From:	CSBVAX::CSBVAX::MRGATE::"SMTP::CRVAX.SRI.COM::RELAY-INFO-VAX"  9-MAR-1989 18:13
To:	MRGATE::"ARISIA::EVERHART"
Subj:	TK50 and emulex QT13.


Received: From KL.SRI.COM by CRVAX.SRI.COM with TCP; Thu,  9 MAR 89 11:31:47 PDT
Received: from bu-it.BU.EDU by KL.SRI.COM with TCP; Thu, 9 Mar 89 11:09:33 PST
Received: by bu-it.BU.EDU (5.58/4.7)
	id AA15190; Thu, 9 Mar 89 14:05:58 EST
Date: Thu, 9 Mar 89 14:05:58 EST
From: gjc@bu-it.BU.EDU (George J. Carrette)
Message-Id: <8903091905.AA15190@bu-it.BU.EDU>
To: info-vax@kl.sri.com
Subject: TK50 and emulex QT13.

In an earlier message I reported a configuration problem I was having
with a vaxstation-II and various devices. The real problem was
that I didnt know the exact name of the VCB01, so did not bother to
include that in the SYSGEN CONFIG command I was using. Maybe I forgot
the DZ also, either way, if you leave out devices you may fail to
get the correct results.

Any time you are adding a device you want to autoconfigure properly
you *must* run SYSGEN CONFIG, since the computations required may be
too complicated to give in simple tables such as found in the Emulex
documentation or your memory. Even if this is the 100'th time you have
added a device to a VAX and you think you know what you are doing.


$ MCR SYSGEN
CONFIGURE
DEVICE> tk50 2
DEVICE> vcb01
DEVICE> dz11
DEVICE> rqdx3
DEVICE> ^Z [EXIT]

The resulting table then tells me what I should be setting
Device Name CSR VECTOR
UDA    PUA 772150 154 (this is my RD54 controller, DUA0: DUA1:)
TU81   PTA 774500 260 (this is the tk50, MUA0:)
DZ11   TTA 760100 300 (my TTY lines, TTAx:)
TU81   PTB 760444 310 (my emulex QT13, MUB0:)
VCB01  VCA 777200 320 (my vaxstation video board)

-gjc