From: Steve.Spires@yellgroup.com
Sent: Friday, June 08, 2001 8:08 AM
To: Info-VAX@Mvb.Saic.Com
Subject: NCP to NCL command equivilants

cc:
bcc:
Contact:   Tel: 3063  -  IS - Infrastructure, 1st Floor, Bridge Street Plaza

NCP to NCL command equivilants


I have been following the thread regarding Phase IV and Phase V and thought this
might be useful to some, which either came originally from this newsgroup, or
DSN [if the formatting goes a bit haywire and makes it unreadable, I'll send it
as a text attachment to those who ask for it];


DESCRIPTION:

Phase IV commands                   Phase V commands
---------------------------------   ---------------------------------------
NCP> CONNECT NODE <node-name>       $ SET HOST /MOP <node-name>
NCP> CONNECT VIA <circuit-name> -   $ SET HOST /MOP /CIRCUIT = -
     PHYSICAL ADDRESS <address>       <circuit-name> ADDRESS = <address>
NCP> COPY KNOWN NODES <parameters>  No conversion available
NCP> DISCONNECT LINK                NCL> SHOW NSP PORT * ALL
                                    NCL> DELETE SESSION CONTROL PORT -
                                         SCL$PORT$xxxxxxxx
NCP> LOAD NODE <node-name>          NCL> LOAD MOP CLIENT <node-name>
NCP> LOAD VIA <parameters>          NCL> LOAD MOP CLIENT <node-name> -
                                         CIRCUIT <circuit-name>
NCP> LOOP CIRCUIT <circuit-name> -  NCL> LOOP MOP CIRCUIT <circuit-name> -
     PHYSICAL ADDRESS <address>          ADDRESS <address>
                                    NCL> LOOP LOOPBACK APPLICATION NAME -
                                         <node-name>
NCP> SET EXEC NODE <node-name>      NCL> SET NCL DEFAULT ENTITY NODE -
                                         <node-name>
NCP> SET EXEC NODE <node-name>      NCL> SET NCL DEFAULT ENTITY NODE -
     USERNAME xxxx PASSWORD yyyy         node-name"xxxx yyyy"
NCP> SET KNOWN CIRCUITS ALL         NCL> @SYS$MANAGER:NET$ROUTING_STARTUP.NCL
NCP> SET KNOWN LINES ALL            NCL> @SYS$MANAGER:NET$CSMACD_STARTUP.NCL
NCP> SET KNOWN NODES ALL            No conversion available
NCP> SET KNOWN OBJECTS ALL          NCL>
@SYS$MANAGER:NET$APPLICATION_STARTUP.NCL
NCP> SET KNOWN PROXIES ALL          No conversion available
NCP> SET LINE <line-name>           NCL> DISABLE CSMA-CD STATION -
     STATE OFF                           <circuit-name>
NCP> SET LINE <line-name>           NCL> ENABLE CSMA-CD STATION -
     STATE ON                            <circuit-name>
NCP> SET MODULE CONFIGURATOR        NCL> SHOW MOP CIRCUIT <circuit-name> -
     <parameters>                        STATION * ALL ATTRIBUTE
NCP> SHOW CIRCUIT <circuit-name>    NCL> SHOW ROUTING CIRCUIT -
     CHARACTERISTICS                     <circuit-name> ALL
        adjacencies                 NCL> SHOW ROUTING CIRCUIT -
                                         <circuit-name> ADJACENCY *
        counters                    NCL> SHOW ROUTING CIRCUIT -
                                         <circuit-name> ALL COUNT
        service                     NCL> SHOW MOP CIRCUIT <circuit-name> -
                                         ALL
NCP> SHOW EXEC CHARACTERISTICS
        address                     NCL> SHOW ALL IDENTIFIERS
        on/off                      NCL> SHOW SESSION CONTROL ALL STATUS
        DECnet account, proxy       NCL> SHOW SESSION CONTROL ALL -
                                         CHARACTERISTICS
        Type                        NCL> SHOW ROUTING ALL CHARACTERISTICS
        Version                     NCL> SHOW IMPLEMENTATION
        max broadcast nonrouters    NCL> SHOW ROUTING CIRCUIT -
                                         <circuit-name> ALL
        max hops/visits/cost        NCL> SHOW ROUTING ALL    !routers only
NCP> SHOW KNOWN CIRCUITS            NCL> SHOW ROUTING CIRCUIT * ALL
NCP> SHOW KNOWN DTE                 NCL> SHOW X25 PROTOCOL DTE *
                                         ALL STATUS
NCP> SHOW KNOWN DTE -               NCL> SHOW X25 PROTOCOL DTE *
     CHARACTERISTICS                     ALL ATTRIBUTES
NCP> SHOW KNOWN LINE COUNT          NCL> SHOW CSMA-CD STATION * ALL COUNT
NCP> SHOW KNOWN LINKS               NCL> SHOW SESSION CONTROL PORT * ALL
NCP> SHOW KNOWN LOGGING             NCL> SHOW EVENT DISPATCHER OUTBOUND -
                                         STREAM * ALL
NCP> SHOW KNOWN NODES               NCL> SHOW ROUTING CIRCUIT -
                                         <circuit-name> ADJACENCY *
NCP> SHOW KNOWN OBJECTS             NCL> SHOW SESSION CONTROL APPLICATION
                                         * NAME
NCP> SHOW LINE <line-name> CHAR     NCL> SHOW CSMA-CD STATION
                                         <station-name> ALL
NCP> SHOW NODE <node-name>          $ RUN SYS$SYSTEM:DECNET_REGISTER.EXE
                                    DECNET_REGISTER> SHOW NODE <node-name>
        load file                   NCL> SHOW MOP CLIENT <node-name> ALL
NCP> SHOW OBJECT <object-name>      NCL> SHOW SESSION CONTROL APPLICATION -
     CHARACTERISTICS                     <object-name> ALL
NCP> TELL <node-name> [commands]    NCL> SET NCL DEFAULT ENTITY NODE
                                         <node-name>
                                    NCL> [commands]
NCP> TRIGGER NODE <node-name>       NCL> BOOT MOP CLIENT <node-name>
NCP> ZERO <paremeters>              No conversation available



Steve Spires


[Information] -- PostMaster:
This transmission is intended solely for the addressee(s) and may be
confidential. If you are not the named addressee, or if the message has been
addressed to you in error, you must not read, disclose, reproduce, distribute or
use this transmission.

Delivery of this message to any person other than the named addressee is not
intended in any way to waive confidentiality.  If you have received this
transmission in error please contact the sender or delete the message.

Thank you.