AnalytiCalc Introduction and Notice:
This is "DISK 1" of the AnalytiCalc 320K version. "DISK 2"
is common to the two versions. The version of ANALY.EXE here needs
at least 320K to run. It is Disk 3 of the distribution kit as a whole.
AnalytiCalc requires at least 256K of RAM memory, at least one
360K diskette drive, and DOS 2.0 or 2.1 or later, on an IBM PC, XT, or
AT or compatible computer. It can support displays of widths from 40
to 132 characters (defaulting to 80). In some versions of MSDOS or
PCDOS, more than 256K is required, and the "320K version" of AnalytiCalc
requires at least that amount of memory to run. An 8087 or 80287 will be
used if present.
To see the documentation you need either a printer 80 columns wide
to print it, or an 80 column screen to view it on.
SOME DO-NOT'S
1. DO NOT use AnalytiCalc until you have read the documentation.
2. DO NOT forget to make regular backup copies of your database.
3. DO NOT exit (X) the program without saving your work if you
want it saved. (You will be asked to confirm you really want
to leave, however.)
GETTING STARTED.
If you haven't already printed the documentation, please do so
before trying to operate AnalytiCalc. Then, READ IT! You should
also make sure that you have placed a "write-protect" tab on your
AnalytiCalc distribution diskettes, so that they can't be
accidentally erased or overwritten.
You should now make a copy of your AnalytiCalc disks. These will
also serve as your "run-time" system diskettes.
Now print the document files ACSTART.DOC, README.DOC,
MANUSQ.HLP, PKGINS.DOC, and ANALY.TUT. MANUSQ.HLP will describe how
to unsqueeze the manual file. Unsqueeze it and READ IT before starting.
When you have read the manuals, boot Disk 1 and type
ANALY to fire up the spreadsheet system. Then run through the
tutorial to get a feel for it.
SOME MAXIMUMS AND MINIMUMS.
Minimum RAM Memory required ............................256K
Minimum Disk Drives required...............................1
Minimum Disk Storage required...........................360K
Number of Columns......................................18000
Number of Rows.........................................18000
Maximum Length of Formulas (characters)..................109
Number of cells that can be full at once...............18000
Number of simultaneous named areas permitted.............300
Number of scratch cells outside spreadsheet...............60
Precision of calculations (digits; 8 bytes used)..........16
Total maximum storage managed (bytes)..............2,113,020
Maximum depth of document nesting (outline processor)......4
Maximum number of parameters varying to goal seek..........8
Maximum record size for data files accessed as database..128
Maximum number of files namable in one sheet..........>18000
Maximum cell columns displayable on one screen............20
Maximum number of rows displayable in one display.........75
Maximum simultaneous different cell display formats per
sheet (taken from large set)...........................76
Length of format specification (characters)................9
INFORMATION ABOUT THE FILES ON THE ANALYTICALC DISKS
This information is provided so that you'll know the function of
each file in the AnalytiCalc system.
Files marked with * are part of the AnalytiCalc system;
others are extra utilities, included to help you in your use of
a PC. Files with + after them are believed to work only on close
compatibles of the IBM PC, XT, or AT. AnalytiCalc itself runs
on most MSDOS machines.
Distribution Disk 1,3 Files. (Note that Dist'n disk #1 files are the same
for AnalytiCalc 256K and AnalytiCalc 320K
except that ANALY.EXE is different and some
files are missing in each, so 3 disks are needed
for a complete kit.)
ANALYTCL CQD * Reference card for AnalytiCalc, squeezed.
BUFEXTEN COM Keyboard buffer extender. Allows type ahead of 150 chars
ANALY EXE * Main program of Spreadsheet/DB/WP system
CONFIG SYS CONFIG.SYS that loads BIGANSI.SYS
BIGANSI SYS * Modified ANSI.SYS that supports more defs than std.
AUXKPD TXT * File of escape sequences to initialize BIGANSI.SYS when typed
Note it also binds Ctrl F2 to @GRF.CMD to do graphs.
PCCHELP HLP * Online direct access HELP file
(Note: On this disk it's PCCHELP.HQP, squeezed. Use USQ
to unsqueeze it before trying to use AnalytiCalc.)
AKA CMD * One of the command files executing a keypad command
AKB CMD * ditto
AKD CMD * ditto
AKDA CMD * ditto
CPR CMD * ditto
TOEND CMD * ditto
WND CMD * ditto
SRCH CMD * ditto
HTX CMD * ditto
CCO CMD * ditto
CRW CMD * ditto
KER EQE Communications program, an old Kermit using IBM BIOS only.
SCHEDA PCC Part of US Federal Income Tax template for AnalytiCalc
KEYPAD DOC * Documentation on function key usage
ANALY TQT * Tutorial on use of AnalytiCalc as spreadsheet, SQUEEZED
AUTOEXEC BAT Demo Autoexec.bat that types AUXKPD.TXT to set up BIGANSI.SYS
SCHEDB PCC Part of US Federal Income Tax template for AnalytiCalc
SCHEDX PCC ditto
SCHEDY PCC ditto
1040 PCC ditto. Use @1040.PCC to fill in sheet if desired.
F1040 DOC ditto. Documentation on the pieces of US Income Tax template
PIE BAS * Piechart program for sections of AnalytiCalc spreadsheets
NOTICE TXT * This file. Documents new features and distribution policy/price.
F1040 CMD Part of US Federal Income Tax template
DPATH30 COM DOS PATH command extension. Handy if you run ANALY off mem disk
DPATH30 DQC Squeezed documentation of above. Use USQ.EXE to unsqueeze.
DIFF DOC Intelligent differences between 2 text files (or saved sheets)
DIFF EQE Squeezed executable. Use USQ to unsqueeze.
GRF BAT * Batch file that is used by GRF.CMD
DIFRW EXE * Utility to read or write DIF files from AnalytiCalc saved files.
DIFRDWRT FQR * sources for DIFRW.EXE, squeezed. Use USQ to unsqueeze.
SETUP CMD * Sets up BIGANSI from Analy with @SETUP.CMD
BUF160 ASM Source to keyboard buffer extender; may be better than BUFEXTEND
BUF160 COM Executable of above
PPLN* * * Project Planner system (registered users only)
EDIT DQC Manual for EDIT, condensed. Squeezed also.
Distribution Disk 2 Files:
MANUSQ HLP * Documentation on what's here and how to unsqueeze the .*Q* files.
USQ EXE * Unsqueeze utility to unsqueeze any file that's squeezed here.
DTC DQC Desktop Calendar documentaion, squeezed. Handy appointment keeper
DTC HQP DeskTop Calendar online HELP screen. Unsqueeze.
DTC EQE DeskTop Calendar program. Use for all your timekeeping, appts.
README 1ST * Initial documentation
F1040 PQC Part of US Federal Income Tax system; saved worksheet, squeezed
PKGINS DOC * How to install the package
ACSTART DOC * More startup information
GRF BQS * Line chart, fitting, and scattergram program.
ANALY MQN * AnalytiCalc manual file, squeezed. Full reference manual + index.
EDIT EQE + A screen editor. Simple but fast and handles any size file.
ANALY TQC * Approximate table of contents for AnalytiCalc manual (squeezed)
LST COM + Screen lister. Very fast listings to screen of a file.
CPM EQE CP/M-86 SSDD disk read/write/etc. under MSDOS. Squeezed.
ZERO EQE CP/M-86 SSDD disk initialize CP/M directory structure, squeezed
EDIT DQC Brief doc file for EDIT above. Squeezed.
ACGRAF EXE * Histogram and scatterplot utility for AnalytiCalc.
IDENT TXT * Identifies disk.
GRF CMD * Command file to generate graphs from inside AnalytiCalc
ACINIT PRM * Sample auto start Analy file.
SOME FREQUENTLY ASKED QUESTIONS:
1. Why are you marketing AnalytiCalc in this way? ANSWER: We wanted
to sell AnalytiCalc at $49.95 but advertising is quite expensive
and dealers are reluctant to sell good inexpensive software and
make smaller per-sale profits when they can sell the $500 +
programs and make more per sale. We felt that programs like 1-2-3
are grossly overpriced and wanted to provide a far more powerful
one at a reasonable price as a service to other PC users. So we're
trying the user-supported route in the hope the user community will
appreciate this and support the effort. The full (and full speed)
version is available to direct customers or those who register;
PC public domain libraries receive a full function but somewhat
slower version of AnalytiCalc.
2. "Will it help if I buy more RAM memory for my PC?" ANSWER:
Extra memory beyond 256K (or 320K if you have that version)
is useful for handling other DOS commands under control of
AnalytiCalc, but is not otherwise used. If you want to speed
the program up, you can use additional memory as a memory disk
and keep AnalytiCalc's page files there (by making the memory
disk your default when you run Analy). You can also speed the
program considerably by adding an 8087 to your system.
3. "In what language was AnalytiCalc written?" ANSWER: It was
written in FORTRAN, then compiled with the Microsoft Fortran 77
Compiler, V3.3. There are also some assembler subroutines.
4. "Can I obtain the source code for the program?" ANSWER: Yes, if
you are willing to sign a license agreement and pay $2000.
A more limited source kit, containing the object libraries
and enough sources to add commands and functions, is available
(once you sign a license) for $1000.
5. "What is your update policy?" ANSWER: I'll notify all
registered (contributing) users whenever a new version of
AnalytiCalc becomes available. The cost of an update will
usually be $10 (to registered users). If you aren't a
contributing user you won't receive notification of updates
and will miss out on some programs to be offered to registered
users only. Registering users receive the latest and most debugged
version of AnalytiCalc, plus extra programs (e.g., a project planning
system) not placed on demonstration copies like this.
6. "What else are you working on?" ANSWER: There is a
full blown relational DBMS which will soon have an interface to
AnalytiCalc from it. It will be available along with upgrades
to AnalytiCalc (so register!) but will work standalone also.
The DBMS is available, with all sources and documents on disk
plus an .EXE for a 400K or so system from G.C.E. for an additional
$25.00 with an AnalytiCalc order or $30.00 by itself. It is in
"AS IS" condition as it is undergoing continual improvements.
The database interface will be quite comprehensive. Some other
utilities will also be provided.
7. "What computers does AnalytiCalc run on?" ANSWER: It's known
to run on the following "MS-DOS" computers:
RUNS ON:
------------------
CHAMELEON
COLUMBIA 1600-4
COMPAQ
CORONA
EAGLE 1630
IBM PC,XT,AT,jr
LEADING EDGE
SPERRY
TANDY 2000
TAVA
Please let us know what other computers the program does or does not
run on. We believe it will run also on DEC Rainbow, AT&T PC, and
most other MSDOS machines. Either ANSI controls via a driver like
ANSI.SYS or firmware, or an IBM compatible BIOS call for writing
directly to screen, are all that is required for screen operation.
Up to an extra 128K of RAM may be required for some 8088
based machines to run AnalytiCalc over the quoted sizes. This
depends on the machine's use of memory. The Tandy 2000 and IBM PCjr
are two that need extra memory due to large demands by their BIOS
and/or display systems. The Sanyo PC also needs more memory.
8. "Why should I pay?" ANSWER: First, because it's the right thing
to do. We're not cheating you. If you use the program regularly,
you should reciprocate by not cheating us of a modest reward for
the effort. Also, if you register, you get the latest version of
the program plus some extra files not available in demonstration
versions. We will also, IF you register, try to help you with any
problems. Those who don't pay won't get answered. You'll also get
a faster version of AnalytiCalc by registering. We're trying to
provide the best bargain in the industry. Help us out. We'll make
it worth your while.
DISCLAIMER.
In no event will the Author be liable to you for any damages,
including any lost profits, lost savings or other incidental or
consequential damages arising out of the use of or inability to use
these programs, even if the Author has been advised of the
possibility of such damages, or for any claim by any other party.
PERMISSION TO COPY:
Individuals are granted permission by the author to freely copy the
AnalytiCalc programs and documentation for their own use or to
share with others, so long as no price or other consideration is
charged. However, all PPLN*.* files must be deleted prior to copy
for others.
Computer clubs and other non-profit organizations are granted
permission by the author to freely copy the AnalytiCalc programs
and documentation and share it with their members, so long as:
1. No price or other consideration is charged. However, a
distribution cost may be charged for the cost of the diskettes,
so long as it is not more than $30 total for the 3 disks.
2. Club members are informed of the user-supported concept and
encouraged to support it with their donations.
3. The program or documentation are not modified in any way and
are distributed together.
4. The author must be informed of the insertion of AnalytiCalc into
any library that sells disks (regardless of price) to non
members and must have the right to update AnalytiCalc in such
a library. (This will permit us to keep AnalytiCalc relatively
current there.) Instructions on how to update AnalytiCalc in
such libraries must be provided.
Companies are granted permission by the author to copy the Analyti-
Calc programs and documentation for use on other computers and at
other locations in the company, so long as:
1. The full registration fee of $49.95 has been paid for the original
copy of the program.
2. A usage fee of $45 is paid for each additional "building" where
AnalytiCalc will be used. Within any building for which the
usage fee has been paid, AnalytiCalc may be copied freely for
use on any computer in that building.
Users who register will obtain the latest version of the software,
including some project management utilities that go with it, and
all bug fixes to that point. The project management software is
not part of the evaluation kits.
THE USER-SUPPORTED CONCEPT.
User-Supported Software
You are encouraged to copy and share this program with others.
If after evaluating this program you find it to be useful,
I trust you to send a $49.95 payment.
Glenn C. Everhart
25 Sleigh Ride Rd.
Glen Mills, Pa. 19342
User-supported software is an experiment in distributing computer
programs, based on these beliefs:
1. That the value and utility of software is best assessed by the
user on his/her own system.
2. That the creation of personal computer software can and should
be supported by the computing community.
3. That copying of programs should be encouraged, rather than
restricted.
Anyone may legally obtain an evaluation copy of the program from a
friend or computer club. After you've had a chance to use and
evaluate the program in your own environment, you're trusted to
either forward a payment to the author, or to discontinue use of
the program. In any case, you are encouraged to copy the program
for evaluation by others.
Free distribution of software and voluntary payment for its use
eliminates costs for advertising and copy protection schemes.
Users obtain quality software at greatly reduced cost. They can try
it out before buying, and do so at their own pace and in the
comfort of their own home or office. The best programs will
survive, based purely on their quality and usefulness.
Please join the experiment.
If you believe in these ideals, your contribution is solicited to
help make them work.
Many prefer a written invoice so that payment can be initiated
through company accounting systems. The following invoice is
provided for those in this category. You may keep it for your
tax records if desired.
--------------------
INVOICE
--------------------
Purchased from:
Glenn C. Everhart Federal ID # 221329700
25 Sleigh Ride Rd.
Glen Mills, Pa. 19342
DATE: / / Invoice No. 850715
-----------------------------------------------------------
PRICE PRICE
PRODUCT QTY EACH EXTENDED
------------------------- --- ----- --------
"AnalytiCalc - 88"
version 21.2 --- $49.95 $ 49.95
-------
Usage fee for additional
copies (each building) $45 $
--- -------
PCRIM DBMS kit (3 disks)
($30 if no Acalc order) $25.00 $
--- -------
6.0% state sales tax $
(New Jersey state residents) -------
TOTAL: $
-------
Please make check payable to : Glenn C. Everhart
You may retain this Invoice for your tax records.