From:	NORLMN::EVERHART     16-NOV-1995 10:45:29.93
To:	STAR::ZALEWSKI
CC:	EVERHART
Subj:	using cd burner



commands needed:


1. put disk to burn from in the server
..suppose it's dk7


set server state off
init dk7:   (or dk4: is other slot)
set server state on
create part dk7:fwv2 blocks 1242000 erase

(note you have to init the part. from vms if not using backup)

create service fwv2 for dk7:fwv2		!service name can differ
set server state on !be sure

from a vms sys, bind to fwv2 & move data


$ladcp bind fwv2
oops

$ladcp bind fwv2/write_enable
$mou/for dad20:  (whatever dad: unit was bound)
$back/image/trunc dka600: dad20:

wait for it to finish

$dism dad20:


back on infoserver

set serv state off

put cd in burner which is dk0:

record dk7:fwv2 dk0:

wait 33 minutes approximately & come back

When it reprompts you can record again.

To reenable normally


NotToniteHoney>reboot
really? yes

password of infoserver is ESS.

When it reboots you will need to set serv state on to make it
visible.