================================================================================ Note 902.0 SysInfo V2.3 available No replies UTRUST::VDKLEIJ "John van der Kleij - dtn 838-2646" 40 lines 21-MAY-1996 03:53 -------------------------------------------------------------------------------- Hi, for your information I've made V2.3 of sysinfo available. Added feature is displaying device, memory and machinecheck errors when there are any. I also replaced VIRTUALPAGECNT for MAXBUF. Feel free to use it. There's a VAX and Alpha version available. You can find SYSINFO023.ZIP on UTRUST:: Cheers, John [Readme.txt] System Information V2.3 by JK Software © Sysinfo can operate in single shot mode or in collect mode. In an SMP system, it will display the available and active cpu's. On an Alpha, it will display the palcode and console version as well as the cpu clock frequency. In a cluster, it shows the number of members and cluster formation time. When there are device, memory or machinecheck errors, the total will be displayed in the upper left corner. (I/F/C) means Initial / Free / Contiguous. When in collect mode it will also display the current and maximum Buffered and Direct I/O's per second. Usage : sysinfo (option) or si Options are: [-? / -h] Prints this help message. [-c ] Collect interval between events. Default collect interval is 5 seconds. Without -c, it operates in single shot mode. [-pages] Display in pages. Default is pagelets.