[Click Here] [Image][Image][Image][Image][Image][Image] [Image][Image] [Image][Image] [Image][Image] Leapfrog 1.0 Leapfrog will anonymize and redirect any port. It can be used to work around firewall configuration and other issues requiring a port redirect. Leapfrog will take any incoming connections and automatically send them to any other machine, any other port. For example, you have a firewall that Leapfrog 1.0 does not allow telnet (23), but it does allow http (80). Set leapfrog up on the other side of Contact Webmaster the firewall to listen on port 80 and send to 23, Advertising then telnet to port 80 of the leapfrog machine and you will ricochet to the machine you wish to [Image] connect. You will have the Leapfrog machines' IP Become a COTSE and MAC addresses. It supports unlimited users Affiliate (well, limited by memory). Leapfrog can be chained, reconfigured on the fly, and customized to change ports/machine redirects without the need to log into the box. It can be configured (with little work) to remove all traces of itself from disk after being loaded, or it can be configured to log everything (default). It supports colors and some basic admin tools. It is very fast. Leapfrog compiles on Solaris 2.6, 2.7, x86 (2.6, 2.7), Linux with pthread libs, BSD with pthread libs. Possibly others, but it wasn't tested on others. Download Leapfrog 1.0 Source [Image] [Image]