
	QMT is the RSX Queue Maintenance Task.  The valid QMT
	commands are listed below.


              List  the  message  ids  in  the  QUEUE   and   the
              parameters  associated with the current QUEUE file.
              Note:  This only  lists  those  ids  that  will  be
              placed  into  the  QUEUE on the next QUEUE creation
              and  possibly  not  those  that  are  currently  in
              service.

                   MCR> QMT/LI


              Create a new QUEUE file with the message  ids  from
              the message id file and with a size of nnnn message
              blocks.

                   MCR> QMT/CR:nnnn


              Reset all pointers and clean up the  current  QUEUE
              file  (will basically deallocate all message blocks
              and  reset  all  message  id  list  heads).   Note:
              Dismount  the  ACP  from  the  device  ZQ0:  before
              performing the reset.


                   MCR>QMT/RE


              Add a new message id to the message id file.

                   MCR>QMT/IN/ID:<--16 character  message  id>/MX:<max
                   number of messages>


              Update the maximum  number  of  messages  that  are
              permitted in the message id subqueue in the message
              id file.

                   MCR>QMT/UP/ID:<--16 character  message  id>/MX:<max
                   number of messages>


              Delete a message id from the message id file.

                   MCR>QMT/DE/ID:<--16 character message id>


              Delete messages from the message id subqueue.   The
              ACP must be mounted to device ZQ0:

                   MCR>QMT/DL/ID:<--16 character  message  id>/MX:<max
                   number of messages>


              Perform a consistency check on the QUEUE file (will
              basically   traverse  the  message  links  in  each
              message id subqueue and free all  blocks  that  are
              marked as used but are not linked in any subqueue).
              Notes:  Dismount  the  ACP  from  the  device  ZQ0:
              before  performing  this  check.   Some link errors
              will result in an entire reset of the QUEUE file.

                   MCR>QMT/CON


              Mount the ACP to device ZQ0:

                   MCR>QMT/MOU


              Dismount the ACP from the device ZQ0:

                   MCR>QMT/DMO


              Display the message id listhead for  the  specified
              message id.  The ACP must be mounted to device ZQ0:

                   MCR>QMT/DID/ID:<message id>


              Display the QUEUE header.  The ACP must be  mounted
              to device ZQ0:

                   MCR>QMT/DQH
