From: Hamlyn Mootoo [univms@bigfoot.com]
Sent: Friday, June 08, 2001 8:17 AM
To: Info-VAX@Mvb.Saic.Com
Subject: Re: NCP to NCL command equivilants

I second the motion. All those in favor say "aye".

HM

"Brian Schenkenberger, VAXman-" wrote:

> In article <00256A65.004351A2.00@quegw01.btyp>, Steve.Spires@yellgroup.com writes:
> >cc:
> >bcc:
> >Contact:   Tel: 3063  -  IS - Infrastructure, 1st Floor, Bridge Street Plaza
> >
> >NCP to NCL command equivilants
> >
> >
> >I have been following the thread regarding Phase IV and Phase V and thought this
> >might be useful to some, which either came originally from this newsgroup, or
> >DSN [if the formatting goes a bit haywire and makes it unreadable, I'll send it
> >as a text attachment to those who ask for it];
> >
> >
> >DESCRIPTION:
> >
> >Phase IV commands                   Phase V commands
> >---------------------------------   ---------------------------------------
> >NCP> CONNECT NODE <node-name>       $ SET HOST /MOP <node-name>
> >NCP> CONNECT VIA <circuit-name> -   $ SET HOST /MOP /CIRCUIT = -
> >     PHYSICAL ADDRESS <address>       <circuit-name> ADDRESS = <address>
> >NCP> COPY KNOWN NODES <parameters>  No conversion available
> >NCP> DISCONNECT LINK                NCL> SHOW NSP PORT * ALL
> >                                    NCL> DELETE SESSION CONTROL PORT -
> >                                         SCL$PORT$xxxxxxxx
> >NCP> LOAD NODE <node-name>          NCL> LOAD MOP CLIENT <node-name>
> >NCP> LOAD VIA <parameters>          NCL> LOAD MOP CLIENT <node-name> -
> >                                         CIRCUIT <circuit-name>
> >NCP> LOOP CIRCUIT <circuit-name> -  NCL> LOOP MOP CIRCUIT <circuit-name> -
> >     PHYSICAL ADDRESS <address>          ADDRESS <address>
> >                                    NCL> LOOP LOOPBACK APPLICATION NAME -
> >                                         <node-name>
> >NCP> SET EXEC NODE <node-name>      NCL> SET NCL DEFAULT ENTITY NODE -
> >                                         <node-name>
> >NCP> SET EXEC NODE <node-name>      NCL> SET NCL DEFAULT ENTITY NODE -
> >     USERNAME xxxx PASSWORD yyyy         node-name"xxxx yyyy"
> >NCP> SET KNOWN CIRCUITS ALL         NCL> @SYS$MANAGER:NET$ROUTING_STARTUP.NCL
> >NCP> SET KNOWN LINES ALL            NCL> @SYS$MANAGER:NET$CSMACD_STARTUP.NCL
> >NCP> SET KNOWN NODES ALL            No conversion available
> >NCP> SET KNOWN OBJECTS ALL          NCL>
> >@SYS$MANAGER:NET$APPLICATION_STARTUP.NCL
> >NCP> SET KNOWN PROXIES ALL          No conversion available
> >NCP> SET LINE <line-name>           NCL> DISABLE CSMA-CD STATION -
> >     STATE OFF                           <circuit-name>
> >NCP> SET LINE <line-name>           NCL> ENABLE CSMA-CD STATION -
> >     STATE ON                            <circuit-name>
> >NCP> SET MODULE CONFIGURATOR        NCL> SHOW MOP CIRCUIT <circuit-name> -
> >     <parameters>                        STATION * ALL ATTRIBUTE
> >NCP> SHOW CIRCUIT <circuit-name>    NCL> SHOW ROUTING CIRCUIT -
> >     CHARACTERISTICS                     <circuit-name> ALL
> >        adjacencies                 NCL> SHOW ROUTING CIRCUIT -
> >                                         <circuit-name> ADJACENCY *
> >        counters                    NCL> SHOW ROUTING CIRCUIT -
> >                                         <circuit-name> ALL COUNT
> >        service                     NCL> SHOW MOP CIRCUIT <circuit-name> -
> >                                         ALL
> >NCP> SHOW EXEC CHARACTERISTICS
> >        address                     NCL> SHOW ALL IDENTIFIERS
> >        on/off                      NCL> SHOW SESSION CONTROL ALL STATUS
> >        DECnet account, proxy       NCL> SHOW SESSION CONTROL ALL -
> >                                         CHARACTERISTICS
> >        Type                        NCL> SHOW ROUTING ALL CHARACTERISTICS
> >        Version                     NCL> SHOW IMPLEMENTATION
> >        max broadcast nonrouters    NCL> SHOW ROUTING CIRCUIT -
> >                                         <circuit-name> ALL
> >        max hops/visits/cost        NCL> SHOW ROUTING ALL    !routers only
> >NCP> SHOW KNOWN CIRCUITS            NCL> SHOW ROUTING CIRCUIT * ALL
> >NCP> SHOW KNOWN DTE                 NCL> SHOW X25 PROTOCOL DTE *
> >                                         ALL STATUS
> >NCP> SHOW KNOWN DTE -               NCL> SHOW X25 PROTOCOL DTE *
> >     CHARACTERISTICS                     ALL ATTRIBUTES
> >NCP> SHOW KNOWN LINE COUNT          NCL> SHOW CSMA-CD STATION * ALL COUNT
> >NCP> SHOW KNOWN LINKS               NCL> SHOW SESSION CONTROL PORT * ALL
> >NCP> SHOW KNOWN LOGGING             NCL> SHOW EVENT DISPATCHER OUTBOUND -
> >                                         STREAM * ALL
> >NCP> SHOW KNOWN NODES               NCL> SHOW ROUTING CIRCUIT -
> >                                         <circuit-name> ADJACENCY *
> >NCP> SHOW KNOWN OBJECTS             NCL> SHOW SESSION CONTROL APPLICATION
> >                                         * NAME
> >NCP> SHOW LINE <line-name> CHAR     NCL> SHOW CSMA-CD STATION
> >                                         <station-name> ALL
> >NCP> SHOW NODE <node-name>          $ RUN SYS$SYSTEM:DECNET_REGISTER.EXE
> >                                    DECNET_REGISTER> SHOW NODE <node-name>
> >        load file                   NCL> SHOW MOP CLIENT <node-name> ALL
> >NCP> SHOW OBJECT <object-name>      NCL> SHOW SESSION CONTROL APPLICATION -
> >     CHARACTERISTICS                     <object-name> ALL
> >NCP> TELL <node-name> [commands]    NCL> SET NCL DEFAULT ENTITY NODE
> >                                         <node-name>
> >                                    NCL> [commands]
> >NCP> TRIGGER NODE <node-name>       NCL> BOOT MOP CLIENT <node-name>
> >NCP> ZERO <paremeters>              No conversation available
> >
>
> I nominate this post for inclusion into the OpenVMS FAQ!
>
> PS.
> Thanks to Steve's posting, I would hope that others will see that the NCL
> command syntax is not all that difficult or verbose... just different.
>
> --
> VAXman- OpenVMS APE certification number: AAA-0001     VAXman(at)TMESIS(dot)COM
>
> city, n., 1. a place where trees are cut down and streets are named after them.