From:	SMTP%"CMU-OpenVMS-IP@DRYCAS.CLUB.CC.CMU.EDU" 20-OCT-1994 13:31:45.02
To:	EVERHART
CC:	
Subj:	can't use remote X clients

Date: Thu, 20 Oct 1994 00:28:41 PDT
From: Trevor Johnson <trevor@hepnsf.csudh.edu>
Subject: can't use remote X clients
To: CMU-OpenVMS-IP@DRYCAS.CLUB.CC.CMU.EDU
Cc: trevor@hepnsf.csudh.edu
Errors-To: CMU-OpenVMS-IP-Request@DRYCAS.CLUB.CC.CMU.EDU
Reply-To: CMU-OpenVMS-IP@DRYCAS.CLUB.CC.CMU.EDU
Message-Id: <0098633A.00113380.1@hepnsf.csudh.edu>

I have a VAXstation running DECwindows and CMU, and I'd like to run X
clients on a Unix machine over TCP-IP.  When I do

>setenv DISPLAY "155.242.11.3:0.0"
>xclock

on the Unix side (155.242.11.3 being the VAX' IP address)

the VAX' disk churns a bit and I get the error

Error: Can't open display: 155.242.11.3:0.0

along with an entry in the TCP_ACTIVITY.LOG:

20-OCT-1994 00:06:51.79 SYN received for unknown port 6000 from <155.135.18.1>
20-OCT-1994 00:06:52.94 SYN received for unknown port 6000 from <155.135.18.1>


so I thought, "oh, there is no server defined for that port in my
internet.config" but the closest guess I could make or this was to
use the decw$transport_cmu.exe program.  I added a line to ip_startup.com:

$ Define/system/exec/NoLog TCP$XSRV           CMUIP_ROOT:[tekip]decw$transport_cmu.EXE

and a line to internet.config:

WKS:6000:XSRV:TCP$XSRV:NETWRK:NETMBX,TMPMBX,PHY_IO,CMKRNL,WORLD,SYSPRV:::::4:5

but this didn't work.  I think I did the things mentioned in the FAQ:

-copying decw$transport_cmu.exe to sys$library and making it executable
-installing it
-adding CMU to decw$private_server_setup.com
-rebooting
-changing my decw$smb_security.dat

and I also tried setenv DISPLAY "hepnsf:0" as well as 0.0.  Any ideas of
what I'm doing wrong?  It works fine if I want to display VMS clients on
the Unix machine.