HP Open Source Security for OpenVMS Volume 2: HP SSL for OpenVMS > CRYPTO Application
Programming Interface (API) Reference
This library implements dynamic hash tables. The hash table entries can be arbitrary structures. Usually they consist of key and value fields.
lh_new() creates a new LHASH structure to store arbitrary data entries, and provides the 'hash' and 'compare' callbacks to be used in organising the table's entries. The hash callback takes a pointer to a table entry as its argument and returns an unsigned long hash value for its key field. The hash value is normally truncated to a power of 2, so make sure that your hash function returns well mixed low order bits. The compare callback takes two arguments (pointers to two hash table entries), and returns 0 if their keys are equal, non-zero otherwise. If your hash table will contain items of some particular type and the hash and compare callbacks hash/compare these types, then the DECLARE_LHASH_HASH_FN and IMPLEMENT_LHASH_COMP_FN macros can be used to create callback wrappers of the prototypes required by lh_new(). These provide per-variable casts before calling the type-specific callbacks written by the application author. These macros, as well as those used for the "doall" callbacks, are defined as;
An example of a hash table storing (pointers to) structures of type 'STUFF' could be defined as follows;
lh_free() frees the LHASH structure table. Allocated hash table entries will not be freed; consider using lh_doall() to deallocate any remaining entries in the hash table (see below).
lh_insert() inserts the structure pointed to by data into table. If there already is an entry with the same key, the old value is replaced. Note that lh_insert() stores pointers, the data are not copied.
lh_delete() deletes an entry from table.
lh_retrieve() looks up an entry in table. Normally, data is a structure with the key field(s) set; the function will return a pointer to a fully populated structure.
lh_doall() will, for every entry in the hash table, call func with the data item as its parameter. For lh_doall() and lh_doall_arg(), function pointer casting should be avoided in the callbacks (see NOTE) - instead, either declare the callbacks to match the prototype required in lh_new() or use the declare/implement macros to create type-safe wrappers that cast variables prior to calling your type-specific callbacks. An example of this is illustrated here where the callback is used to cleanup resources for items in the hash table prior to the hashtable itself being deallocated:
When doing this, be careful if you delete entries from the hash table in your callbacks: the table may decrease in size, moving the item that you are currently on down lower in the hash table - this could cause some entries to be skipped during the iteration. The second best solution to this problem is to set hash->down_load=0 before you start (which will stop the hash table ever decreasing in size). The best solution is probably to avoid deleting items from the hash table inside a "doall" callback!
lh_doall_arg() is the same as lh_doall() except that func will be called with arg as the second argument and func should be of type LHASH_DOALL_ARG_FN_TYPE (a callback prototype that is passed both the table entry and an extra argument). As with lh_doall(), you can instead choose to declare your callback with a prototype matching the types you are dealing with and use the declare/implement macros to create compatible wrappers that cast variables before calling your type-specific callbacks. An example of this is demonstrated here (printing all hash table entries to a BIO that is provided by the caller):
lh_new() returns NULL on error, otherwise a pointer to the new LHASH structure.
When a hash table entry is replaced, lh_insert() returns the value being replaced. NULL is returned on normal operation and on error.
lh_delete() returns the entry being deleted. NULL is returned if there is no such value in the hash table.
lh_retrieve() returns the hash table entry if it has been found, NULL otherwise.
lh_error() returns 1 if an error occurred in the last operation, 0 otherwise.
lh_free(), lh_doall() and lh_doall_arg() return no values.
The various LHASH macros and callback types exist to make it possible to write type-safe code without resorting to function-prototype casting - an evil that makes application code much harder to audit/verify and also opens the window of opportunity for stack corruption and other hard-to-find bugs. It also, apparently, violates ANSI-C.
The LHASH code regards table entries as constant data. As such, it internally represents lh_insert()'d items with a "const void *" pointer type. This is why callbacks such as those used by lh_doall() and lh_doall_arg() declare their prototypes with "const", even for the parameters that pass back the table items' data pointers - for consistency, user-provided data is "const" at all times as far as the LHASH code is concerned. However, as callers are themselves providing these pointers, they can choose whether they too should be treating all such parameters as constant.
As an example, a hash table may be maintained by code that, for reasons of encapsulation, has only "const" access to the data being indexed in the hash table (ie. it is returned as "const" from elsewhere in their code) - in this case the LHASH prototypes are appropriate as-is. Conversely, if the caller is responsible for the life-time of the data in question, then they may well wish to make modifications to table item passed back in the lh_doall() or lh_doall_arg() callbacks (see the "STUFF_cleanup" example above). If so, the caller can either cast the "const" away (if they're providing the raw callbacks themselves) or use the macros to declare/implement the wrapper functions without "const" types.
Callers that only have "const" access to data they're indexing in a table, yet declare callbacks without constant types (or cast the "const" away themselves), are therefore creating their own risks/bugs without being encouraged to do so by the API. On a related note, those auditing code should pay special attention to any instances of DECLARE/IMPLEMENT_LHASH_DOALL_[ARG_]_FN macros that provide types without any "const" qualifiers.
The following description is based on the SSLeay documentation:
The lhash library implements a hash table described in the Communications of the ACM in 1991. What makes this hash table different is that as the table fills, the hash table is increased (or decreased) in size via OPENSSL_realloc(). When a 'resize' is done, instead of all hashes being redistributed over twice as many 'buckets', one bucket is split. So when an 'expand' is done, there is only a minimal cost to redistribute some values. Subsequent inserts will cause more single 'bucket' redistributions but there will never be a sudden large cost due to redistributing all the 'buckets'.
The state for a particular hash table is kept in the LHASH structure. The decision to increase or decrease the hash table size is made depending on the 'load' of the hash table. The load is the number of items in the hash table divided by the size of the hash table. The default values are as follows. If (hash->up_load < load) => expand. if (hash->down_load > load) => contract. The up_load has a default value of 1 and down_load has a default value of 2. These numbers can be modified by the application by just playing with the up_load and down_load variables. The 'load' is kept in a form which is multiplied by 256. So hash->up_load=8*256; will cause a load of 8 to be set.
If you are interested in performance the field to watch is num_comp_calls. The hash library keeps track of the 'hash' value for each item so when a lookup is done, the 'hashes' are compared, if there is a match, then a full compare is done, and hash->num_comp_calls is incremented. If num_comp_calls is not equal to num_delete plus num_retrieve it means that your hash function is generating hashes that are the same for different values. It is probably worth changing your hash function if this is the case because even if your hash table has 10 items in a 'bucket', it can be searched with 10 unsigned long compares and 10 linked list traverses. This will be much less expensive that 10 calls to your compare function.
lh_strhash() is a demo string hashing function:
Since the LHASH routines would normally be passed structures, this routine would not normally be passed to lh_new(), rather it would be used in the function passed to lh_new().
The lhash library is available in all versions of SSLeay and OpenSSL. lh_error() was added in SSLeay 0.9.1b.
This manpage is derived from the SSLeay documentation.
In OpenSSL 0.9.7, all lhash functions that were passed function pointers were changed for better type safety, and the function types LHASH_COMP_FN_TYPE, LHASH_HASH_FN_TYPE, LHASH_DOALL_FN_TYPE and LHASH_DOALL_ARG_FN_TYPE became available.