions (Sec. 4.5.8)
setting exempt memory (Sec. 14.4.6)
swap (Sec. 6.3.3)
swap space (Sec. 3.6.4)
syslog (Sec. 12.2)
syslog (Sec. 13.1)
and Event Manager (Sec. 13.1)
security (Sec. 12.2.2)
syslog.auth file (Sec. 12.2.2)
syslog.conf file (Sec. 12.2.1.1)
syslogd daemon (Sec. 12.1)
and Event Manager (Sec. 13.1.4)
console messages (Sec. 1.11.2.1.1)
starting (Sec. 12.2.4.1)
stopping (Sec. 12.2.4.1)
sysman -cli command (Sec. 1.7)
SysMan clients, launching from a PC (Sec. 1.10)
SysMan Menu (Sec. 1.0)
accessing from CDE front panel (Sec. 1.5.1)
account administration (Sec. A.2.1)
Accounts option (Sec. 7.2.3)
administering file system (Sec. 6.4)
administrative utilities (Sec. 1.5)
AdvFS (Sec. A.2.9)
AdvFS utilities (Sec. 6.4.1)
ATM (Sec. A.2.5)
bootable tape (Sec. A.2.9)
class scheduler (Sec. A.2.4)
configuring mail (Sec. A.2.3)
creating an UFS file system (Sec. 6.4.6.2)
DHCP (Sec. A.2.5)
dismount a file system (Sec. 6.4.2)
displaying mounted file system (Sec. 6.4.3)
DNS/BIND (Sec. A.2.5)
documentation (Sec. 1.5.1)
DOP (Sec. A.2.7)
file system utilities (Sec. 6.4.1)
file systems (Sec. A.2.9)
fstab file (Sec. 6.4.4)
gated (Sec. A.2.5)
hardware management (Sec. A.2.2)
host equivalence (Sec. A.2.5)
host file (Sec. A.2.5)
iostat command (Sec. A.2.4)
IP router (Sec. A.2.5)
LAT (Sec. A.2.5)
LDAP accounts (Sec. A.2.1)
LSM utilities (Sec. 6.4.1)
monitoring and tuning (Sec. A.2.4)
mounting file system (Sec. 6.4.4)
network administration (Sec. A.2.5)
NFS (Sec. A.2.5)
NIS (Sec. A.2.5)
NIS accounts (Sec. A.2.1)
NTP (Sec. A.2.5)
PPP configuration (Sec. A.2.5)
printers (Sec. A.2.6)
rwhod (Sec. A.2.5)
security (Sec. A.2.7)
shut down (Sec. 2.1.1)
shut down for backups (Sec. 9.5.4)
shutdown command (Sec. A.2.11)
SLIP (Sec. A.2.5)
software management (Sec. A.2.8)
static routes (Sec. A.2.5)
storage (Sec. A.2.9)
Storage option (Sec. 6.4.1)
UFS file system (Sec. A.2.9)
vmstat command (Sec. A.2.4)
SysMan Station
accessing from CDE front panel (Sec. 1.5.1)
AdvFS Filesystems view (Sec. 1.8.2)
CDE front panel icon (Sec. 1.5)
documentation (Sec. 1.5.1)
features (Sec. 1.8)
Hardware view (Sec. 1.8.2)
main window (Sec. 1.8)
menu options (Sec. 1.8.3)
Physical_Filesystems view (Sec. 6.4.1)
power management (Sec. 3.5.3)
shut down (Sec. 2.1.1)
status options (Sec. 1.8)
viewing devices (Sec. 6.4.7)
system
crash
See system crash
crash dump information created during reboot (Sec. 14.3)
customizing (Sec. 3.0)
hardware failure (Sec. 2.3.4)
messages (Sec. 11.1.2.4)
monitoring and testing (Sec. 11.0)
monitoring utilities (Sec. 11.1.2)
performance (Sec. 11.1.3)
setup
See system setup
startup files (Sec. 3.1)
system administration
configuration utilities (Sec. A.1)
daily admin applications (Sec. A.1)
Daily Administration tools folder (Sec. A.1)
file system applications (Sec. A.1)
methods (Sec. 1.3)
monitoring applications (Sec. A.1)
Overview of SysMan Menu (Sec. 1.1)
remote (Sec. 1.11)
software_management applications (Sec. A.1)
storage applications (Sec. A.1)
SysMan Menu (Sec. 1.0)
SysMan Station (Sec. 1.0)
system setup (Sec. 1.5.1)
tuning applications (Sec. A.1)
system administration tools (Sec. A.0)
accessing SysMan (Sec. 1.5.1)
system clock, setting (Sec. 2.7.2)
system configuration
accounts (Sec. A.2.1)
Custom Setup (Sec. 1.5.2.2)
DNS/BIND (Sec. 1.5.2.1)
documentation (Sec. 4.2.2)
dynamic (Sec. 4.5)
group file (Sec. A.2.1)
initial (Sec. 1.3)
kernel subsystem (Sec. 4.0)
network interface card (Sec. 1.5.2.2)
passwd file (Sec. A.2.1)
static (Sec. 4.6)
utilities for (Sec. A.1)
system configuration report (Sec. 11.1.2.4)
system crash (Sec. 12.3)
system crash (Sec. 2.3.4)
logging (Sec. 14.3.2)
recovery from (Sec. 2.3.4)
writing crash dump to (Sec. 14.3.4)
system event (Sec. 12.0)
system event (Sec. 13.1)
system exercisers (Sec. 11.4)
diagnostics (Sec. 11.4.1)
system files
archiving services (Sec. 9.5.1.3)
Event Manager (Sec. 13.1.3.3)
initialization (Sec. 3.1)
printer (Sec. 8.1.4.3)
system firmware
See firmware
system initialization (Sec. 2.6)
system logs, reviewing (Sec. 13.3.11)
system memory (Sec. 11.4.4)
system monitoring (Sec. 11.1.3)
collect utility (Sec. 11.1.2.5)
commands and utilities (Sec. 11.1.2)
HP Insight Manager (Sec. 11.1.2.4)
iostat command (Sec. 11.1.2.1)
iostat command (Sec. 11.1.2.4)
messages log (Sec. 11.1.2.4)
MPH (Sec. 11.2.3)
netstat command (Sec. 11.1.2.1)
netstat command (Sec. 11.1.2.4)
uptime command (Sec. 11.1.2.1)
vmstat command (Sec. 11.1.2.1)
who command (Sec. 11.1.2.1)
system power off (Sec. 2.11.2)
System Reference Manual console (Sec. 2.1.2)
System Server MIB daemon (Sec. 11.3)
system setup (Sec. 1.3)
system setup (Sec. 1.5.1)
account administration (Sec. 7.2)
overview (Sec. 1.5.1)
system shutdown (Sec. 2.1)
automatic reboot (Sec. 2.11.4)
degraded performance (Sec. 2.10)
during high threshold levels (Sec. 11.3)
emergency (Sec. 2.11.5)
environmental monitoring (Sec. 2.10)
fastboot (Sec. 2.12.3)
fasthalt command (Sec. 2.12.2)
file system corruption (Sec. 2.10)
for errors or events (Sec. 2.10)
for troubleshooting (Sec. 2.10)
from multiuser mode (Sec. 2.11)
fsck command (Sec. 2.1.5)
fsck warning (Sec. 2.11.4)
graphical interface (Sec. 2.11.1)
halt flag (Sec. 2.11.5)
methods and options (Sec. 2.1)
related system files (Sec. 2.1.4)
related utilities (Sec. 2.1.5)
remote system (Sec. 1.11.2.1.2)
system halt (Sec. 2.11.3)
using SysMan (Sec. 2.1.1)
system startup (Sec. 2.2)
system tuning (Sec. 4.4)
System_Admin folder (Sec. 1.4)
sys_check utility (Sec. 11.1.2.5)
sys_check utility (Sec. 11.2.1)
cron (Sec. 11.2.2)
escalation report (Sec. 11.1.2.4)
system configuration report (Sec. 11.1.2.4)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
T
tacct file errors, correcting (Sec. 10.9.2)
tape
backup (Sec. 9.1)
bootable (Sec. 9.4)
tape drive, uninstalled (Sec. 9.7.5.3)
tar command (Sec. 9.4)
tar command (Sec. 9.8)
target kernel (Sec. 4.3)
TCP/IP (Sec. 1.5.2.2)
configuring printing over (Sec. 8.3.1)
terminal communications system, testing with cmx (Sec. 11.4.6)
terminal line, securing (Sec. 3.1.1.6)
terminals (Sec. 3.1.1.4)
terminfo database (Sec. 3.1.1.4)
TERMINFO environment variable (Sec. 3.1.1.4)
testing the system (Sec. 11.0)
tic command (Sec. 3.1.1.4)
time zone (Sec. 3.3)
time, setting the (Sec. 2.7.2)
tip connection (Sec. 1.11)
total accounting record (Sec. 10.5.8)
troubleshooting
boot operations (Sec. 2.9)
event management (Event Manager) (Sec. 13.4)
files and file system (Sec. 6.8)
printer (Sec. 8.7)
shutdown (Sec. 2.10)
using sys_check (Sec. 11.2.2)
tunefs command (Sec. 6.7.3)
turnacct shell script (Sec. 10.5.2)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
U
uerf command, using with system exercisers (Sec. 11.4.2)
UFS file system
creating (Sec. 6.3.1)
creating (Sec. 6.4.6.2)
creating with diskconfig GUI (Sec. 5.1)
on LSM volume (Sec. 6.4.7)
quota files (Sec. 7.3.2)
setting file system quotas (Sec. 6.5)
sparse files (Sec. 7.3.2)
structure (Sec. 6.1.4)
utilities (Sec. A.2.9)
verifying (Sec. 6.7.1)
version (Sec. 6.1.3)
UID (Sec. 7.3.2)
UID (Sec. 7.6.2.3)
defaults (Sec. 7.3.3)
duplicate (Sec. 7.4.2.4)
limits (Sec. 7.3.3)
maximum number (Sec. 7.3.2)
/usr/include/limits.h (Sec. 7.3.3)
umount command (Sec. 6.3.5)
SysMan alternative (Sec. 6.4.2)
UNIX file system
See UFS file system
Unix to Unix Copy
See UUCP configuration
unmounting file system (Sec. 6.3.5)
update installation (Sec. 1.4)
upgrades (Sec. 2.10)
uptime command (Sec. A.2.4)
user (Sec. 7.3.4)
user account (Sec. A.2.1)
administration (Sec. 7.4)
user identifier
See UID
user name (Sec. 7.3.3)
user page table
including in partial crash dump (Sec. 14.4.1)
useradd command (Sec. 7.2.4)
userdel command (Sec. 7.2.4)
usermod command (Sec. 7.2.4)
/usr file system, restoring (Sec. 9.7.6)
/usr/include/limits.h file (Sec. 7.3.3)
/usr/include/limits.h file (Sec. 7.3.4)
/usr/skel file
See skel file
utmp file structure (Sec. 10.4)
UUCP configuration (Sec. 1.5.2.2)
uucpsetup utility (Sec. 1.5.2.2)
uugetty command
settings (Sec. 1.11.1.3)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
V
/var file system, restoring (Sec. 9.7.6)
/var/adm/crash directory
See crash directory
/var/adm/messages
See messages log
/var/yp/src/* files (Sec. 7.3.1)
vipw command (Sec. 7.1.4)
virtual memory
address space (Sec. 3.6.5)
data limit (Sec. 3.6.5)
description (Sec. 3.6)
per-process (Sec. 3.6.5)
stack limit (Sec. 3.6.5)
swap space (Sec. 3.6.5)
vm-swap-eager (Sec. 3.6.4)
vmstat command (Sec. 11.1.2.1)
vmstat command (Sec. A.2.4)
vmunix file (Sec. 2.1.4)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
W
wall command (Sec. 2.11)
wall command (Sec. 2.6)
WBEM (Sec. 1.9)
who command (Sec. 11.1.2.1)
who command (Sec. 7.1.4)
window manager (Sec. 1.5.2.2)
Windows 2000 Single Sign-On (Sec. 7.6.2)
Windows NT domain accounts (Sec. 1.5.2.2)
Windows NT domain server services (Sec. 7.2.5)
worldwide support (Sec. 3.3)
wtmp file
correcting with fwtmp command (Sec. 10.4.2)
wtmpfix command (Sec. 10.4.1)
wwpsof print filter (Sec. 8.6.2)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
X
X11 applications (Sec. A.1)
XDM configuration (Sec. 1.5.2.2)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
Y
year, setting the (Sec. 2.7.2)